Hi again, Please ignore my message - I [rather stupidly] forgot to put a MASQUERADE rule into my gateway batmand board. I put that in and was working!
looking good (and very easy!) so far thanks, Derek On Sun, November 16, 2008 10:31 pm, Derek C wrote: > Hi all, > > > I'm trying to try-out batman with kamikaze 8.09 on some Atheros boards > (Ubiquity litestation 2s). > > > So far almost so good. > > > I have both boards booted. I've setup the ath0 interfaces as Adhoc with > IP addresses 5.0.0.1/8 and 5.0.0.2/8 and I can ping between them. > > > batmand is started on both boards and on the Internet gateway board I've > run "batmand -c -g 4Mbit" and on the radio linked node board I've run > "batmand -c -r 3". > > > Then I see some great looking messages: > Found new gateway 5.255.0.1 -> class: 49 - 4MBit/1024KBit > Adding default route to 5.255.0.1 (gw_flags: 49, tq: 110, gw_product: 0) > Gateway client - got IP (169.254.0.1) from gateway: 5.255.0.1 > Adding default route via gate0 (table 68) > > > I see that there is indeed a "gate0" tunnel NIC created and although I > don't see a new default route if I run "ip route list table 68" I CAN see a > line "default dev gate0 proto static scope link src 169.254.0.1". > > Still - I don't much like the look of that 169.254.0.1 IP address ? > > > I am not getting actual Internet access - which is why I'm looking for > help > > > thanks for any info! > > Derek > > > > -- > Derek C > > > _______________________________________________ > B.A.T.M.A.N mailing list > b.a.t.m....@open-mesh.net > https://list.open-mesh.net/mm/listinfo/b.a.t.m.a.n > > -- Derek C
