Hi, I have a special question on confgurating our batman advanced setup. We have a Tinc VPN on tap0, and behind this VPN is a dhcp server and an internet gateway which is reachable trough the ip 10.18.0.1. On the router I have ath1, an adhoc wlan device, on which batman advanced is sending packagets. Now bat0 and tap0 are brindged to br-mesh. Like you can see in the configuration:
root@Floh:~# cat /etc/config/network
[...]
config 'interface' 'mesh'
option 'type' 'bridge'
option 'ifname' 'bat0 tap0'
option 'stp' '1'
[...]
root@Floh:~# cat /etc/config/batman-adv
config 'mesh' 'bat0'
option 'interfaces' 'ath1'
option 'orig_interval'
option 'log_level'
[batman]
[client]-->[adhoc ath1]-->[bat0][br-mesh][tap0]-->internet-->[gateway/dhcp]
Other nodes running the same configuration but not connecting trought vpn can
connect to the dhcp server through batman advanced and the adhoc device.
If a client (laptop) without batman advanced tries to connect, it has no
success because it does not get an I address.
What can I do?
I can not open a second wifi device in ap mode and add it to mesh. I know that
this would be the best way but I´m trying this on an wrt54g and the b43 driver
does not support multi essid.
Regards
Clemens
signature.asc
Description: This is a digitally signed message part.
