Hi Cathal, I'm not sure whether jaxbri data binding supports MTOM.. Is the JMS use case you are talking about is a different one.. For a fact I know that there are systems like Apache Synapse which uses JMS with MTOM. But again I don't know how whether it'll couple with DataBinding..
Sorry for not being able to provide any useful feedback.. I think its better to send two mails with different subjects like "MTOM with JaxBRI??" and "MTOM with JMS". I'm sure people with experience in those areas will step in to give you some help.. thanks, Thilina On Wed, Feb 27, 2008 at 2:30 AM, callagc4 <[EMAIL PROTECTED]> wrote: > > Hi Thilina, > > Thanks for your reply. Just to give you some more details on what binding i > am using etc. I am using jaxbri data-binding. Testing has shown that when > sending a message with binary information (denoted in my wsdl as > xsd:base64Binary) via the http protocol, the message contains the correct > xop headers but the binary data is stored by value inside the soap envolope. > > > Also when sending a message via the jms protocol, which is our primary > interest, i found that after i had explicitly set the following on the > msgContext before the JMSSender creates the JMSMessage that the message is > send with the corrrect Mime boundary but the soap message again contains the > binary information by value inside the envolope. > > msgContext.setDoingMTOM(true); > options.setProperty(Constants.Configuration.ENABLE_MTOM, > Constants.VALUE_TRUE); > options.setProperty(JMSConstants.JMS_MESSAGE_TYPE, > JMSConstants.JMS_BYTE_MESSAGE); > > Can you advise on what may be the cause of this issue, and what potential > workaround could be tried. Have the data binding guys come up with any > possible causes for this given the wsdl and xsd i posted prievously? > > Thanks for your help, > Cathal > > > > > > > > Thilina Gunarathne wrote: > > > > Hi, > > > >> Is this an issue with the generator? Why does it not add the qname of my > >> binary element to the opNameArray? > > Sounds like it should work.. I'll let our data binding guys to give > > the an answer... If nothing works out, report a JIRA with your WSDL > > and if possible with a test case.. > > > >> 2) the second approach outlined in the documentation states: > >> Going a little further, you can use the xmime schema > >> (http://www.w3.org/2005/05/xmlmime) to describe the binary content more > >> precisely > > Save the "xmlmime.xsd" file locally in your system and add the > > following to your XSD.. > > > > <xsd:import namespace="http://www.w3.org/2005/05/xmlmime"; > > schemaLocation="xmlmime.xsd" /> > > > > thanks, > > Thilina > > > >> However this requires import the http://www.w3.org/2005/05/xmlmime > >> namespace > >> which fails inside our firewall with the following exception: > >> > >> Retrieving schema at 'http://www.w3.org/2005/05/xmlmime', relative to > >> > >> > 'file:/E:/Sandboxes/ProductServices-220208/src/com/fineos/frontoffice/documentproduction/DocumentProductionOperationsXSD/DocumentProductionOperations.xsd'. > >> Exception in thread "main" > >> org.apache.axis2.wsdl.codegen.CodeGenerationException: Error parsing > >> WSDL > >> at > >> > >> > org.apache.axis2.wsdl.codegen.CodeGenerationEngine.<init>(CodeGenerationEngine.java:150) > >> at org.apache.axis2.wsdl.WSDL2Code.main(WSDL2Code.java:35) > >> at org.apache.axis2.wsdl.WSDL2Java.main(WSDL2Java.java:24) > >> Caused by: javax.wsdl.WSDLException: WSDLException (at > >> /wsdl:definitions/wsdl:types/xsd:schema/xsd:schema): > >> faultCode=OTHER_ERROR: > >> An error occurred trying to resolve schema referenced at > >> 'http://www.w3.org/2005/05/xmlmime', relative to > >> > >> > 'file:/E:/Sandboxes/ProductServices-220208/src/com/fineos/frontoffice/documentproduction/DocumentProductionOperationsXSD/DocumentProductionOperations.xsd'.: > >> java.net.NoRouteToHostException: No route to host: connect > >> at