Consider the following situation which has been found in a test setup:
Gateway B has claimed client C and gateway A has the same backbone
network as B. C sends a broad- or multicast to B and directly after
this packet decides to send another packet to A due to a better TQ
value. B will forward the broad-/multicast into the backbone as it is
the responsible gw and after that A will claim C as it has been
chosen by C as the best gateway. If it now happens that A claims C
before it has received the broad-/multicast forwarded by B (due to
backbone topology or due to some delay in B when forwarding the
packet) we get a critical situation: in the current code A will
immediately unclaim C when receiving the multicast due to the
roaming client scenario although the position of C has not changed
in the mesh. If this happens the multi-/broadcast forwarded by B
will be sent back into the mesh by A and we have looping packets
until one of the gateways claims C again.
In order to prevent this, unclaiming of a client due to the roaming
client scenario is only done after a certain time is expired after
the last claim of the client. 100 ms are used here, which should be
slow enough for big backbones and slow gateways but fast enough not
to break the roaming client use case.

Acked-by: Simon Wunderlich <s...@simonwunderlich.de>
Signed-off-by: Andreas Pape <ap...@phoenixcontact.com>
---
 net/batman-adv/bridge_loop_avoidance.c |   20 ++++++++++++++++----
 1 files changed, 16 insertions(+), 4 deletions(-)

diff --git a/net/batman-adv/bridge_loop_avoidance.c 
b/net/batman-adv/bridge_loop_avoidance.c
index c426327..0790cbc 100644
--- a/net/batman-adv/bridge_loop_avoidance.c
+++ b/net/batman-adv/bridge_loop_avoidance.c
@@ -1904,10 +1904,22 @@ bool batadv_bla_tx(struct batadv_priv *bat_priv, struct 
sk_buff *skb,
                /* if yes, the client has roamed and we have
                 * to unclaim it.
                 */
-               batadv_handle_unclaim(bat_priv, primary_if,
-                                     primary_if->net_dev->dev_addr,
-                                     ethhdr->h_source, vid);
-               goto allow;
+               if (batadv_has_timed_out(claim->lasttime, 100)) {
+                       /* only unclaim if the last claim entry is
+                        * older than 100 ms to make sure we really
+                        * have a roaming client here.
+                        */
+                       batadv_dbg(BATADV_DBG_BLA, bat_priv, "bla_tx(): Roaming 
client %pM detected. Unclaim it.\n",
+                                  ethhdr->h_source);
+                       batadv_handle_unclaim(bat_priv, primary_if,
+                                             primary_if->net_dev->dev_addr,
+                                             ethhdr->h_source, vid);
+                       goto allow;
+               } else {
+                       batadv_dbg(BATADV_DBG_BLA, bat_priv, "bla_tx(): Race 
for claim %pM detected. Drop packet.\n",
+                                  ethhdr->h_source);
+                       goto handled;
+               }
        }

        /* check if it is a multicast/broadcast frame */
--
1.7.0.4



..................................................................
PHOENIX CONTACT ELECTRONICS GmbH

Sitz der Gesellschaft / registered office of the company: 31812 Bad Pyrmont
USt-Id-Nr.: DE811742156
Amtsgericht Hannover HRB 100528 / district court Hannover HRB 100528
Geschäftsführer / Executive Board: Roland Bent, Dr. Martin Heubeck
___________________________________________________________________
Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte Informationen. 
Wenn Sie nicht der richtige Adressat sind oder diese E-Mail irrtümlich erhalten 
haben, informieren Sie bitte sofort den Absender und vernichten Sie diese Mail. 
Das unerlaubte Kopieren, jegliche anderweitige Verwendung sowie die unbefugte 
Weitergabe dieser Mail ist nicht gestattet.
----------------------------------------------------------------------------------------------------
This e-mail may contain confidential and/or privileged information. If you are 
not the intended recipient (or have received this e-mail in error) please 
notify the sender immediately and destroy this e-mail. Any unauthorized 
copying, disclosure, distribution or other use of the material or parts thereof 
is strictly forbidden.
___________________________________________________________________

Reply via email to