Il 29/09/2015 01:24, Simon Wunderlich ha scritto:
> batadv-vis is also a daemon which must run in background to collect
> data from batman-adv and push it (periodically) into alfred. Maybe you
> are not running it but only used the client part to query? Cheers, Simon 
Yeah that was the problem, thank you very much!
I attach again the whole and fixed procedure I followed, hoping that it
can be useful to other people. At the end of the e-mail you can find
also the jsondoc output I got.

1) Install a Fedora VirtualBox virtual machine;
2) In the virtual machine VirtualBox settings, set the network interface
in bridge mode;
3) Clone two times the virtual machine, enabling the "re-initialise MAC
addresses" option;
4) Start them and then run the following commands on each of them:

    Maybe not required, but to avoid all possible problems, I also
disabled the firewall
    # systemctl disable firewalld; systemctl stop firewalld
   
    # dnf -y install batctl
    then download and install alfred from git source code (certain
guides show alfredadv-vis , I instead got batadv-vis)

    # ip link set dev enp0s3 mtu 1532
    # batctl if add enp0s3
    # ip link set bat0 up
    # alfred -i enp0s3 -m

    Then I opened a new console (tty2)
    # cat /etc/hostname | alfred -s 65
    # batadv-vis -s

    Then I opened a new console (tty3)
    # cat /etc/hostname | alfred -s 65
    # alfred -r 65  (note: this one will show the info sent from the
three nodes only if you entered the previous command on all the VMs)
    # batadv-vis --format=jsondoc


And here we go!







{
  "source_version" : "2015.1-2-g4384c2b",
  "algorithm" : 4,
  "vis" : [
    { "primary" : "08:00:27:8f:b1:c2",
      "neighbors" : [
         { "router" : "08:00:27:8f:b1:c2",
           "neighbor" : "08:00:27:a9:8d:af",
           "metric" : "1.000" },
         { "router" : "08:00:27:8f:b1:c2",
           "neighbor" : "08:00:27:83:e5:59",
           "metric" : "1.000" }
      ],
      "clients" : [
        "33:33:00:00:00:01",
        "33:33:ff:f4:13:fb",
        "d6:ba:c2:f4:13:fb",
        "01:00:5e:00:00:01"
      ]
    },
    { "primary" : "08:00:27:83:e5:59",
      "neighbors" : [
         { "router" : "08:00:27:83:e5:59",
           "neighbor" : "08:00:27:a9:8d:af",
           "metric" : "1.000" },
         { "router" : "08:00:27:83:e5:59",
           "neighbor" : "08:00:27:8f:b1:c2",
           "metric" : "1.016" }
      ],
      "clients" : [
        "1a:7c:e9:74:cc:47",
        "33:33:00:00:00:01",
        "33:33:ff:74:cc:47",
        "01:00:5e:00:00:01"
      ]
    },
    { "primary" : "08:00:27:a9:8d:af",
      "neighbors" : [
         { "router" : "08:00:27:a9:8d:af",
           "neighbor" : "08:00:27:8f:b1:c2",
           "metric" : "1.000" },
         { "router" : "08:00:27:a9:8d:af",
           "neighbor" : "08:00:27:83:e5:59",
           "metric" : "1.004" }
      ],
      "clients" : [
        "4e:ae:15:0e:ba:a2",
        "33:33:00:00:00:01",
        "01:00:5e:00:00:01",
        "33:33:ff:0e:ba:a2"
      ]
    }
  ]
}



Reply via email to