rfc821:ERROR:452 Mailbox full
English version, http://www.depot.umontreal.ca/messages/x0002en.htm
Ce message n'a pu être acheminé au
destinataire suivant : Forget Georges
en raison des difficultés liées à son courrier
électronique à l'Université de Montréal.
Votre message lui sera AUTOMATIQUEMENT acheminé dès.
que son courrier sera à nouveau fonctionnel.
Veuillez S.V.P. NE PAS lui retransmettre votre message.
En cas d'urgence, utiliser un autre moyen pour
rejoindre votre destinataire.
rfc821:ERROR:452 Mailbox full
_____________________________
Send Aximx50-port mailing list submissions to
[email protected]
To subscribe or unsubscribe via the World Wide Web, visit
https://www.handhelds.org/mailman/listinfo/aximx50-port
or, via email, send a message with subject or body 'help' to
[EMAIL PROTECTED]
You can reach the person managing the list at
[EMAIL PROTECTED]
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Aximx50-port digest..."
Today's Topics:
1. Re: Aximx50-port Digest, Vol 20, Issue 24
([EMAIL PROTECTED])
2. Re: aximx50 touchscreen (Patrick Steiner)
----------------------------------------------------------------------
Message: 1
Date: Sun, 25 Feb 2007 11:35:33 -0500 (EST)
From: [EMAIL PROTECTED]
Subject: [Aximx50-port] Re: Aximx50-port Digest, Vol 20, Issue 24
To: [email protected]
Message-ID:
<[EMAIL PROTECTED]>
Content-Type: text/plain; charset=iso-8859-1
rfc821:ERROR:452 Mailbox full
English version, http://www.depot.umontreal.ca/messages/x0002en.htm
Ce message n'a pu être acheminé au
destinataire suivant : Forget Georges
en raison des difficultés liées à son courrier
électronique à l'Université de Montréal.
Votre message lui sera AUTOMATIQUEMENT acheminé dès.
que son courrier sera à nouveau fonctionnel.
Veuillez S.V.P. NE PAS lui retransmettre votre message.
En cas d'urgence, utiliser un autre moyen pour
rejoindre votre destinataire.
rfc821:ERROR:452 Mailbox full
_____________________________
Send Aximx50-port mailing list submissions to
[email protected]
To subscribe or unsubscribe via the World Wide Web, visit
https://www.handhelds.org/mailman/listinfo/aximx50-port
or, via email, send a message with subject or body 'help' to
[EMAIL PROTECTED]
You can reach the person managing the list at
[EMAIL PROTECTED]
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Aximx50-port digest..."
Today's Topics:
1. MMC/SD support broken in kernel 2.6.20 (Pierre GAUFILLET)
2. Re: OE/Angstrom build (Pierre GAUFILLET)
3. Re: OE/Angstrom build (Patrick Steiner)
4. aximx50 touchscreen (Patrick Steiner)
5. Re: aximx50 touchscreen (Pierre GAUFILLET)
6. Re: aximx50 touchscreen (Patrick Steiner)
7. Re: OE/Angstrom build (Pierre GAUFILLET)
8. Re: aximx50 touchscreen (Pierre GAUFILLET)
9. Re: aximx50 touchscreen (Patrick Steiner)
10. Re: aximx50 touchscreen (Pierre GAUFILLET)
----------------------------------------------------------------------
Message: 1
Date: Sat, 24 Feb 2007 23:20:21 +0100
From: Pierre GAUFILLET <[EMAIL PROTECTED]>
Subject: [Aximx50-port] MMC/SD support broken in kernel 2.6.20
To: [email protected]
Message-ID: <[EMAIL PROTECTED]>
Content-Type: text/plain; charset=UTF-8
Hi all,
please note that MMC/SD card support is broken in kernel 2.6.20 for some
configurations (Axim X51v + my SD card for example :-( ).
See http://www.uwsg.iu.edu/hypermail/linux/kernel/0702.1/2175.html for
more information.
Pierre
------------------------------
Message: 2
Date: Sun, 25 Feb 2007 13:46:43 +0100
From: Pierre GAUFILLET <[EMAIL PROTECTED]>
Subject: Re: [Aximx50-port] OE/Angstrom build
To: The porting effort for the Dell Axim x50
<[email protected]>
Message-ID: <[EMAIL PROTECTED]>
Content-Type: text/plain; charset=UTF-8
Well, after something like 51 attempts (arg !), I finally succeeded in
building angstrom-gpe-image with linux 2.6.19-hh12...
