I still cannot get all the portTypes generated even with Axis 1.2. Any
plans on fixing this ?
*Bo Xie <[EMAIL PROTECTED]>* wrote:
Sorry to bother you again. Just want to know if this is a bug or I did not
set the parameter correctly. Any advice on how to make this work.
Thanks,
-Bo
On 5/20/07, Bo Xie <[EMAIL PROTECTED]> wrote:
>
> I attached the wsdls from the original email.
>
> Thanks,
> -Bo
>
> On 5/20/07, Amila Suriarachchi < [EMAIL PROTECTED] > wrote:
> >
> > Can you send your wsdl? do you have ports for each bining?
> > Actually code is generated per port.
> >
> > On 5/20/07, Bo Xie < [EMAIL PROTECTED]> wrote:
> > >
> > > Hi,
> > >
> > > Just wondering if this is still an issue in Axis2 1.2 or I did not
> > > put the parameters properly.
> > >
> > > Thanks,
> > > -Bo
> > > On 5/17/07, Bo Xie < [EMAIL PROTECTED]> wrote:
> > > >
> > > > Thanks, Amila. I tried your advice using no -pn and -sn. It still
> > > > only generated last one binding out of the 4. I used asix2 1.2release.
> > > >
> > > > Here is the command line. Anything I did not do right? Attached is
> > > > the output files and wsdl files. Sorry for the 500k size.
> > > >
> > > > C:\programs\work>wsdl2java -o output -p com.xyz.nbi -t -ss -sd -g
> > > > -S src -R src -uri wsrp_service.wsdl
> > > > Using AXIS2_HOME: C:\programs\axis2-1.2
> > > > Using JAVA_HOME: C:\programs\jdk1.5.0_09
> > > > Retrieving document at 'wsrp_v1_bindings.wsdl', relative to
> > > > 'file:/C:/programs/work/'.
> > > > Retrieving document at 'wsrp_v1_interfaces.wsdl', relative to
> > > > 'file:/C:/programs/work/wsrp_v1_bindings.wsdl'.
> > > > Retrieving schema at 'wsrp_v1_types.xsd', relative to
> > > > 'file:/C:/programs/work/wsrp_v1_interfaces.wsdl'.
> > > > Retrieving schema at 'http://www.w3.org/2001/xml.xsd', relative to
> > > > 'file:/C:/programs/work/wsrp_v1_types.xsd'.
> > > > Retrieving document at 'wsrp_v1_bindings.wsdl', relative to
> > > > 'file:/C:/programs/work/'.
> > > > Retrieving document at 'wsrp_v1_interfaces.wsdl', relative to
> > > > 'file:/C:/programs/work/wsrp_v1_bindings.wsdl'.
> > > > Retrieving schema at 'wsrp_v1_types.xsd', relative to
> > > > 'file:/C:/programs/work/wsrp_v1_interfaces.wsdl'.
> > > > Retrieving schema at 'http://www.w3.org/2001/xml.xsd', relative to
> > > > 'file:/C:/programs/work/wsrp_v1_types.xsd'.
> > > > May 17, 2007 11:55:31 AM
> > > > org.apache.axis2.wsdl.codegen.writer.ClassWriter createOutFile
> > > > INFO: The output\src\com\xyz\nbi\InvalidHandleException.java file
> > > > cannot be overwritten.
> > > > May 17, 2007 11:55:31 AM
> > > > org.apache.axis2.wsdl.codegen.writer.ClassWriter createOutFile
> > > > INFO: The output\src\com\xyz\nbi\AccessDeniedException.java file
> > > > cannot be overwritten.
> > > > May 17, 2007 11:55:31 AM
> > > > org.apache.axis2.wsdl.codegen.writer.ClassWriter createOutFile
> > > > INFO: The output\src\com\xyz\nbi\InvalidRegistrationException.java
> > > > file cannot be overwritten.
> > > > May 17, 2007 11:55:31 AM
> > > > org.apache.axis2.wsdl.codegen.writer.ClassWriter createOutFile
> > > > INFO: The output\src\com\xyz\nbi\MissingParametersException.java
> > > > file cannot be overwritten.
> > > > May 17, 2007 11:55:31 AM
> > > > org.apache.axis2.wsdl.codegen.writer.ClassWriter createOutFile
> > > > INFO: The output\src\com\xyz\nbi\InvalidUserCategoryException.java
> > > > file cannot be overwritten.