com.ibm.wsdl.xml.WSDLReaderImpl.parseSchema(Unknown Source) > >> at com.ibm.wsdl.xml.WSDLReaderImpl.parseSchema(Unknown Source) > >> at com.ibm.wsdl.xml.WSDLReaderImpl.parseSchema(Unknown Source) > >> at com.ibm.wsdl.xml.WSDLReaderImpl.parseTypes(Unknown Source) > >> at com.ibm.wsdl.xml.WSDLReaderImpl.parseDefinitions(Unknown > >> Source) > >> at com.ibm.wsdl.xml.WSDLReaderImpl.readWSDL(Unknown Source) > >> at com.ibm.wsdl.xml.WSDLReaderImpl.readWSDL(Unknown Source) > >> at com.ibm.wsdl.xml.WSDLReaderImpl.readWSDL(Unknown Source) > >> at > >> > >> > org.apache.axis2.wsdl.codegen.CodeGenerationEngine.readInTheWSDLFile(CodeGenerationEngine.java:286) > >> at > >> > >> > org.apache.axis2.wsdl.codegen.CodeGenerationEngine.<init>(CodeGenerationEngine.java:105) > >> ... 2 more > >> Caused by: java.net.NoRouteToHostException: No route to host: connect > >> at java.net.PlainSocketImpl.socketConnect(Native Method) > >> at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333) > >> at > >> java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195) > >> at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182) > >> at java.net.Socket.connect(Socket.java:519) > >> at java.net.Socket.connect(Socket.java:469) > >> at sun.net.NetworkClient.doConnect(NetworkClient.java:157) > >> at sun.net.www.http.HttpClient.openServer(HttpClient.java:382) > >> at sun.net.www.http.HttpClient.openServer(HttpClient.java:509) > >> at sun.net.www.http.HttpClient.<init>(HttpClient.java:231) > >> at sun.net.www.http.HttpClient.New(HttpClient.java:304) > >> at sun.net.www.http.HttpClient.New(HttpClient.java:316) > >> at > >> > >> > sun.net.www.protocol.http.HttpURLConnection.getNewHttpClient(HttpURLConnection.java:817) > >> at > >> > >> > sun.net.www.protocol.http.HttpURLConnection.plainConnect(HttpURLConnection.java:769) > >> at > >> > >> > sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection.java:694) > >> at > >> > >> > sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:938) > >> at java.net.URL.openStream(URL.java:1007) > >> at com.ibm.wsdl.util.StringUtils.getContentAsInputStream(Unknown > >> Source) > >> ... 12 more > >> > >> > >> wsdl def: > >> <?xml version="1.0" encoding="UTF-8"?> > >> <wsdl:definitions xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"; > >> > >> > >> > xmlns:operationtypes="http://www.fineos.com/frontoffice/documentproduction/operationtypes"; > >> xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/"; > >> xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/"; > >> xmlns:http="http://schemas.xmlsoap.org/wsdl/http/"; > >> xmlns:wsaw="http://www.w3.org/2006/05/addressing/wsdl"; > >> xmlns:xsd="http://www.w3.org/2001/XMLSchema"; > >> xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"; > >> > >> > >> > targetNamespace="http://www.fineos.com/frontoffice/documentproduction/operationtypes";> > >> <wsdl:types> > >> <xsd:schema > >> > >> > targetNamespace="http://www.fineos.com/frontoffice/documentproduction/operationtypes";> > >> <xsd:include > >> > >> > schemaLocation="../../documentproduction/DocumentProductionOperationsXSD/DocumentProductionOperations.xsd"/> > >> </xsd:schema> > >> </wsdl:types> > >> <wsdl:message name="uploadFileRequest"> > >> <wsdl:part name="parameters" > >> element="operationtypes:uploadFile"/> > >> </wsdl:message> > >> <wsdl:message name="uploadFileResponse"> > >> <wsdl:part name="parameters" > >> element="operationtypes:uploadFileResponse"/> > >> </wsdl:message> > >> <wsdl:portType name="DocProdServicesPortType"> > >> <wsdl:operation name="uploadFile"> > >> <wsdl:input message="operationtypes:uploadFileRequest" > >> wsaw:Action="urn:uploadFile"/> > >> <wsdl:output message="operationtypes:uploadFileResponse" > >> wsaw:Action="urn:uploadFileResponse"/> > >> </wsdl:operation> > >> </wsdl:portType> > >> <wsdl:binding name="DocProdServicesSOAP11Binding" > >> type="operationtypes:DocProdServicesPortType"> > >> <soap:binding