Hi!

In Fisherss webpage you have all the cable connections for making the serial cable. The application would be minicom, whe you connect minicom to /dev/ttyS0 (depends where is the serial cable connected) you'll see the output, you don't need to rebuild the kernel as fisherss has already built it so he gets output from it; the most important part is in the kernel line when it says cmdline="blah blah", this says where the terminal will be outputted, it's already set to ttyS0 with some parameters of bitrate and so.

What stops us from reading from the usb port is... time :p
I was looking at the manual of the intel pxa27x chipset and saw some things related to the usb client and host, but i don't have much time to dedicate to learn where i have to put things in the kernel, and what values must have some variables and so.

On 10th I'll start a new job as a developer, let's see if i have more free time in the future :)


jon will wrote:
Hello, I have a x50v and I just got linux + opie up
and running. I noticed the touch screen wasn't very
accurate. Anyways if I were to build one of these
serial cables, what program would I use on my desktop
system to see the output of the axim? Would I need to
rebuild the kernel for the axim to get it to output
info to the serial cable or does it output to that
port all the time? What exatcly stops us from reading
this from the usb port like when its plugged into the cradle?

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com
--
_______________________________________________
Aximx50-port mailing list
[email protected]
https://www.handhelds.org/mailman/listinfo/aximx50-port

Reply via email to