W dniu 2 marca 2011 04:30 użytkownik [email protected] <[email protected]> napisał: > 2011/3/2 [email protected] <[email protected]> >> >> As one of the people why reported some of these issues, I am going to take >> it upon my self to >> test the current b43 firmware with an ASUS WL500pv2. This uses the Broadcom >> 5354 SoC and > has a LP-PHY with Both the stable(4.150.10.5) and >> experimental (4.178.10.4) firmware. > > OK. I managed that faster that I expected > I tested the latest (fresh checkout) of OpenWrt backfire 10.03 > I can confirm that when using the broadcom 5354 SoC (LP-PHY) that the > experimental (4.178.10.4) firmware. causes "oom" errors. > I repeated tests with both stable and experimental with the same > configuration and the > experimental version always caused "oom" > > happy to test anything else as needed. I currently have the stable > version under a load test > > The following is the first "iteration" of the log - as up can see the > firmware is loaded. > The radio interface is added to the bridge and moved to the > forwarding state, then POW. > > b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23) > b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23)
Did you brought interface up, then down, then again up? I try to check if there is reason for loading firmware twice. Did you get the same messages with old (stable) firmware? -- Rafał _______________________________________________ b43-dev mailing list [email protected] http://lists.infradead.org/mailman/listinfo/b43-dev
