On Mon, Sep 27, 2010 at 11:29 PM, h2o-post <[email protected]> wrote: > Hi all, > > > > In our Freifunk mesh network we run several broadcom devices in adhoc > modewith olsr routing. > > To move to b43 we did some testing with current OpenWrt trunk and b43. > > One crutial observation we made: We were not able to find the knob to change > the multicast rate in b43. > > Since this is an essential tuning parameter in our current mesh and > essential for proper olsr routing. > > To be more precise, olsr probing traffic is send out as mulicast traffic, > therefore we use a multicast rate > > e.g. of 6MBit/sec … so in densed mesh you got only routes with the multicast > rate as lower limit. > > Is there any secret I missed to change the multicast rate in b43 ? > > If this is not implemented so far, what would be a sketch to help here > implementing ?
Read the documentation for rate_control_send_low() : http://tinyurl.com/rate-controlhttp://tinyurl.com/rate-control-send-low-send-low Luis _______________________________________________ b43-dev mailing list [email protected] http://lists.infradead.org/mailman/listinfo/b43-dev
