On Thursday 26 May 2011 14:32:25 Marek Lindner wrote: > Signed-off-by: Marek Lindner <lindner_ma...@yahoo.de> > ---
Acked by: Sven Eckelmann <s...@narfation.org> > README | 41 ++++++++++++++++++++--------------------- > 1 files changed, 20 insertions(+), 21 deletions(-) > > diff --git a/README b/README > index d11c6d3..442f8b6 100644 > --- a/README > +++ b/README > @@ -18,8 +18,8 @@ settings. > How does it work ? > ================== > > -batctl uses the /dev/batman-adv device provided by the B.A.T.M.A.N. > advanced -kernel module to inject custom icmp packets into the data flow. > That's why +batctl uses the debugfs/batman_adv/bat0/socket device provided > by the B.A.T.M.A.N. +advanced kernel module to inject custom icmp packets > into the data flow. That's why ping and traceroute work almost like their > IP based counterparts. Tcpdump was designed because B.A.T.M.A.N. advanced > encapsulates all traffic within batman packets, so that the normal tcpdump > would not recognize the packets. @@ -30,8 +30,8 @@ The bat-hosts file > > This file is simliar to the /etc/hosts file. You can write one MAC address > and one host name per line. batctl will analyze the file to find the > matching MAC -address to your provided host name. Host names are much > easier to remember -than MAC addresses. ;) > +address to your provided host name. Host names are much easier to remember > than +MAC addresses. ;) > > > batctl ping > @@ -45,6 +45,7 @@ options: > -h print this help > -i interval in seconds > -t timeout in seconds > + -R record route > > Example: > > @@ -95,8 +96,9 @@ options: > 4 - batman unicast packets > 8 - batman broadcast packets > 16 - batman vis packets > - 32 - non batman packets > - 33 - batman ogm & non batman packets > + 32 - batman fragmented packets > + 64 - non batman packets > + 65 - batman ogm & non batman packets > > Example output for tcpdump: > > @@ -241,12 +243,12 @@ batctl interface > > display or modify the interface settings > > -Usage: batctl interface|if [none|interface] > +Usage: batctl interface|if [add|del iface(s)] > > Example: > > $ batctl interface > -[ active] eth0 fe:fe:00:00:01:01 > +eth0: active > > batctl interval > =============== > @@ -270,7 +272,6 @@ Usage: batctl log|l > Example: > > $ batctl log > -r) > [ 400] Received BATMAN packet via NB: fe:fe:00:00:02:01 IF: eth0 > [fe:fe:00:00:01:01] (from OG: fe:fe:00:00:01:01 via prev OG: > fe:fe:00:00:01:01 seqno 670, tq 245, TTL 49, V 8, IDF 1) [ 400] Drop > packet: originator packet from myself (via neighbour) [ 400] > Received BATMAN packet via NB: fe:fe:00:00:02:01 IF: eth0 > [fe:fe:00:00:01:01] (from OG: fe:fe:00:00:02:01 via prev OG: > fe:fe:00:00:02:01 seqno 545, tq 255, TTL 50, V 8, IDF 0) @@ -285,15 > +286,14 @@ batctl loglevel > > display or modify the log level > > -Usage: batctl |ll [level] > +Usage: batctl loglevel|ll [level] > > Example: > $ batctl loglevel > -[x] critical (0) > -[x] warnings (1) > -[x] notices (2) > -[x] batman (4) > -[x] routes (8) > +[x] all debug output disabled (0) > +[ ] messages related to routing / flooding / broadcasting (1) > +[ ] messages related to route or hna added / changed / deleted (2) > +[ ] all debug messages (3) > > batctl aggregation > ================== > @@ -334,18 +334,17 @@ Globally announced TT entries received via the mesh > (translation table): * 86:4b:b2:d2:00:00 via fe:fe:00:00:07:01 > * ca:a1:5b:e5:00:00 via fe:fe:00:00:06:01 > > -batctl vis_server > +batctl vis_mode > ================= > > display or modify the status of the VIS server > > -Usage: batctl vis_server|vs [enabled|disabled] > +Usage: batctl vis_mode|vm [mode] > > Example: > > -$ batctl vis_server > -[x] client mode (server disabled) > -[ ] server mode (server enabled) > +$ batctl vis_mode > +client > > > batctl vis_data > @@ -410,7 +409,7 @@ vis-dot to png > -------------- > > The vis dot output could then further be converted to an image of the > topology -graph, e.g. with the help of the graphviz-tools. The according > commands could +graph, e.g. with the help of the graphviz-tools. The > according commands could then look like this: > > $ batctl vis_data dot > /tmp/graph.dot
signature.asc
Description: This is a digitally signed message part.
