2011/3/9 [email protected] <[email protected]> > 2011/3/9 Rafał Miłecki <[email protected]> > > W dniu 8 marca 2011 02:25 użytkownik [email protected] <[email protected]> >> napisał: >> > >> > 2011/3/8 Rafał Miłecki <[email protected]> >> >> >> >> W dniu 4 marca 2011 01:37 użytkownik [email protected] <[email protected]> >> >> napisał: >> >> > Maybe the way to investigate this further is to look at what is being >> >> > passed between >> >> > mac80211 and b43, with the different firmwares. >> >> > >> >> > I will add some debugging on the weekend and see what I can uncover. >> >> >> >> Maybe it'd make sense to check what we get from hardware with older >> >> vs. newer firmware? >> >> >> >> Attached patch was compile-tested only. >> >> >> >> It may put a lot of messages in your dmesg, don't try to run it for too >> >> long ;) >> >> >> > > I the just tested the patch > Very curious.. I get nothing. > > I double checked that the patch was applied. > I cleaned the object files, to ensure that it was compiled > I ensured that CONFIG_B43_DEBUG was enabled > > But the lines are never called >
I also tried both experimental and stable, with the same result ---------------------------------------------------------- Chris Martin m: +61 419 812 371 ----------------------------------------------------------
_______________________________________________ b43-dev mailing list [email protected] http://lists.infradead.org/mailman/listinfo/b43-dev
