Hello,
I started using batman-adv's gateway mode. Sadly, I ran into some trouble - A
client is connected to two gateways via vpn (fastd):
# batctl gw_mode
client (selection class: 1)
# batctl gwl
Gateway (#/255) Nexthop [outgoingIF]: gw_class ...
[B.A.T.M.A.N. adv 2012.4.0, MainIF/MAC: wlan0-1/f6:ec:38:e9:72:35 (bat0)]
6a:4b:93:de:00:84 (255) 6a:4b:93:de:00:84 [ mesh-vpn]: 207 - 48MBit/48MBit
=> aa:31:0e:4a:0f:1d (254) aa:31:0e:4a:0f:1d [ mesh-vpn]: 39 -
1024KBit/1024KBit
# batctl o
[B.A.T.M.A.N. adv 2012.4.0, MainIF/MAC: wlan0-1/f6:ec:38:e9:72:35 (bat0)]
Originator last-seen (#/255) Nexthop [outgoingIF]: Potential
nexthops ...
aa:31:0e:4a:0f:1d 0.500s (255) aa:31:0e:4a:0f:1d [ mesh-vpn]:
aa:31:0e:4a:0f:1d (255)
6a:4b:93:de:00:84 0.940s (255) 6a:4b:93:de:00:84 [ mesh-vpn]:
6a:4b:93:de:00:84 (255)
The client should use 6a:4b:93:de:00:84 as a gatway, since it provides much
higher data rates - however, it is stuck at aa:31:0e:4a:0f:1d.
Why is that? How can I make the client choosing 6a:4b:93:de:00:84?
Thanks in advance,
Keep smiling
yanosz