I created an Angstrom rootfs on a SD card, but I am not able to boot it.
And of course no message at all but the kernel boot. Not even a
"/sbin/init not found".
As I use the same kernel with Debian, I think it is a kernel
configuration pb, and I verified root=<foo> and fstab.
More : qemu can not execute Angstrom programs.
I verified the binary endianess with objdump, but it seems ok.
Does someone has an idea about that ?
Pierre
Patrick Steiner a écrit :
> On Thursday, 22. February 2007 18:39:25 Pierre GAUFILLET wrote:
>> Hi all,
>>
>> Patrick, could you please post your latest OE/Angstrom configuration for
>> Axim X50 ?
>> I am probably missing something, but I do not succeed in building a
>> distro with the one you sent a few weeks ago...
>>
>> If you could add a short description of the process to follow, or point
>> to it in the Wiki, it would be nice.
>>
>>
>>
>> Pierre
>
> Hi,
>
> my current angstrom.conf is attached but it into you OE dir
> conf/distro/angstrom-2007.1.conf
>
> after that follow this howto:
>
> http://www.angstrom-distribution.org/building-angstrom
>
> good luck!
>
------------------------------
Message: 3
Date: Sun, 25 Feb 2007 16:10:51 +0100
From: Patrick Steiner <[EMAIL PROTECTED]>
Subject: Re: [Aximx50-port] OE/Angstrom build
To: The porting effort for the Dell Axim x50
<[email protected]>
Message-ID: <[EMAIL PROTECTED]>
Content-Type: text/plain; charset="utf-8"
hi,
i have booted the angstrom bootstrap images in 2 different ways now.
1: initramfs
build a cpio.gz image (IMAGE_FSTYPES = "cpio.gz" in you local.conf)
but the zImage + angstrom.cpio.gz + haret.exe + default.txt onto you sd card
(vfat formated). and boot it. default.txt should look like this:
set GAFR(34) 1
set GAFR(35) 1
set GAFR(37) 1
set GAFR(39) 2
set GAFR(40) 2
set GAFR(41) 2
set GPDR(34) 0
set GPDR(35) 0
set GPDR(37) 0
set GPLR(34) 1
set GPLR(35) 1
set GPLR(37) 1
set GPLR(39) 1
set com "1"
set kernel "zImage-2.6.20-hh1+cvs20070224-aximx50-20070224164343"
set initrd "Angstrom-bootstrap-image-test-20070224-aximx50.rootfs.cpio.gz"
set mtype "740"
set cmdline "root=/dev/ram0 rw
ip=10.0.0.2:10.0.0.1:10.0.0.1:255.255.255.0:axim:usb0:none
console=ttyS0,115200n8 console=tty0 ramdisk_size=32768 rdinit=/sbin/init
psplash=false"
boot
2: rootfs-on-sd
this method also works with a gpe image, the other method doesn't boot gpe for
me.
more infos are available here:
http://userpage.fu-berlin.de/~zabel/magician/README
and the default.txt is available here:
http://userpage.fu-berlin.de/~zabel/magician/default.txt
replace boot2 with boot
the angstrom gpe images boots only via the ext2-on-sd method for me.
i´ll try to build a nice working gpe image (incl. touchscreen support) and
post it on my webspace...
On Sunday, 25. February 2007 13:46:43 Pierre GAUFILLET wrote:
> Well, after something like 51 attempts (arg !), I finally succeeded in
> building angstrom-gpe-image with linux 2.6.19-hh12...
>
> I created an Angstrom rootfs on a SD card, but I am not able to boot it.
> And of course no message at all but the kernel boot. Not even a
> "/sbin/init not found".
> As I use the same kernel with Debian, I think it is a kernel
> configuration pb, and I verified root=<foo> and fstab.
> More : qemu can not execute Angstrom programs.
> I verified the binary endianess with objdump, but it seems ok.
>
> Does someone has an idea about that ?
>
> Pierre
>
> Patrick Steiner a écrit :
> > On Thursday, 22. February 2007 18:39:25 Pierre GAUFILLET wrote:
> >> Hi all,
> >>
> >> Patrick, could you please post your latest OE/Angstrom configuration for
> >> Axim X50 ?
> >> I am probably missing something, but I do not succeed in building a
> >> distro with the one you sent a few weeks ago...
> >>
> >> If you could add a short description of the process to follow, or point
> >> to it in the Wiki, it would be nice.
