Add lists of chipsets, so people can enable support for their device easier (at least after checking lspci).
Signed-off-by: Rafał Miłecki <[email protected]> --- drivers/net/wireless/b43/Kconfig | 22 +++++++++------------- 1 file changed, 9 insertions(+), 13 deletions(-) diff --git a/drivers/net/wireless/b43/Kconfig b/drivers/net/wireless/b43/Kconfig index d4c6ae3..64a5b67 100644 --- a/drivers/net/wireless/b43/Kconfig +++ b/drivers/net/wireless/b43/Kconfig @@ -132,35 +132,31 @@ config B43_PHY_G SoC: BCM4712, BCM5352E config B43_PHY_N - bool "Support for 802.11n (N-PHY) devices" + bool "Support for N-PHY (the main 802.11n series) devices" depends on B43 default y ---help--- - Support for the N-PHY. - - This enables support for devices with N-PHY. - - Say N if you expect high stability and performance. Saying Y will not - affect other devices support and may provide support for basic needs. + This PHY type can be found in the following chipsets: + PCI: BCM4321, BCM4322, + BCM43222, BCM43224, BCM43225, + BCM43131, BCM43217, BCM43227, BCM43228 + SoC: BCM4716, BCM4717, BCM4718, BCM5356, BCM5357, BCM5358 config B43_PHY_LP - bool "Support for low-power (LP-PHY) devices" + bool "Support for LP-PHY (low-power 802.11g) devices" depends on B43 && B43_SSB default y ---help--- - Support for the LP-PHY. The LP-PHY is a low-power PHY built into some notebooks and embedded devices. It supports 802.11a/b/g (802.11a support is optional, and currently disabled). config B43_PHY_HT - bool "Support for HT-PHY (high throughput) devices" + bool "Support for HT-PHY (high throughput 802.11n) devices" depends on B43 && B43_BCMA default y ---help--- - Support for the HT-PHY. - - Enables support for BCM4331 and possibly other chipsets with that PHY. + This PHY type with 3x3:3 MIMO can be found in the BCM4331 PCI chipset. config B43_PHY_LCN bool "Support for LCN-PHY devices (BROKEN)" -- 1.8.4.5 _______________________________________________ b43-dev mailing list [email protected] http://lists.infradead.org/mailman/listinfo/b43-dev
