On 4/11/06, Michael Cutler <[EMAIL PROTECTED]> wrote: > If I remember correctly, the coordinate processing stuff in the kernel > driver - which translates the chips output into useful coordinates - was > using a linear function; however observations of how it reacted with the > stylus suggested that the chip is producing a non-linear output.
I kinda expected that, otherwise it would have worked a long time ago. We should get some more information about the hardware in some kind of technical documentation (intel has a _lot_ of these). > I hacked the driver to output the coordinates and plotted them in Excel, > the idea being I could extrapolate a function to scale coordinates > correctly; I didn't have the time to finish this analysis though. That's a great idea! That way we could at least get a semi-correct result. Don't forget to post the graphs or tables on your blog ;-) > Another thing I noticed was that if you think of the screen area as 4 > quarters, the accuracy in each quarter with the existing driver varied > wildly. The top-left quarter was the most accurate, loosely following > the stylus; however when reaching the invisible border to the next > quarter the coordinates went way off. > > This got me thinking that the physical implementation of the touchscreen > chip may be a 'hack' to provide the VGA resolution with an inferior > chip. Never took this much further than a thought and a TODO to find > other handhelds using the same chip. If there are discontinuities at some points on the touchscreen, that would make it much more difficult to find a correct solution, unless we know exactly where the "borders" are, we can just search for a mapping function for each area. > I need to repair my serial cable, but I would like to invest more time > in getting it working ;) If I only had a serial cable. But I thought I saw a axim-to-gps serial cable here at work somewhere. Would that work without modifications? If not, what do I need (hardware I mean) to get it working? > The handhelds.org project has a couple of calibration apps in their CVS > that can be butchered to suit if not simply reused. The distribution on > my site has both in it, first-clean boot should popup the calib stuff, > but i have no idea if the calib data is being used by anything. If we really need a special case calibration program, editing one of those would be much easier than writing one from scratch. I'll see if I can invest some time in this this night, but I'm not sure of that :-( Greetz, JeDi -- _______________________________________________ Aximx50-port mailing list [email protected] https://www.handhelds.org/mailman/listinfo/aximx50-port