> >>
> >>
> >>
> >> Pierre
> >
> > Hi,
> >
> > my current angstrom.conf is attached but it into you OE dir
> > conf/distro/angstrom-2007.1.conf
> >
> > after that follow this howto:
> >
> > http://www.angstrom-distribution.org/building-angstrom
> >
> > good luck!
--
Patrick Steiner | [EMAIL PROTECTED]
ICQ: 128261350
WWW: http://helmsdeep.homelinux.net/~pat
working on (tux4u.skynet):
Fedora Core release 6 (Zod)
GNU/Linux 2.6.19-1.2895.fc6
------------------------------
Message: 4
Date: Sun, 25 Feb 2007 16:36:29 +0100
From: Patrick Steiner <[EMAIL PROTECTED]>
Subject: [Aximx50-port] aximx50 touchscreen
To: The porting effort for the Dell Axim x50
<[email protected]>
Message-ID: <[EMAIL PROTECTED]>
Content-Type: text/plain; charset="us-ascii"
hi,
i currently try to get the touchscreen working with my angstrom image.
could someone describe my how i can set this up?
modprobe aximx50_ts works, but lsmod says it is used my 0
anything else todo?
patrick
--
Patrick Steiner | [EMAIL PROTECTED]
ICQ: 128261350
WWW: http://helmsdeep.homelinux.net/~pat
working on (tux4u.skynet):
Fedora Core release 6 (Zod)
GNU/Linux 2.6.19-1.2895.fc6
------------------------------
Message: 5
Date: Sun, 25 Feb 2007 16:48:26 +0100
From: Pierre GAUFILLET <[EMAIL PROTECTED]>
Subject: Re: [Aximx50-port] aximx50 touchscreen
To: The porting effort for the Dell Axim x50
<[email protected]>
Message-ID: <[EMAIL PROTECTED]>
Content-Type: text/plain; charset=UTF-8
Patrick Steiner a écrit :
> hi,
>
> i currently try to get the touchscreen working with my angstrom image.
>
> could someone describe my how i can set this up?
>
> modprobe aximx50_ts works, but lsmod says it is used my 0
>
> anything else todo?
No, I think it is ok.
On the other hand, I did not verify the behavior of aximx50_ts with
.freq = 100000
It may be required to replace it by .freq = 1850000 in aximx50_ts.c,
but I think that's all.
Now, a simple way to verify it is working is to verify the debug output
of the kernel, or to enable printk line 167 in
drivers/input/touchscreen/ts-adc-debounce.c :
} else {
printk("%04d %04d\n", (int)ts_pos.xd, (int)ts_pos.yd);
report_touchpanel(ts, ts_pos.xd, ts_pos.yd, 1);
Pierre
>
> patrick
------------------------------
Message: 6
Date: Sun, 25 Feb 2007 17:12:32 +0100
From: Patrick Steiner <[EMAIL PROTECTED]>
Subject: Re: [Aximx50-port] aximx50 touchscreen
To: The porting effort for the Dell Axim x50
<[email protected]>
Message-ID: <[EMAIL PROTECTED]>
Content-Type: text/plain; charset="utf-8"
On Sunday, 25. February 2007 16:48:26 Pierre GAUFILLET wrote:
> Patrick Steiner a écrit :
> > hi,
> >
> > i currently try to get the touchscreen working with my angstrom image.
> >
> > could someone describe my how i can set this up?
> >
> > modprobe aximx50_ts works, but lsmod says it is used my 0
> >
> > anything else todo?
>
> No, I think it is ok.
>
> On the other hand, I did not verify the behavior of aximx50_ts with
> .freq = 100000
>
> It may be required to replace it by .freq = 1850000 in aximx50_ts.c,
> but I think that's all.
>
> Now, a simple way to verify it is working is to verify the debug output
> of the kernel, or to enable printk line 167 in
> drivers/input/touchscreen/ts-adc-debounce.c :
>
> } else {
> printk("%04d %04d\n", (int)ts_pos.xd, (int)ts_pos.yd);
> report_touchpanel(ts, ts_pos.xd, ts_pos.yd, 1);
>
>
>
> Pierre
>
> > patrick
Ok i saw that you build a new patch. i haved applied this. but it doesnt apply
do the latest hh-kernel HEAD version, perhaps you could build a new patch...
after that i can try it again.
regards,
patrick
--
Patrick Steiner | [EMAIL PROTECTED]
ICQ: 128261350
WWW: http://helmsdeep.homelinux.net/~pat
working on (tux4u.skynet):
Fedora Core release 6 (Zod)
GNU/Linux 2.6.19-1.2895.fc6
------------------------------
Message: 7
Date: Sun, 25 Feb 2007 17:14:20 +0100
From: Pierre GAUFILLET <[EMAIL PROTECTED]>
Subject: Re: [Aximx50-port] OE/Angstrom build
To: The porting effort for the Dell Axim x50
<[email protected]>
Message-ID: <[EMAIL PROTECTED]>
Content-Type: text/plain; charset=UTF-8
Great ! It is booting now from a SD card, to the touchscreen calibration.
