On 4/7/06, mariusing <[EMAIL PROTECTED]> wrote:
>
> have any one ever succeeded in booting to linux with x50v without the serial
> cable?
>
> could u please post all the file needed? or at least a link to the file?
> and as well as some key steps?

Hi,

You clearly didn't follow this mailing list the last week :-)
We just got usb networking up and running, so you can boot into linux
and log into it using ssh and your usb sync cable. The touchscreen
isn't working for the moment, but it will in the near future, as most
of the drivers are already written (just not included in the
handhelds.org kernel yet).

Just put the files from here on an sd card:
http://lumumba.uhasselt.be/~jedi/x50v-linux/package/
The x50v-rootfs.img file must be in the root dir of your sd card, the
rest of the files don't mattter (but they have to be in the same
directory).
Then just enable mirror mode (in settings/system/mirror) and run the
haret_uart.exe you just copied. There just press run, and linux will
boot. If you get your screen fading to white, just reset and try
again.

Be aware that this erases your pda's RAM, so all your
settings/programs will get lost if you don't backup first.

Greetz,
JeDi
--
_______________________________________________
Aximx50-port mailing list
[email protected]
https://www.handhelds.org/mailman/listinfo/aximx50-port

Reply via email to