> > > > May 17, 2007 11:55:31 AM
> > > > org.apache.axis2.wsdl.codegen.writer.ClassWriter createOutFile
> > > > INFO: The output\src\com\xyz\nbi\OperationFailedException.java
> > > > file cannot be overwritten.
> > > > May 17, 2007 11:55:31 AM
> > > > org.apache.axis2.wsdl.codegen.writer.ClassWriter createOutFile
> > > > INFO: The
> > > > output\src\com\xyz\nbi\InconsistentParametersException.java file cannot
be
> > > > overwritten.
> > > >
> > > > Thanks,
> > > > -Bo
> > > > On 5/17/07, Amila Suriarachchi <[EMAIL PROTECTED]>
> > > > wrote:
> > > > >
> > > > >
> > > > >
> > > > > On 5/17/07, Bo Xie <[EMAIL PROTECTED] > wrote:
> > > > > >
> > > > > > Hi
> > > > > >
> > > > > > I tried on Axis2 1.2 release package. I see there is an -pn
> > > > > > operation. Here is the command line I used. The skeleton file still
only
> > > > > > have the operations in the last port(see attached skeleton file).
> > > > > >
> > > > > > My questions are:
> > > > > > 1. Is "-pn WSRPRegistrationService" used correctly, why the
> > > > > > skeleton file does not have the operations from this portType.
> > > > >
> > > > >
> > > > > pn is for port name not for port type.
> > > > >
> > > > > 2. Is there any options to have wsdl2java generate all the
> > > > > > portTypes in the WSDL.
> > > > > >
> > > > > > C:\programs\work>wsdl2java -o output -p com.cisco.csm.nbi -t
> > > > > > -ss -sd -g -S src -R src -pn WSRPRegistrationService -uri
wsrp_service.wsdl
> > > > >
> > > > >
> > > > > if you do not use the -pn and -sn parameters it will generatethe code
for all bindings.
> > > > >
> > > > > Using AXIS2_HOME: C:\programs\axis2- 1.2
> > > > > > Using JAVA_HOME: C:\programs\jdk1.5.0_09
> > > > > > Retrieving document at 'wsrp_v1_bindings.wsdl', relative to
> > > > > > 'file:/C:/programs/work/'.
> > > > > > Retrieving document at 'wsrp_v1_interfaces.wsdl', relative to
> > > > > > 'file:/C:/programs/work/wsrp_v1_bindings.wsdl'.
> > > > > > Retrieving schema at 'wsrp_v1_types.xsd', relative to
> > > > > > 'file:/C:/programs/work/wsrp_v1_interfaces.wsdl'.
> > > > > > Retrieving schema at ' http://www.w3.org/2001/xml.xsd ',
> > > > > > relative to 'file:/C:/programs/work/wsrp_v1_types.xsd'.
> > > > > > Retrieving document at 'wsrp_v1_bindings.wsdl', relative to
> > > > > > 'file:/C:/programs/work/'.
> > > > > > Retrieving document at 'wsrp_v1_interfaces.wsdl', relative to
> > > > > > 'file:/C:/programs/work/wsrp_v1_bindings.wsdl'.
> > > > > > Retrieving schema at 'wsrp_v1_types.xsd', relative to
> > > > > > 'file:/C:/programs/work/wsrp_v1_interfaces.wsdl'.
> > > > > > Retrieving schema at ' http://www.w3.org/2001/xml.xsd ',
> > > > > > relative to 'file:/C:/programs/work/wsrp_v1_types.xsd'.
> > > > > > May 16, 2007 6:05:12 PM
> > > > > > org.apache.axis2.wsdl.codegen.writer.ClassWriter createOutFile
> > > > > > INFO: The
> > > > > > output\src\com\cisco\csm\nbi\InvalidHandleException.java file
cannot be
> > > > > > overwritten.
> > > > > > May 16, 2007 6:05:12 PM
> > > > > > org.apache.axis2.wsdl.codegen.writer.ClassWriter createOutFile
> > > > > > INFO: The
> > > > > > output\src\com\cisco\csm\nbi\AccessDeniedException.java file cannot
be
> > > > > > overwritten.