Thanks for your help, Patrick :-)
I have to enable a ttyS0 terminal, and I'll have a look to aximx50_ts.
Pierre
Patrick Steiner a écrit :
> hi,
>
> i have booted the angstrom bootstrap images in 2 different ways now.
>
> 1: initramfs
>
> build a cpio.gz image (IMAGE_FSTYPES = "cpio.gz" in you local.conf)
> but the zImage + angstrom.cpio.gz + haret.exe + default.txt onto you sd card
> (vfat formated). and boot it. default.txt should look like this:
>
> set GAFR(34) 1
> set GAFR(35) 1
> set GAFR(37) 1
> set GAFR(39) 2
> set GAFR(40) 2
> set GAFR(41) 2
> set GPDR(34) 0
> set GPDR(35) 0
> set GPDR(37) 0
> set GPLR(34) 1
> set GPLR(35) 1
> set GPLR(37) 1
> set GPLR(39) 1
>
> set com "1"
> set kernel "zImage-2.6.20-hh1+cvs20070224-aximx50-20070224164343"
> set initrd "Angstrom-bootstrap-image-test-20070224-aximx50.rootfs.cpio.gz"
> set mtype "740"
> set cmdline "root=/dev/ram0 rw
> ip=10.0.0.2:10.0.0.1:10.0.0.1:255.255.255.0:axim:usb0:none
> console=ttyS0,115200n8 console=tty0 ramdisk_size=32768 rdinit=/sbin/init
> psplash=false"
> boot
>
>
> 2: rootfs-on-sd
>
> this method also works with a gpe image, the other method doesn't boot gpe
> for
> me.
>
> more infos are available here:
> http://userpage.fu-berlin.de/~zabel/magician/README
>
> and the default.txt is available here:
> http://userpage.fu-berlin.de/~zabel/magician/default.txt
>
> replace boot2 with boot
>
>
>
> the angstrom gpe images boots only via the ext2-on-sd method for me.
>
> i´ll try to build a nice working gpe image (incl. touchscreen support) and
> post it on my webspace...
>
------------------------------
Message: 8
Date: Sun, 25 Feb 2007 17:21:54 +0100
From: Pierre GAUFILLET <[EMAIL PROTECTED]>
Subject: Re: [Aximx50-port] aximx50 touchscreen
To: The porting effort for the Dell Axim x50
<[email protected]>
Message-ID: <[EMAIL PROTECTED]>
Content-Type: text/plain; charset=UTF-8
Patrick Steiner a écrit :
> On Sunday, 25. February 2007 16:48:26 Pierre GAUFILLET wrote:
>> Patrick Steiner a écrit :
>>> hi,
>>>
>>> i currently try to get the touchscreen working with my angstrom image.
>>>
>>> could someone describe my how i can set this up?
>>>
>>> modprobe aximx50_ts works, but lsmod says it is used my 0
>>>
>>> anything else todo?
>> No, I think it is ok.
>>
>> On the other hand, I did not verify the behavior of aximx50_ts with
>> .freq = 100000
>>
>> It may be required to replace it by .freq = 1850000 in aximx50_ts.c,
>> but I think that's all.
>>
>> Now, a simple way to verify it is working is to verify the debug output
>> of the kernel, or to enable printk line 167 in
>> drivers/input/touchscreen/ts-adc-debounce.c :
>>
>> } else {
>> printk("%04d %04d\n", (int)ts_pos.xd, (int)ts_pos.yd);
>> report_touchpanel(ts, ts_pos.xd, ts_pos.yd, 1);
>>
>>
>>
>> Pierre
>>
>>> patrick
>
> Ok i saw that you build a new patch. i haved applied this. but it doesnt
> apply
> do the latest hh-kernel HEAD version, perhaps you could build a new patch...
I did not build any new patch since 2.6.20-hh1. This kernel is up to
date regarding aximx50 touchscreen driver (but it does not mean that it
is working either...).
>
> after that i can try it again.
