Well, I decided to have a go at it. Rather than screwing around in my registry, I just modified the dumper to save to a SD card.
Anyhow, I named the file .nb0, did a CRC for it (using a derivative of CRC32), and selected the image. The SD Image Update tool said to hit the center button to confirm, or wait 3 seconds to cancel. Upon confirming, I don't see anything happening. It seems to be hanging there. I don't know if it's just taking a long time to flash, if I've bricked it, or if it's the fact that I tried to put a WM2005 ROM on a WM2003 device. I'm going to let it work for another 15 minutes or so before I reset it. For those who have been working on CRCs, what happens if the CRC is wrong? Does it actually give an error message? On 11/29/05, tcpaulh <[EMAIL PROTECTED]> wrote: > A few of us over at aximsite.com have found a method of dumping the ROM on a > Dell Axim X50v Pocket PC and then reflashing it via an SD card. This will > allow users with 'bricked' out of warranty Axims a chance to reflash their > devices when they are unable to use activesync. It also hopefully > contributes to the linux project. > > The main stumbling block at the moment is that we need a working CRC file > but cant find out from Dell which CRC algorithm they're using. We're hoping > with a bit of luck that they're using one of the common implementations. > > In a nutshell we have a file that refuses to be written to ROM without a > valid accompanying .CRC file and wonder if you know what format Dell use for > the .CRC file? An alternative approach would be to find the bootloader code > and reverse engineer/decompile it to see how it parses the required .CRC > file. > > > Best Regards > Paul Hanlon > > --------------------------- > > Here's a little more background information :- > > Dell have provided a method but not the necessary files :- > -------------- > Follow these steps to install > > 1. Copy the image file (*.nb0) and the corresponding CRC file to one SD card > root directory (the SD card must be formated as FAT32). > 2. Insert that SD card into PDA > 3. Hold "Power" + "Wireless" + "Reset" simultaneously for one second. > Release "Reset" and hold the other two buttons until system comes up a > screen for SD Update Mode. > 4. Use the navigator (Up or Down) to select which image you want to update > if more than one valid image existing on the SD card > 5. Wait till reflash completes. > > Note: If the card cannot be recognized, or no file is found, please > re-format the SD card and repeat the above steps. > -------------- > Dumping the ROM > > We've had a good bash at recreating a suitable diag.nb0 by dumping the ROM > using grab_it_128.exe from > http://forum.xda-developers.com/viewtopic.php?t=22861 but > the bootloader flash app on the Axim just sits there doing nothing with it. > I think we need to create a suitable .CRC file. > > *Note* before dumping the ROM, the SD card needs to be renamed "Storage > Card" > 1. Goto this registry Section [HKEY_LOCAL_MACHINE\System\ > StorageManager\Profiles > \SDMemory] > 2. Change the Value of "Folder" to "Storage Card" > > Not knowing which CRC algorithm Dell favour I created a CRC32 plaintext file > like :- > > > ----- > CRC Values for diag.nb0 > > diag.nb0 -- 1293EAB9 > ------ > > ...and named this diag.crc but this doesn't appear to be the correct format. > > I understand that some crc standards also incorporate the file length which > is 62,601,657 bytes. > > The discussion at aximsite can be found here :- > http://www.aximsite.com/boards/showthread.php?t=105233&page=3 > -- > _______________________________________________ > Aximx50-port mailing list > [email protected] > https://www.handhelds.org/mailman/listinfo/aximx50-port > > > -- _______________________________________________ Aximx50-port mailing list [email protected] https://www.handhelds.org/mailman/listinfo/aximx50-port
