hi,
i have installed your files but my lsusb doesnt find any device..
here is the dmesg output:
usb 2-2: new full speed USB device using uhci_hcd and address 3
usb 2-2: device descriptor read/64, error -71
usb 2-2: device descriptor read/64, error -71
is there any kernel module i have to install before?
i have already successfully installed usb-networks for my zaurus and an
palm t3 (with linux on it)
patrick
Jean-Nicolas GRAUx wrote:
Hi all,
Ok, logon using telnet over usb is now possible !
I built the following files :
- haret.exe
- zimage(done using latest kernel head & Pierre's latest patches)
- initrd.gz(re-use of initrd done by jeDi for x50v)
- x51v-rootfs.img (re-use of rootfs done by jeDi for x50v)
It can be downloaded here :
http://jn.graux.free.fr/x51v-linux/
You just have to put them into the root of your sd card.
Then, boot linux and wait for one or two minute & unplug/plug axim from
cradle.
if all is OK, lsusb should return :
"Bus XXX Device YYY: ID 049f:505a Compaq Computer Corp. SA-11x0 based
Linux Device, or Itsy (experimental)
"
After boot time, target ip is set to 10.0.0.2.
So just do "ifconfig usb0 10.0.0.1 ; telnet 10.0.0.2" on your desktop.
Restriction :
As i do no have the patch for frame buffer & touch screen, display is
not functional.
--
_______________________________________________
Aximx50-port mailing list
[email protected]
https://www.handhelds.org/mailman/listinfo/aximx50-port