Andrew Lunn wrote: > Signed-off-by: Andrew Lunn <[email protected]> > --- > README | 35 +++++++++-------------------------- > 1 files changed, 9 insertions(+), 26 deletions(-) > > diff --git a/README b/README > index 4c2a6c6..e2a7271 100644 > --- a/README > +++ b/README > @@ -15,19 +15,6 @@ above B.A.T.M.A.N. Advanced, prominent examples are: > IPv4, IPv6, DHCP, IPX. This is batman-advanced implemented as Linux kernel > driver. It does not depend on any network (other) driver, and can be used > on wifi as well as ethernet, vpn, etc ... (anything with ethernet-style > layer 2). > -It compiles against and should work with Linux 2.6.20 - 2.6.33. Supporting > older > -versions is not planned, but it's probably easy to backport it. If you work > on a > -backport, feel free to contact us. :-) > - > -COMPILE > -------- > -To compile against your currently installed kernel, just type: > - > -# make > - > -if you want to compile against some other kernel, use: > - > -# make KERNELPATH=/path/to/kernel
This should not be removed from maint or trunk.
> USAGE
> -----
> @@ -123,15 +110,11 @@ dmesg | grep batman-adv
>
> When investigating problems with your mesh network it is sometimes
> necessary to see more detail debug messages. This must be enabled when
> -compiling the batman-adv module. When building batman-adv as part of
> -kernel, use "make menuconfig" and enable the option
> -"B.A.T.M.A.N. debugging". When compiling outside of the kernel tree it
> -is necessary to edit the file Makefile.kbuild and uncomment the line
> -
> -#EXTRA_CFLAGS += -DCONFIG_BATMAN_ADV_DEBUG
> +compiling the batman-adv module. Use "make menuconfig" and enable the
> +option "B.A.T.M.A.N. debugging".
This should not be changed in maint or trunk.
> The additional debug output is by default disabled. It can be enabled
> -either at kernel modules load time or during run time. To enable debug
> +either at kernel module load time or during run time. To enable debug
> output at module load time, add the module parameter debug=<value>.
> <value> can take one of four values.
>
> @@ -160,12 +143,12 @@ to see the debug messages.
> BATCTL
> ------
>
> -B.A.T.M.A.N. advanced operates on layer 2 and thus all hosts partici-
> -pating in the virtual switch are completely transparent for all proto-
> -cols above layer 2. Therefore the common diagnosis tools do not work as
> -expected. To overcome these problems batctl was created. At the moment
> -the batctl contains ping, traceroute, tcpdump and interfaces to the
> -kernel module settings.
> +B.A.T.M.A.N. advanced operates on layer 2 and thus all hosts
> +participating in the virtual switch are completely transparent for all
> +protocols above layer 2. Therefore the common diagnosis tools do not
> +work as expected. To overcome these problems batctl was created. At
> +the moment the batctl contains ping, traceroute, tcpdump and
> +interfaces to the kernel module settings.
>
> For more information, please see the manpage (man batctl).
This looks fine :)
Best regards,
Sven
signature.asc
Description: This is a digitally signed message part.