> > > > > > May 16, 2007 6:05:12 PM
> > > > > > org.apache.axis2.wsdl.codegen.writer.ClassWriter createOutFile
> > > > > > INFO: The
> > > > > > output\src\com\cisco\csm\nbi\InvalidRegistrationException.java file
cannot
> > > > > > be overwritten.
> > > > > > May 16, 2007 6:05:12 PM
> > > > > > org.apache.axis2.wsdl.codegen.writer.ClassWriter createOutFile
> > > > > > INFO: The
> > > > > > output\src\com\cisco\csm\nbi\MissingParametersException.java file
cannot be
> > > > > > overwritten.
> > > > > > May 16, 2007 6:05:12 PM
> > > > > > org.apache.axis2.wsdl.codegen.writer.ClassWriter createOutFile
> > > > > > INFO: The
> > > > > > output\src\com\cisco\csm\nbi\InvalidUserCategoryException.java file
cannot
> > > > > > be overwritten.
> > > > > > May 16, 2007 6:05:12 PM
> > > > > > org.apache.axis2.wsdl.codegen.writer.ClassWriter createOutFile
> > > > > > INFO: The
> > > > > > output\src\com\cisco\csm\nbi\OperationFailedException.java file
cannot be
> > > > > > overwritten.
> > > > > > May 16, 2007 6:05:12 PM
> > > > > > org.apache.axis2.wsdl.codegen.writer.ClassWriter createOutFile
> > > > > > INFO: The
> > > > > > output\src\com\cisco\csm\nbi\InconsistentParametersException.java
file
> > > > > > cannot be overwritten.
> > > > > >
> > > > > > Thanks,
> > > > > > -Bo
> > > > > >
> > > > > > On 3/14/07, Amila Suriarachchi <[EMAIL PROTECTED]>
> > > > > > wrote:
> > > > > > >
> > > > > > > I recently added multi services support to axis2. can you
> > > > > > > have a look with a nighly build?
> > > > > > >
> > > > > > > On 3/7/07, Amila Suriarachchi < [EMAIL PROTECTED]>
> > > > > > > wrote:
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > On 3/7/07, Jess Fisher <[EMAIL PROTECTED]> wrote:
> > > > > > > > >
> > > > > > > > > I'm trying to understand what's happening here, so bear
> > > > > > > > > with me...
> > > > > > > > > Using Axis 1.4, I run the WSDL2Java like this:
> > > > > > > > > java org.apache.axis.wsdl.WSDL2Java -s -o
> > > > > > > > > C:\temp\generated_source C:\temp\wsrp_service.wsdl
> > > > > > > > >
> > > > > > > > > This created all the java interfaces for the defined
> > > > > > > > > wsdl:portType. See attached java_interfaces.zip
> > > > > > > > >
> > > > > > > > > This also automatically generated all the binding
> > > > > > > > > classes for the <wsdl:binding> defined in
wsrp_v1_bindings.wsdl (see my
> > > > > > > > > previous post where I attached this file there)
> > > > > > > > > These were all defined in wsrp_v1_bindings.wsdl:
> > > > > > > > > <wsdl:binding name="WSRP_v1_Markup_Binding_SOAP"
> > > > > > > > > type="intf:WSRP_v1_Markup_PortType">
> > > > > > > > > <wsdl:binding
> > > > > > > > > name="WSRP_v1_ServiceDescription_Binding_SOAP"
> > > > > > > > > type="intf:WSRP_v1_ServiceDescription_PortType">
> > > > > > > > > <wsdl:binding name="WSRP_v1_Registration_Binding_SOAP"
> > > > > > > > > type="intf:WSRP_v1_Registration_PortType">
> > > > > > > > > <wsdl:binding
> > > > > > > > > name="WSRP_v1_PortletManagement_Binding_SOAP"
> > > > > > > > > type="intf:WSRP_v1_PortletManagement_PortType">
> > > > > > > > >
> > > > > > > > > The way I run Axis2's wsdl2java is as follows:
> > > > > > > > > wsdl2java.bat -uri C:\temp\wsrp_service.wsdl -o
> > > > > > > > > C:\temp\generated_source -ss -d adb -g -ns2p
> > > > > > > > > urn:oasis:names:tc:wsrp:v1:types=
> > > > > > > > > oasis.names.tc.wsrp.v1.types,urn:oasis:names:tc:wsrp:v1:intf=
> > > > > > > > > oasis.names.tc.wsrp.v1.intf
> > > > > > > > > ,urn:oasis:names:tc:wsrp:v1:bind
> > > > > > > > > =oasis.names.tc.wsrp.v1.bind
> > > > > > > > > ,urn:oasis:names:tc:wsrp:v1:wsdl=
> > > > > > > > > oasis.names.tc.wsrp.v1.wsdl -ssi
> > > > > > > > > However when I used Axis2's wsdl2java I did not get the
> > > > > > > > > java interfaces for <wsdl:portType>. Why does the axis
> > > > > > > > > 1.x generate the java interfaces but axis 2 doesn't?
