We must not init it like clientmode one, it would break device (tested
by Hauke on BCM4718). Add stub hostmode driver for now.

Signed-off-by: Rafał Miłecki <[email protected]>
---
Hauke: will you add your Signed-off-by?

In comparison to your patch for seriee, I have:
1) Disabled MIPS check for now (commented in code)
2) Enabled mode check even for driver without hostmode enabled
---
 drivers/bcma/Kconfig           |    6 ++++++
 drivers/bcma/Makefile          |    1 +
 drivers/bcma/bcma_private.h    |    4 ++++
 drivers/bcma/driver_pci.c      |   38 +++++++++++++++++++++++++++++++++++++-
 drivers/bcma/driver_pci_host.c |   14 ++++++++++++++
 5 files changed, 62 insertions(+), 1 deletions(-)
 create mode 100644 drivers/bcma/driver_pci_host.c

diff --git a/drivers/bcma/Kconfig b/drivers/bcma/Kconfig
index 83e9adf..ae0a02e 100644
--- a/drivers/bcma/Kconfig
+++ b/drivers/bcma/Kconfig
@@ -27,6 +27,12 @@ config BCMA_HOST_PCI
        bool "Support for BCMA on PCI-host bus"
        depends on BCMA_HOST_PCI_POSSIBLE
 
+config BCMA_DRIVER_PCI_HOSTMODE
+       bool "Driver for PCI core working in hostmode"
+       depends on BCMA && MIPS
+       help
+         PCI core hostmode operation (external PCI bus).
+
 config BCMA_DEBUG
        bool "BCMA debugging"
        depends on BCMA
diff --git a/drivers/bcma/Makefile b/drivers/bcma/Makefile
index cde0182..a2161cc 100644
--- a/drivers/bcma/Makefile
+++ b/drivers/bcma/Makefile
@@ -1,6 +1,7 @@
 bcma-y                                 += main.o scan.o core.o sprom.o
 bcma-y                                 += driver_chipcommon.o 
driver_chipcommon_pmu.o
 bcma-y                                 += driver_pci.o
+bcma-$(CONFIG_BCMA_DRIVER_PCI_HOSTMODE)        += driver_pci_host.o
 bcma-$(CONFIG_BCMA_HOST_PCI)           += host_pci.o
 obj-$(CONFIG_BCMA)                     += bcma.o
 
diff --git a/drivers/bcma/bcma_private.h b/drivers/bcma/bcma_private.h
index 4228736..e02ff21 100644
--- a/drivers/bcma/bcma_private.h
+++ b/drivers/bcma/bcma_private.h
@@ -28,4 +28,8 @@ extern int __init bcma_host_pci_init(void);
 extern void __exit bcma_host_pci_exit(void);
 #endif /* CONFIG_BCMA_HOST_PCI */
 
+#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE
+void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc);
+#endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */
+
 #endif
diff --git a/drivers/bcma/driver_pci.c b/drivers/bcma/driver_pci.c
index b0c19ed..dc6f34a 100644
--- a/drivers/bcma/driver_pci.c
+++ b/drivers/bcma/driver_pci.c
@@ -157,11 +157,47 @@ static void bcma_pcicore_serdes_workaround(struct 
bcma_drv_pci *pc)
  * Init.
  **************************************************/
 
-void bcma_core_pci_init(struct bcma_drv_pci *pc)
+static void bcma_core_pci_clientmode_init(struct bcma_drv_pci *pc)
 {
        bcma_pcicore_serdes_workaround(pc);
 }
 
+static bool bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc)
+{
+       struct bcma_bus *bus = pc->core->bus;
+       u16 chipid_top;
+
+       chipid_top = (bus->chipinfo.id & 0xFF00);
+       if (chipid_top != 0x4700 &&
+           chipid_top != 0x5300)
+               return false;
+
+       if (bus->sprom.boardflags_lo & SSB_PCICORE_BFL_NOPCI)
+               return false;
+
+#if 0
+       /* TODO: on BCMA we use address from EROM instead of magic formula */
+       u32 tmp;
+       return !mips_busprobe32(tmp, (bus->mmio +
+               (pc->core->core_index * BCMA_CORE_SIZE)));
+#endif
+
+       return true;
+}
+
+void bcma_core_pci_init(struct bcma_drv_pci *pc)
+{
+       if (bcma_core_pci_is_in_hostmode(pc)) {
+#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE
+               bcma_core_pci_hostmode_init(pc);
+#else
+               pr_err("Driver compiled without support for hostmode PCI\n");
+#endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */
+       } else {
+               bcma_core_pci_clientmode_init(pc);
+       }
+}
+
 int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core,
                          bool enable)
 {
diff --git a/drivers/bcma/driver_pci_host.c b/drivers/bcma/driver_pci_host.c
new file mode 100644
index 0000000..eb332b7
--- /dev/null
+++ b/drivers/bcma/driver_pci_host.c
@@ -0,0 +1,14 @@
+/*
+ * Broadcom specific AMBA
+ * PCI Core in hostmode
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "bcma_private.h"
+#include <linux/bcma/bcma.h>
+
+void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc)
+{
+       pr_err("No support for PCI core in hostmode yet\n");
+}
-- 
1.7.3.4


_______________________________________________
b43-dev mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/b43-dev

Reply via email to