On Sunday, 25. February 2007 21:24:34 Pierre GAUFILLET wrote: > Patrick Steiner a écrit : > > i have also build a new image now but ts_calibrate doesnt work for me :-( > > > > > > ts_calibrate > > xres = 480, yres = 640 > > selected device is not a touchscreen I understand > > Took 1 samples... > > Top left : X = 0 Y = 0 > > Took 1 samples... > > Top right : X = 0 Y = 0 > > Took 1 samples... > > Bot right : X = 0 Y = 0 > > Took 1 samples... > > Bot left : X = 0 Y = 0 > > Took 1 samples... > > Center : X = 0 Y = 0 > > ts_calibrate: determinant is too small -- 0.000000 > > Calibration failed. > > > > any ideas whats wrong? > > Did you verify to which /dev/input/event<x> the touchscreen is linked ? > Attached is my config file (kernel 2.6.20-hh1). You should compare this > one and yours. > > > but ts_test outputs something if i push the screen. > > ok, so aximx50_ts and ts_adc_debounce at least are loaded. > Are your sure to have loaded ads7846_adc_ssp ? > > Pierre
hi pierre, touchsceen now works but is unusable, i can calibrate the screen but if i touch the screen after that there is also a very big offset of about 2cm. touchscreen0 is linked to event0 there is also a event1 an a ts0 device in /dev/input/ any ideas how i can fix the problem? patrick -- Patrick Steiner | [EMAIL PROTECTED] ICQ: 128261350 WWW: http://helmsdeep.homelinux.net/~pat working on (tux4u.skynet): Fedora Core release 6 (Zod) GNU/Linux 2.6.19-1.2895.fc6 -- _______________________________________________ Aximx50-port mailing list [email protected] https://www.handhelds.org/mailman/listinfo/aximx50-port