> > > > > > > > >
> > > > > > > >
> > > > > > > > well Axis2 generates the interface if you have specified
> > > > > > > > the -ssi parameter. But the difference is it has the service
name instead of
> > > > > > > > the porttype name. I am not familiar with the axis 1.x but
> > > > > > > > actually this interface method signatures are depends on the
binding.
> > > > > > > >
> > > > > > > > Also, I had to run wsdl2java seperately on
> > > > > > > > > wsrp_v1_bindings.wsdl before it would read my <wsdl:binding>
defined there
> > > > > > > > > to create my java classes for my wsdl bindings. Note that
wsrp_service.wsdl
> > > > > > > > > already imports wsrp_v1_bindings.wsdl. It also does not
generate the java
> > > > > > > > > classes for all my wsdl:binding (I guess due to multiple
defined
> > > > > > > > > wsdl:binding in my wsdl file). I get this message when I run
the wsdl2java
> > > > > > > > > on wsrp_v1_bindings.wsdl:
> > > > > > > > >
org.apache.axis2.description.WSDL11ToAxisServiceBuilderfindBinding
> > > > > > > > > INFO: A service element was not found - picking a random
> > > > > > > > > binding!
> > > > > > > > >
> > > > > > > >
> > > > > > > > In Axis2 it generates the code for only one binding in one
> > > > > > > > service. So if there is no service it creates a random
> > > > > > > > service.Actually this is an axis2 limitation.
> > > > > > > >
> > > > > > > > What I did to workaround this is to manually run
> > > > > > > > > wsdl2java on each of my wsdl:binding, so I can get the java
classes for all
> > > > > > > > > of my bindings. Axis 1.x wsdl2java automatically
> > > > > > > > > generated java classes for all my wsdl:binding defined in
> > > > > > > > > wsrp_v1_bindings.wsdl.
> > > > > > > > >
> > > > > > > > > Any thoughts?
> > > > > > > > >
> > > > > > > > > Thanks again!
> > > > > > > > >
> > > > > > > > > *Amila Suriarachchi <[EMAIL PROTECTED]>*wrote:
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > On 3/7/07, Jess Fisher <[EMAIL PROTECTED] > wrote:
> > > > > > > > > >
> > > > > > > > > > From the attached wsdl
> > > > > > > > > > file:wsrp_v1_interfaces.wsdl, the following are defined:
> > > > > > > > > > <wsdl:portType name="WSRP_v1_Markup_PortType">
> > > > > > > > > > <wsdl:portType
> > > > > > > > > > name="WSRP_v1_ServiceDescription_PortType">
> > > > > > > > > > <wsdl:portType name="WSRP_v1_Registration_PortType">
> > > > > > > > > > <wsdl:portType
> > > > > > > > > > name="WSRP_v1_PortletManagement_PortType">
> > > > > > > > > >
> > > > > > > > > > But, when running Axis2's WSDL2Java, the corresponding
> > > > > > > > > > java classes (for the wsdl:portType) are not created.
> > > > > > > > > > Using Axis 1.4's WSDL2Java, the corresposing java
> > > > > > > > > > classes were generated.
> > > > > > > > > >
> > > > > > > > >
> > > > > > > > > using axis2 you can not generate the code for portTypes.
> > > > > > > > > The reason for this is the skelton and and stub interfaces
depends on the
> > > > > > > > > binding. Why you need to generate the code for a port type?
> > > > > > > > >
> > > > > > > > > I run the WSDL2Java against wsrp_service.wsdl first
> > > > > > > > > > which imports wsrp_v1_bindings.wsdl which then imports
> > > > > > > > > > wsrp_v1_interfaces.wsdl.
