From: Antonio Quartulli <[email protected]>
This protocol can be used to change VLAN-specific settings
of a batman-adv soft-interface.
At the moment only ap_isolation is available, but new ones
can be easily added as soon as batman-adv get to support more.
Interface configuration example:
config interface 'bat0vlan1'
option protocol 'batadv_vlan'
option ifname 'bat0.1'
option ap_isolation '1'
Cc: Bastian Bittorf <[email protected]>
Signed-off-by: Antonio Quartulli <[email protected]>
---
**this patch has been tested only with the stable package in openwrt-routing**
batman-adv-devel/Makefile | 1 +
.../files/lib/netifd/proto/batadv_vlan.sh | 29 ++++++++++++++++++++++
2 files changed, 30 insertions(+)
create mode 100644 batman-adv-devel/files/lib/netifd/proto/batadv_vlan.sh
diff --git a/batman-adv-devel/Makefile b/batman-adv-devel/Makefile
index e8b0881..76f5861 100644
--- a/batman-adv-devel/Makefile
+++ b/batman-adv-devel/Makefile
@@ -78,6 +78,7 @@ define KernelPackage/batman-adv-devel/install
$(INSTALL_DATA) ./files/lib/batman-adv/config.sh $(1)/lib/batman-adv
$(INSTALL_BIN) ./files/etc/hotplug.d/net/99-batman-adv
$(1)/etc/hotplug.d/net
$(INSTALL_BIN) ./files/lib/netifd/proto/batadv.sh $(1)/lib/netifd/proto
+ $(INSTALL_BIN) ./files/lib/netifd/proto/batadv_vlan.sh
$(1)/lib/netifd/proto
endef
$(eval $(call KernelPackage,batman-adv-devel))
diff --git a/batman-adv-devel/files/lib/netifd/proto/batadv_vlan.sh
b/batman-adv-devel/files/lib/netifd/proto/batadv_vlan.sh
new file mode 100644
index 0000000..85002c3
--- /dev/null
+++ b/batman-adv-devel/files/lib/netifd/proto/batadv_vlan.sh
@@ -0,0 +1,29 @@
+#!/bin/sh
+
+. /lib/functions.sh
+. ../netifd-proto.sh
+init_proto "$@"
+
+proto_batadv_vlan_init_config() {
+ proto_config_add_string "ap_isolation"
+}
+
+proto_batadv_vlan_setup() {
+ local config="$1"
+ local iface="$2"
+
+ # VLAN specific variables
+ local device="${iface%.*}"
+ local vid="${iface#*.}"
+
+ # batadv_vlan options
+ local ap_isolation
+
+ json_get_vars ap_isolation
+
+ echo "$ap_isolation" >
"/sys/class/net/${device}/mesh/vlan${vid}/ap_isolation"
+ proto_init_update "$iface" 1
+ proto_send_update "$config"
+}
+
+add_protocol batadv_vlan
--
1.8.5.5
