Could you send also the kernel you used? I'd like to test if my cross
compiler is well installed.
( Now it has turned to be a life or death thing... i have to compile my
own kernel and boot linux on my pda! :p )
JeDi wrote:
I'll send the files when I'm in Belgium again, we're at a conference
in France for the moment.
So, patience please :-)
Greetz,
JeDi
On 11/27/05, Angel Sánchez Morales <[EMAIL PROTECTED]> wrote:
I'm not feeling lucky... :(
With Fisherss kernel tree there doesn't appear anything about linux when
booting the kernel. I downloaded the CVS version of the kernel from
handheld.org (saturday at night) and i make all the changes and update
the aximx30_lcd.c file, but when making zImage it gives the following error:
CC arch/arm/mach-pxa/aximx30/aximx30.o
arch/arm/mach-pxa/aximx30/aximx30.c:288: warning: implicit declaration
of function `MAINTAINER'
arch/arm/mach-pxa/aximx30/aximx30.c:289: error: initializer element is
not constant
arch/arm/mach-pxa/aximx30/aximx30.c:289: error: (near initialization for
`__mach_desc_X30.boot_params')
arch/arm/mach-pxa/aximx30/aximx30.c:289: error: parse error before
"BOOT_MEM"
arch/arm/mach-pxa/aximx30/aximx30.c:289: error: parse error before ')' token
arch/arm/mach-pxa/aximx30/aximx30.c:58: warning: 'x30_map_io' defined
but not used
arch/arm/mach-pxa/aximx30/aximx30.c:63: warning: 'x30_init_irq' defined
but not used
make[2]: *** [arch/arm/mach-pxa/aximx30/aximx30.o] Error 1
make[1]: *** [arch/arm/mach-pxa/aximx30] Error 2
make: *** [arch/arm/mach-pxa] Error 2
Then i replaced the aximx30.c file from the CVS sources with the file
from Fisherss kernel tree, and there's the same error.
I think i'm gonna go crying xD
Can you send me the kernel image?, i'd like to see the penguin inside my
x50v :p
JeDi wrote:
On 11/26/05, Angel Sánchez Morales <[EMAIL PROTECTED]> wrote:
hi, i activated mirror mode (winCE says it degrades performance,
doh...) and used the source that is on Fisherss's webpage, about the
addresses there are some that are different as written in the howto
for compiling the kernel, so i didn't know what to change and
suppoused that it was more updated than the howto :p
Mirror mode degrades performance in Windows Mobile, but my guess is
that it has to be activated because it sets some flags on some chip.
Or the rendering switches from hardware accelerated (through the intel
2700G chip that we don't seem to get working in linux) to software
mode (which could make sense because we can use the existing drivers
then). Anyway, it has to be activated to get this working.
The source I used was from the cvs tree of the handhelds.org kernel,
in Fisherss' code, the values are indeed already changed. I don't know
exactly from when the sources that I tried are, I just tried the
sources that were hanging around at my harddrive at that moment.
Maybe you should try the handhelds.org cvs kernel too? Look in the
wiki for instructions.
Good luck!
Greetz,
JeDi
--
_______________________________________________
Aximx50-port mailing list
[email protected]
https://www.handhelds.org/mailman/listinfo/aximx50-port
--
_______________________________________________
Aximx50-port mailing list
[email protected]
https://www.handhelds.org/mailman/listinfo/aximx50-port