Hello. Effectively, if I remove the SOAP 1.2 binding, my WSDL is validated... I also will look later at what de WS-I says about attachments...
Just for information, I've made by WSDL using the Axis2 MTOM sample as a model, and this is where the SOAP 1.2 binding comes from ! Thanks for your clear and detailed answer. Regards. -- Ephemeris Lappis > -----Message d'origine----- > De : Anne Thomas Manes [mailto:[EMAIL PROTECTED] > Envoyé : vendredi 20 avril 2007 15:24 > À : [email protected] > Objet : Re: [Axis2] WSDL and WS-I compliance. > > WS-I Basic Profile v1.1 (the current version) does not allow use of > SOAP 1.2, MTOM, or WS-Addressing. Support for MTOM and WS-Addressing > will be added in WS-I BP v1.2. Support for SOAP 1.2 will be added in > WS-I BP v2.0. > > For the moment, use of any of these newer specifications is likely to > cause interoperability challenges, therefore the WS-I profiles still > recommend that you stick with the basics. > > If you want to be WS-I BP v1.1 compliant, you must constrain your > service to SOAP 1.1 and WSDL 1.1. If you want to use attachments, you > can follow the WS-I Attachments Profile, which provides guidance for > using SOAP with Attachments (although you will encounter interop > problems with this.) > > Anne > > On 4/20/07, Ephemeris Lappis <[EMAIL PROTECTED]> wrote: > > > > > > > > > > Hello. > > > > > > > > My WSDL seems good enough for server and client generation in Axis2 and > > .net. Nevertheless when validating it with my Eclipse, 2 problems are > > reported : > > > > > > > > WS-I: (AP2901) A description uses neither the WSDL MIME Binding as > described > > in WSDL 1.1 Section 5 nor WSDL SOAP binding as described in WSDL 1.1 > Section > > 3 on each of the wsdl:input or wsdl:output elements of a wsdl:binding. > > > > > > > > WS-I: (BP2402) The wsdl:binding element does not use a soapbind:binding > > element as defined in section "3 SOAP Binding." of the WSDL 1.1 > > specification. > > > > > > > > The message are refered for the second SOAP 1.2 binding : > > > > > > > > <wsdl:binding > > > > name="Moon4Service-SOAP12-Binding" > > > > type="my-service:Moon4Service"> > > > > <soap12:binding > > > > > > transport="http://schemas.xmlsoap.org/soap/http"; > > > > style="document" /> > > > > <wsdl:operation name="testAttachment"> > > > > <soap12:operation > > > > > > soapAction="urn:moon-ws-4/service/test-attachment" > > > > style="document" /> > > > > <wsdl:input name="TestAttachmentInput"> > > > > <soap12:body use="literal" /> > > > > </wsdl:input> > > > > <wsdl:output name="TestAttachmentOutput"> > > > > <soap12:body use="literal" /> > > > > </wsdl:output> > > > > </wsdl:operation> > > > > </wsdl:binding> > > > > > > > > I have had a look at the WS-I documents, but even with their comments, I > > don't understand what my eclipse is complaining about. > > > > > > > > So, if some WSDL fluent speaker should help me > > > > > > > > Thanks > > > > > > > > > > -- > > > > Ephemeris Lappis > > > > > > > > > > --------------------------------------------------------------------- > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