> > > > > > > > > >
> > > > > > > > > > Is this a bug?
> > > > > > > > > >
> > > > > > > > >
> > > > > > > > > no I believe.
> > > > > > > > >
> > > > > > > > > If yes, does anybody know of the bug ID ? I cannot find
> > > > > > > > > > it in JIRA.
> > > > > > > > > > Or is there a WSDL2Java option I need to set to
> > > > > > > > > > generate java classes for the portType, specifically?
> > > > > > > > > >
> > > > > > > > >
> > > > > > > > > if you do not have specified any parts or namespace ( in
> > > > > > > > > rpc) in soap:body (in your binding) and generate the code
with parameters
> > > > > > > > > -ss -sd -ssi and with any binding (-d adb, -d jibx, -d
xmlbeans, -d jaxbri)
> > > > > > > > > I think you can get what you need. It simply generates the
skelton, skelton
> > > > > > > > > interface and the service.xml.
> > > > > > > > >
> > > > > > > > > (I've used -ss, -g, -d adb, -ssi)
> > > > > > > > > >
> > > > > > > > > > Thanks.
> > > > > > > > > >
> > > > > > > > > > ------------------------------
> > > > > > > > > > Need Mail bonding?
> > > > > > > > > > Go to the Yahoo! Mail
Q&A<http://answers.yahoo.com/dir/index;_ylc=X3oDMTFvbGNhMGE3BF9TAzM5NjU0NTEwOARfcwMzOTY1NDUxMDMEc2VjA21haWxfdGFnbGluZQRzbGsDbWFpbF90YWcx?link=ask&sid=396546091>for
great
> > > > > > > > > > tips from Yahoo!
Answers<http://answers.yahoo.com/dir/index;_ylc=X3oDMTFvbGNhMGE3BF9TAzM5NjU0NTEwOARfcwMzOTY1NDUxMDMEc2VjA21haWxfdGFnbGluZQRzbGsDbWFpbF90YWcx?link=ask&sid=396546091>users.
--0-1424838073-1173226094=:65510--
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
---------------------------------------------------------------------
> > > > > > > > > > To unsubscribe, e-mail:
> > > > > > > > > > [EMAIL PROTECTED]
> > > > > > > > > > For additional commands, e-mail: [EMAIL PROTECTED]
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > --
> > > > > > > > > Amila Suriarachchi,
> > > > > > > > > WSO2 Inc.
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > ------------------------------
> > > > > > > > > It's here! Your new message!
> > > > > > > > > Get new email
alerts<http://us.rd.yahoo.com/evt=49938/*http://tools.search.yahoo.com/toolbar/features/mail/>with the
free Yahoo!
> > > > > > > > > Toolbar. --0-1402565997-1173253433=:40062--
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
---------------------------------------------------------------------
> > > > > > > > > To unsubscribe, e-mail:
> > > > > > > > > [EMAIL PROTECTED]
> > > > > > > > > For additional commands, e-mail: [EMAIL PROTECTED]
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > --
> > > > > > > > Amila Suriarachchi,
> > > > > > > > WSO2 Inc.
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > --
> > > > > > > Amila Suriarachchi,
> > > > > > > WSO2 Inc.
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
---------------------------------------------------------------------
> > > > > > To unsubscribe, e-mail: [EMAIL PROTECTED]
> > > > > > For additional commands, e-mail: [EMAIL PROTECTED]
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > > > --
> > > > > Amila Suriarachchi,
> > > > > WSO2 Inc.
> > > >
> > > >
> > > >
> > > >
> > >
> >
> >
> > --
> > Amila Suriarachchi,
> > WSO2 Inc.
>
>
>
>
------------------------------
Be a better Globetrotter. Get better travel answers
<http://us.rd.yahoo.com/evt=48254/*http://answers.yahoo.com/dir/_ylc=X3oDMTI5MGx2aThyBF9TAzIxMTU1MDAzNTIEX3MDMzk2NTQ1MTAzBHNlYwNCQUJwaWxsYXJfTklfMzYwBHNsawNQcm9kdWN0X3F1ZXN0aW9uX3BhZ2U-?link=list&sid=396545469>from
someone who knows.
Yahoo! Answers - Check it out.