>
> regards,
> patrick
>
------------------------------
Message: 9
Date: Sun, 25 Feb 2007 17:26:32 +0100
From: Patrick Steiner <[EMAIL PROTECTED]>
Subject: Re: [Aximx50-port] aximx50 touchscreen
To: The porting effort for the Dell Axim x50
<[email protected]>
Message-ID: <[EMAIL PROTECTED]>
Content-Type: text/plain; charset="utf-8"
On Sunday, 25. February 2007 17:21:54 Pierre GAUFILLET wrote:
> Patrick Steiner a écrit :
> > On Sunday, 25. February 2007 16:48:26 Pierre GAUFILLET wrote:
> >> Patrick Steiner a écrit :
> >>> hi,
> >>>
> >>> i currently try to get the touchscreen working with my angstrom image.
> >>>
> >>> could someone describe my how i can set this up?
> >>>
> >>> modprobe aximx50_ts works, but lsmod says it is used my 0
> >>>
> >>> anything else todo?
> >>
> >> No, I think it is ok.
> >>
> >> On the other hand, I did not verify the behavior of aximx50_ts with
> >> .freq = 100000
> >>
> >> It may be required to replace it by .freq = 1850000 in aximx50_ts.c,
> >> but I think that's all.
> >>
> >> Now, a simple way to verify it is working is to verify the debug output
> >> of the kernel, or to enable printk line 167 in
> >> drivers/input/touchscreen/ts-adc-debounce.c :
> >>
> >> } else {
> >> printk("%04d %04d\n", (int)ts_pos.xd, (int)ts_pos.yd);
> >> report_touchpanel(ts, ts_pos.xd, ts_pos.yd, 1);
> >>
> >>
> >>
> >> Pierre
> >>
> >>> patrick
> >
> > Ok i saw that you build a new patch. i haved applied this. but it doesnt
> > apply do the latest hh-kernel HEAD version, perhaps you could build a new
> > patch...
>
> I did not build any new patch since 2.6.20-hh1. This kernel is up to
> date regarding aximx50 touchscreen driver (but it does not mean that it
> is working either...).
ok could you please tell me if your ts works.
>
> > after that i can try it again.
> >
> > regards,
> > patrick
--
Patrick Steiner | [EMAIL PROTECTED]
ICQ: 128261350
WWW: http://helmsdeep.homelinux.net/~pat
working on (tux4u.skynet):
Fedora Core release 6 (Zod)
GNU/Linux 2.6.19-1.2895.fc6
------------------------------
Message: 10
Date: Sun, 25 Feb 2007 17:34:41 +0100
From: Pierre GAUFILLET <[EMAIL PROTECTED]>
Subject: Re: [Aximx50-port] aximx50 touchscreen
To: The porting effort for the Dell Axim x50
<[email protected]>
Message-ID: <[EMAIL PROTECTED]>
Content-Type: text/plain; charset=UTF-8
Patrick Steiner a écrit :
> On Sunday, 25. February 2007 17:21:54 Pierre GAUFILLET wrote:
>> Patrick Steiner a écrit :
>>> On Sunday, 25. February 2007 16:48:26 Pierre GAUFILLET wrote:
>>>> Patrick Steiner a écrit :
>>>>> hi,
>>>>>
>>>>> i currently try to get the touchscreen working with my angstrom image.
>>>>>
>>>>> could someone describe my how i can set this up?
>>>>>
>>>>> modprobe aximx50_ts works, but lsmod says it is used my 0
>>>>>
>>>>> anything else todo?
>>>> No, I think it is ok.
>>>>
>>>> On the other hand, I did not verify the behavior of aximx50_ts with
>>>> .freq = 100000
>>>>
>>>> It may be required to replace it by .freq = 1850000 in aximx50_ts.c,
>>>> but I think that's all.
>>>>
>>>> Now, a simple way to verify it is working is to verify the debug output
>>>> of the kernel, or to enable printk line 167 in
>>>> drivers/input/touchscreen/ts-adc-debounce.c :
>>>>
>>>> } else {
>>>> printk("%04d %04d\n", (int)ts_pos.xd, (int)ts_pos.yd);
>>>> report_touchpanel(ts, ts_pos.xd, ts_pos.yd, 1);
>>>>
>>>>
>>>>
>>>> Pierre
>>>>
>>>>> patrick
>>> Ok i saw that you build a new patch. i haved applied this. but it doesnt
>>> apply do the latest hh-kernel HEAD version, perhaps you could build a new
>>> patch...
