I am trying to get 2 axis2_http_servers, both version 1.6.0 and running on
different win2k8 boxes, to converse exclusively over ssl as nicely as they
do over http. Unfortunately nothing happens... any help on how to figure
out what I've done wrong would be great apreciated!!
When I point a browser to one the services, using https, the request never
completes. All I see in the logs are messages like this:
[Wed Feb 03 16:35:49 2010] [error]
..\..\src\core\transport\http\common\http_request_line.c(117) Invalid status
line or invalid request line
[Wed Feb 03 16:35:49 2010] [error]
..\..\src\core\transport\http\common\simple_http_svr_conn.c(161) Invalid
status line or invalid request line
[Wed Feb 03 16:35:49 2010] [error]
..\..\src\core\transport\http\receiver\http_svr_thread.c(260) Could not
create request
No matter what value I set for the ssl port, the only port netstat shows
being open is 9090. That's even when I have both http and https defined in
the axis2.xml - can http and https use the same port?
I just tried the same tests with a build of today's trunk, and get the same
results - so I must be doing something wrong. I am building with openssl
set in build\win32\configure.in, and have also tried using libcurl with no
impact. At the moment I am trying to eliminate possible culprits and so not
building with libcurl.
TIA for any advice!
Steve
My Axis2.xml:
<axisconfig name="Axis2/C">
<!-- Enable REST -->
<parameter name="enableREST" locked="false">false</parameter>
<transportReceiver name="https" class="axis2_http_receiver">
<parameter name="port" locked="false">6443</parameter>
<parameter name="exposeHeaders" locked="true">false</parameter>
</transportReceiver>
<!-- Uncomment the following with appropriate parameters to enable the
SSL transport sender.
Also make sure that the appropriate transport receiver is enabled
above.-->
<transportSender name="https" class="axis2_http_sender">
<parameter name="PROTOCOL" locked="false">HTTP/1.1</parameter>
<parameter name="xml-declaration" insert="true"/>
</transportSender>
<parameter name="SERVER_CERT">server.cer</parameter>
<parameter name="KEY_FILE">client.pem</parameter>
<phaseOrder type="inflow">
<!-- System pre defined phases -->
<phase name="Transport"/>
<phase name="PreDispatch"/>
<phase name="Dispatch"/>
<phase name="PostDispatch"/>
</phaseOrder>
<phaseOrder type="outflow">
<phase name="MessageOut"/>
</phaseOrder>
<phaseOrder type="INfaultflow">
<!-- User defined phases could be added here -->
</phaseOrder>
<phaseOrder type="Outfaultflow">
<phase name="MessageOut"/>
</phaseOrder>
</axisconfig>