transport="http://schemas.xmlsoap.org/soap/http"; > >> style="document"/> > >> <wsdl:operation name="uploadFile"> > >> <soap:operation soapAction="urn:uploadFile" > >> style="document"/> > >> <wsdl:input> > >> <soap:body use="literal"/> > >> </wsdl:input> > >> <wsdl:output> > >> <soap:body use="literal"/> > >> </wsdl:output> > >> </wsdl:operation> > >> </wsdl:binding> > >> <wsdl:binding name="DocProdServicesSOAP12Binding" > >> type="operationtypes:DocProdServicesPortType"> > >> <wsdl:operation name="uploadFile"> > >> <soap12:operation soapAction="urn:uploadFile" > >> style="document"/> > >> <wsdl:input> > >> <soap12:body use="literal"/> > >> </wsdl:input> > >> <wsdl:output> > >> <soap12:body use="literal"/> > >> </wsdl:output> > >> </wsdl:operation> > >> </wsdl:binding> > >> <wsdl:binding name="DocProdServicesHttpBinding" > >> type="operationtypes:DocProdServicesPortType"> > >> <http:binding verb="POST"/> > >> <wsdl:operation name="uploadFile"> > >> <http:operation location="DocProdServices/uploadFile"/> > >> <wsdl:input> > >> <mime:content type="text/xml" part="uploadFile"/> > >> </wsdl:input> > >> <wsdl:output> > >> <mime:content type="text/xml" part="uploadFile"/> > >> </wsdl:output> > >> </wsdl:operation> > >> </wsdl:binding> > >> <wsdl:service name="DocProdServices"> > >> <wsdl:port name="DocProdServicesSOAP11port_http" > >> binding="operationtypes:DocProdServicesSOAP11Binding"> > >> <soap:address > >> location="http://localhost:8080/axis2/service/DocProdServices"/> > >> </wsdl:port> > >> <wsdl:port name="DocProdServicesSOAP12port_http" > >> binding="operationtypes:DocProdServicesSOAP12Binding"> > >> <soap12:address > >> location="http://localhost:8080/axis2/service/DocProdServices"/> > >> </wsdl:port> > >> <wsdl:port name="DocProdServicesHttpport" > >> binding="operationtypes:DocProdServicesHttpBinding"> > >> <http:address > >> location="http://localhost:8080/axis2/service/DocProdServices"/> > >> </wsdl:port> > >> </wsdl:service> > >> </wsdl:definitions> > >> > >> > >> xsd def: > >> <?xml version="1.0" encoding="UTF-8"?> > >> <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"; > >> attributeFormDefault="unqualified" > >> elementFormDefault="unqualified" > >> > >> > >> > targetNamespace="http://www.fineos.com/frontoffice/documentproduction/operationtypes";> > >> > >> <xsd:element name="uploadFile"> > >> <xsd:complexType> > >> <xsd:sequence> > >> <xsd:element minOccurs="0" name="encodedFile" > >> nillable="true" type="xsd:base64Binary" /> > >> <xsd:element minOccurs="0" name="parentDirName" > >> nillable="true" type="xsd:string" /> > >> </xsd:sequence> > >> </xsd:complexType> > >> </xsd:element> > >> <xsd:element name="uploadFileResponse"> > >> <xsd:complexType> > >> <xsd:sequence> > >> <xsd:element minOccurs="0" name="return" nillable="true" > >> type="xsd:string" /> > >> </xsd:sequence> > >> </xsd:complexType> > >> </xsd:element> > >> </xsd:schema> > >> > >> Any help you be appreciated > >> > >> Thanks, > >> Cathal > >> > >> > >> > >> > >> -- > >> View this message in context: > >> http://www.nabble.com/MTOM-defintition-in-wsdl-tp15651792p15651792.html > >> Sent from the Axis - User mailing list archive at Nabble.com. > >> > >> > >> --------------------------------------------------------------------- > >> To unsubscribe, e-mail: [EMAIL PROTECTED] > >> For additional commands, e-mail: [EMAIL PROTECTED] > >> > >> > > > > > > > > -- > > Thilina Gunarathne - http://thilinag.blogspot.com > > > > --------------------------------------------------------------------- > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > > > -- > View this message in context: > http://www.nabble.com/MTOM-defintition-in-wsdl-tp15651792p15707535.html > > > Sent from the Axis - User mailing list archive at Nabble.com. > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > -- Thilina Gunarathne - http://thilinag.blogspot.com --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