>> I did not build any new patch since 2.6.20-hh1. This kernel is up to
>> date regarding aximx50 touchscreen driver (but it does not mean that it
>> is working either...).
>
> ok could you please tell me if your ts works.
of course, I'll keep you informed ;-)
BTW, can you tell me where embedded modules are defined ?
Only a subset is available in rootfs.
Finally, the 2.6.20 MMC/SD driver is broken with all my SD cards... :-(
>>> after that i can try it again.
>>>
>>> regards,
>>> patrick
>
>
>
------------------------------
--
_______________________________________________
Aximx50-port mailing list
[email protected]
https://www.handhelds.org/mailman/listinfo/aximx50-port
End of Aximx50-port Digest, Vol 20, Issue 24
********************************************
------------------------------
Message: 2
Date: Sun, 25 Feb 2007 17:39:46 +0100
From: Patrick Steiner <[EMAIL PROTECTED]>
Subject: Re: [Aximx50-port] aximx50 touchscreen
To: The porting effort for the Dell Axim x50
<[email protected]>
Message-ID: <[EMAIL PROTECTED]>
Content-Type: text/plain; charset="utf-8"
On Sunday, 25. February 2007 17:34:41 Pierre GAUFILLET wrote:
> Patrick Steiner a écrit :
> > On Sunday, 25. February 2007 17:21:54 Pierre GAUFILLET wrote:
> >> Patrick Steiner a écrit :
> >>> On Sunday, 25. February 2007 16:48:26 Pierre GAUFILLET wrote:
> >>>> Patrick Steiner a écrit :
> >>>>> hi,
> >>>>>
> >>>>> i currently try to get the touchscreen working with my angstrom
> >>>>> image.
> >>>>>
> >>>>> could someone describe my how i can set this up?
> >>>>>
> >>>>> modprobe aximx50_ts works, but lsmod says it is used my 0
> >>>>>
> >>>>> anything else todo?
> >>>>
> >>>> No, I think it is ok.
> >>>>
> >>>> On the other hand, I did not verify the behavior of aximx50_ts with
> >>>> .freq = 100000
> >>>>
> >>>> It may be required to replace it by .freq = 1850000 in aximx50_ts.c,
> >>>> but I think that's all.
> >>>>
> >>>> Now, a simple way to verify it is working is to verify the debug
> >>>> output of the kernel, or to enable printk line 167 in
> >>>> drivers/input/touchscreen/ts-adc-debounce.c :
> >>>>
> >>>> } else {
> >>>> printk("%04d %04d\n", (int)ts_pos.xd, (int)ts_pos.yd);
> >>>> report_touchpanel(ts, ts_pos.xd, ts_pos.yd, 1);
> >>>>
> >>>>
> >>>>
> >>>> Pierre
> >>>>
> >>>>> patrick
> >>>
> >>> Ok i saw that you build a new patch. i haved applied this. but it
> >>> doesnt apply do the latest hh-kernel HEAD version, perhaps you could
> >>> build a new patch...
> >>
> >> I did not build any new patch since 2.6.20-hh1. This kernel is up to
> >> date regarding aximx50 touchscreen driver (but it does not mean that it
> >> is working either...).
> >
> > ok could you please tell me if your ts works.
>
> of course, I'll keep you informed ;-)
>
> BTW, can you tell me where embedded modules are defined ?
> Only a subset is available in rootfs.
>
> Finally, the 2.6.20 MMC/SD driver is broken with all my SD cards... :-(
hmm strange my kingston 128mb card works fine.
you can autoload modules via you machine config file (aximx50.conf) the ipkg
files are located at: tmp/deploy/glibc/ipk/aximx50
btw. if you reboot your axim via linux you get a secret menu after automatic
restart ;-)
>
> >>> after that i can try it again.
> >>>
> >>> regards,
> >>> patrick
--
Patrick Steiner | [EMAIL PROTECTED]
ICQ: 128261350
WWW: http://helmsdeep.homelinux.net/~pat
working on (tux4u.skynet):
Fedora Core release 6 (Zod)
GNU/Linux 2.6.19-1.2895.fc6
------------------------------
--
_______________________________________________
Aximx50-port mailing list
[email protected]
https://www.handhelds.org/mailman/listinfo/aximx50-port
End of Aximx50-port Digest, Vol 20, Issue 25
********************************************
--
_______________________________________________
Aximx50-port mailing list
[email protected]
https://www.handhelds.org/mailman/listinfo/aximx50-port
