I'm not used on kernel driver/modules so don't take me much serious :p
I don't understand these things:
x_new = (x - 141)*800/3662;
y_new=600 - (y - 197)*600/3630;
If x_new and y_new would be final coordinates on the screen we have this:
((x_new*3662)/800) + 141 = x
(((-y_new + 600)*3630) / 600) + 197 = y
Calculating possible values of x_new and y_new we have:
x_new x y_new y
0 141 0 3827
240 1239.6 240 2375
320 1605.8 320 1891
480 2338.2 480 923
640 3070.6 640 -45
the x coordinate seems incremental, while the y one decremental... which
is not much common, because usually the coordinate 0,0 is the most
top-left pixel and not the most below-left. I mean, if y goes from top
to bottom the screen the increment should be positive, but if y goes
from bottom to top should be negative.
Also the negative value of y at the 640 position is quite strange.
I'd try to guess the correct values of x and x_new, and y and y_new
making some printk() when getting the values once the screen is touched.
Touch the most top-left part of the screen and those would be the values
of 0,0, then, the most bottom-right would be the values 480x640 or
640x480 depending on the orientation of the screen (240x320 and 320x240
for x50). With those values we could find the formula to use to convert
raw coordinates to "user" coordinates.
Also a strange thing is why in the formula is used the values 800 and
600, that's a higher resolution that our pda supports; i can only think
that it is well done if the touchscreen controller uses a virtual screen
of 800x600 or 600x800 for placing coordinates.
Another thing is this:
input_report_abs(&ts_data->input, ABS_X, x_new & 0xfff);
input_report_abs(&ts_data->input, ABS_Y, y_new & 0xfff);
input_report_abs(&ts_data->input, ABS_PRESSURE, 0xfff);
input_sync(&ts_data->input);
input_report_abs(&ts_data->input, ABS_X, 70);
input_report_abs(&ts_data->input, ABS_Y, 100);
input_report_abs(&ts_data->input, ABS_PRESSURE, 0);
input_sync(&ts_data->input);
Why you put nearly the same data 2 times on the same sync.
And this is all i find strange, apart from some things that i totally
don't understand :p
Fisherss wrote:
here are the two drivers I wrote (in the attachments).
Angel Sánchez Morales wrote:
I can take a look at it. Tell me which source files are used and i'll
look for something.
On 12/5/05, Fisherss <[EMAIL PROTECTED]> wrote:
Actually we will have a basically useful linux system after the touch screen
driver being finished. But it really makes me crazy............
I can't tranfer the coordinate data to OPIE anyway, it doesn't give me any
reaction.
Does anyone in this list know how to fix this problem?
---------
Fisherss
[EMAIL PROTECTED]
------- Original Message -------
From: Filipe Cardoso Lana <[EMAIL PROTECTED]>
To: The porting effort for the Dell Axim x50 <[email protected]>
Sent: 05-12-5, 2:37:20
Subject: Re: [Aximx50-port] Re: hey, answer from pepper linux
yes fisherss, pepper pad is almost the same hardware as x50v.
same processor, same video chip, and maybe the same i/o, wifi, bt,
touchscreen. the pepper pad has a 20gb hdd, 8.4 inch touchscreen,
and 256mb of ram...
Fisherss <[EMAIL PROTECTED]> escreveu:
Oh~~~~ , that's cool !
So we can use a fully functional Linux system more quickly, and it will
save lot of our time. When will they release the code ?
Angel S?hez Morales wrote:
Yup, that thing is using nearly the same hardware as our loved pda :p
A PXA270, 2700G, and probably some more things.
Jorge Schrauwen wrote:
I the drivers work i guess so right?
On 12/3/05, Fisherss wrote:
Oh, do you guys mean that the pepper linux can be used on Axim ?
Angel S?hez Morales wrote:
As far as i know, you only need an ARM compiler for your OS and cross
your fingers and hope that there's no machine independent code :p
Jorge Schrauwen wrote:
Nice... but a special compiler is needed? or wil de normal gcc be
fine?
On 12/1/05, Jay Coles wrote:
If you have the source then all you need is a
recompile, the only exception bieng anything that
relies on asembbly as its normally x86 or things like
Xen which are highly hardware dependent (i hear that
they are intrested in an ARM port)
Jay Coles
[EMAIL PROTECTED]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /"\
ASCII Ribbon Campain against \ /
HTML e-mail and postings. X
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ / \
Intel P4 with HT* technology
* - Hyper Thrashing, burn cache burn
__________________________________
Yahoo! Mail - PC Magazine Editors' Choice 2005
http://mail.yahoo.com
--
_______________________________________________
Aximx50-port mailing list
[email protected]
https://www.handhelds.org/mailman/listinfo/aximx50-port
--
~Jorge
--
_______________________________________________
Aximx50-port mailing list
[email protected]
https://www.handhelds.org/mailman/listinfo/aximx50-port
--
~Jorge
--
_______________________________________________
Aximx50-port mailing list
[email protected]
https://www.handhelds.org/mailman/listinfo/aximx50-port
---------------------------------
Yahoo! doce lar. Fa硠do Yahoo! sua homepage.
--
_______________________________________________
Aximx50-port mailing list
[email protected]
https://www.handhelds.org/mailman/listinfo/aximx50-port
--
_______________________________________________
Aximx50-port mailing list
[email protected]
https://www.handhelds.org/mailman/listinfo/aximx50-port