Hi,
I'm trying to do a mesh network using the RaspberryPi and Batman.
My problem is I'm using 2 wifi card on one raspberrypi one for batman and the
other one for connecting to my wireless access point.
I already made my mesh network I can ping on layer 2 or 3 between 2
raspberrypi. When connecting the Ethernet cable(on the raspberry with 2 wifi
dongle) I can use the bridge to ping toward the internet. But when I disconnect
the cable I can't ping internet anymore.
I already verified my batman interface and my bridge both seem to work
The AP is connected on wlan1, wlan1 doesn't have an IP address assigned to it.
The AP is configured with WPA2. When trying to assign a address using dhclient
to the bridge interface the system can't seem to find a way and the command is
waiting.
If I want to connected my batman network to a standard wifi AP do I need to use
a bridge or the functionality exist with batman?
If it's with the bridge how can it work?
I'm putting the output of a few command at the end of the email. If you want
anything else It will be my pleasure to send it.
André Pouliot
-----
root@raspberrypi:/home/pi# ifconfig
bat0 Link encap:Ethernet HWaddr 72:4c:12:42:f2:d4
inet6 addr: fe80::704c:12ff:fe42:f2d4/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:354 errors:0 dropped:0 overruns:0 frame:0
TX packets:5857 errors:0 dropped:791 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:19536 (19.0 KiB) TX bytes:821562 (802.3 KiB)
eth0 Link encap:Ethernet HWaddr b8:27:eb:06:21:f3
inet addr:172.17.94.48 Bcast:172.17.95.255 Mask:255.255.240.0
inet6 addr: fe80::ba27:ebff:fe06:21f3/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:9628 errors:0 dropped:5 overruns:0 frame:0
TX packets:3273 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1054143 (1.0 MiB) TX bytes:380009 (371.1 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:216 errors:0 dropped:0 overruns:0 frame:0
TX packets:216 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:22172 (21.6 KiB) TX bytes:22172 (21.6 KiB)
mesh-bridge Link encap:Ethernet HWaddr 00:0f:60:04:03:a6
inet addr:172.17.94.29 Bcast:172.17.95.255 Mask:255.255.240.0
inet6 addr: fe80::20f:60ff:fe04:3a6/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:9123 errors:0 dropped:0 overruns:0 frame:0
TX packets:2856 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:963896 (941.3 KiB) TX bytes:316106 (308.6 KiB)
wlan0 Link encap:Ethernet HWaddr 40:a5:ef:01:23:c8
inet6 addr: fe80::42a5:efff:fe01:23c8/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1532 Metric:1
RX packets:22070 errors:0 dropped:0 overruns:0 frame:0
TX packets:29900 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:2408956 (2.2 MiB) TX bytes:4165384 (3.9 MiB)
wlan1 Link encap:Ethernet HWaddr 00:0f:60:04:03:a6
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:2195 errors:0 dropped:1 overruns:0 frame:0
TX packets:11 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:276922 (270.4 KiB) TX bytes:3110 (3.0 KiB)
root@raspberrypi:/home/pi# brctl show
bridge name bridge id STP enabled interfaces
mesh-bridge 8000.000f600403a6 no bat0
eth0
wlan1
root@raspberrypi:/home/pi# batctl o
[B.A.T.M.A.N. adv 2015.0, MainIF/MAC: wlan0/40:a5:ef:01:23:c8 (bat0 BATMAN_IV)]
Originator last-seen (#/255) Nexthop [outgoingIF]: Potential
nexthops ...
40:a5:ef:01:2f:58 0.010s (255) 40:a5:ef:01:2f:58 [ wlan0]:
40:a5:ef:01:2f:58 (255)
root@raspberrypi:/home/pi# iw dev wlan1 link
Connected to 00:24:01:65:e4:6d (on wlan1)
SSID: C2T3-Prod
freq: 2437
RX: 16265 bytes (149 packets)
TX: 180 bytes (3 packets)
signal: -43 dBm
tx bitrate: 6.5 MBit/s MCS 0
bss flags: short-preamble short-slot-time
dtim period: 1
beacon int: 100
