Hi,
 Firstly many thanks for all your work :)

However, some problems :(

Using Jean-Nicolas test from:
http://jn.graux.free.fr/x51v-linux/x51v-linux.tar.gz

I get problems with an X51v (ROM A02, Hardware A01):

1) if mirror mode is enabled, I get "fade to white", 
  if mirror mode not enabled I get the coloured lines  (blue red cyan yellow 
black)

2) in either case, when I remove and replace the Axim
lsusb shows 
"Compaq Computer Corp. SA-11x0 based Linux Device, or Itsy"

when I try to connect via ssh
(ifconfig usb0 10.0.0.1 ; ssh [EMAIL PROTECTED])
I get a time-out, and dmesg shows
"NETDEV WATCHDOG: usb0: transmit timed out"

3) I also have an X50v (WM2005, ROM A02, hardware A01)

Using exactly the same SD card as used on the X51V (i.e. it's the same X51V 
release) HaRET on the X50v gives me a white screen, but no "Compaq Computer 
Corp. SA-11x0 based Linux Device, or Itsy" seen using lsusb on the host.

I've ordered the bits to make up a serial cable, so will help if I can in any 
way.

ta ta

Jake
-- 
_______________________________________________
Aximx50-port mailing list
[email protected]
https://www.handhelds.org/mailman/listinfo/aximx50-port

Reply via email to