If in the kernel says sda, then the device is sda :p
When you insert your SD card you have to wait a little and there will be
some /dev/sda1 device, which is the one you have to mount. But in the
fisherss way this would be /dev/sda.
Eduardo Alvarez wrote:
Hi All!
I've been following the progress around a few months, and now I can test it
by myself.
I having big trouble with a multicard reader for my SD card on linux.
I don't have linux installed, but I'm using knoppix live CD 4.0.02.
The problem is the card reader is detected, but only recognizes 1 of 3 card
slots.
The first slot is for smartmedia cards, the second is for
sd/mmc/memorystick, so I cannot get access to the sd slot.
I read an al info in the knoppix forums about for multicard readers you must
to recompile the kernel for probe all lun's, but another says that passing
this parameter to the boot prompt solves the issue:
knoppix 2 max_scsi_luns=3
the first boots the kernel image, the second is the initialization level
(text only) and the third passes the flag to scan 3 luns to the kernel.
Since this usb multireader card is the only scsi emulated or real device
there's no needed a major number of luns, even tough, I tried passing over
12.
But the problem persists, the device is detected as usb mass storage device
with SCSI emulation, but at the dmesg output:
Attached scsi removable disk sda at scsi2, channel 0, id 0, lun 0
And it supposed my sd slot would be /dev/sdb but no more info lines at
dmesg.
Obviously when I tried to pass fdisk -l /dev/sdb nothing has to see.
Some one knows what flags has to be writed in a boot prompt?
I'm using the knoppix 4.0.02 kernel 2.6.6.
Thanks by the advance!
Eduardo
--
_______________________________________________
Aximx50-port mailing list
[email protected]
https://www.handhelds.org/mailman/listinfo/aximx50-port