I have a BackupPC installation running on Ubuntu Server 6.06 LTS. The
server is working fine, but I can't get a Windows XP Home computer to
successfully backup. I installed the rsyncd service (downloaded from
the backuppc project page on sourceforge). When I attempt a backup I
get the following error message:
"auth failed on module docs"
I switched it to the cDrive module, but I get the same error.
I have double and triple checked the host config file on the backuppc
server to ensure the user name and password (RsyncdUsername and
RsyncdPasswd) match what I have in the rsyncd.secrets file.
I've been googling and searching the list archives but haven't found my
answer.
Here is the rsyncd.conf file:
#
# A sample rsyncd.conf file usable with BackupPC. This file does not
# completely document all of the settings for rsyncd.conf - see the
# man page that comes with the rsync ditribution for a comprehensive
# overview off all available settings.
#
#
# Allow rsync to change the root directory to the module location
# upon connection of a client. This is disabled for Win32 as we do
# not provide a full Cygwin environment.
#
# Warning: with a setting of "false", absolute symlinks will be
# stripped of their leading "/". See "use chroot" in the rsyncd.conf
# man page. This is relevant for machines that support symlinks
# (WinXX machines do not).
#
use chroot = false
#
# Limit the simultaneous rsync connections to 4. Changing
# this to '1' should be sufficient for BackupPC.
#
max connections = 1
#
# Uncomment this line and change the path if
# you would like to log rsync messages.
#
log file = c:/rsyncd/rsyncd.log
#
# The location of the rsync process ID file
#
pid file = c:/rsyncd/rsyncd.pid
#
# The locations of the rsync lock file
#
lock file = c:/rsyncd/rsyncd.lock
#
# This is where we define the rsyncd modules. Add as many directories or
# files are you wish. To backup this module using BackupPC, set
# $Conf{RsyncShareName} to "docs" in this client's config.pl.
#
[docs]
#
# Exact DOS style path to the file or directory to be rsync
accessible
#
path = c:/Documents and Settings
#
# A short description of the module. This is what is printed when
# using rsync to "browse" the server for what modules are available.
#
comment = Documents and Settings
#
# Does rsyncd ensure that the secrets file is read only by the
# user running the process? If this is false then no check is
# performed (useful for Win32 systems). However, you can change
# this to "true" and make the secrets file READ ONLY by the user
# running the rysncd process. If running from the command line
# or upon login, this should be the user who is logged in. If
# running as a Win32 service, then the SYSTEM account should be
# the only account that can read the secrets file.
#
strict modes = false
#
# What user(s) have access to this module. The user(s) must be
# defined in the secrets file. A comma or space separated list.
#
# Example:
# auth users = backup, root, larry
# auth users = backup root larry
#
auth users = backuppc backup
#
# The location of the secrets file. Permissions must be READ ONLY
# for the account running the rsyncd process unless
# strict modes = false is set above.
#
secrets file = c:/rsyncd/rsyncd.secrets
#
# What hosts are allowed access to this module? By default, all
# hosts are allowed access. If you wish to further strengthen
# the security of your setup, uncomment and replace with the IP
# address your BackupPC server. This is a flexible setting and
# can be one of:
#
# a dotted decimal IP address: 172.16.0.17
# a address/mask in the form a.b.c.d/n: 172.16.0.0/24
# an address/mask in the form ipaddr/maskaddr:
172.16.0.0/255.255.255.0
# a hostname: backupserver
# a hostname pattern using wildcards: backup*
#
# hosts allow = 172.16.0.17
#
# Only allow clients to READ from the server. This prevents uploads
# from remote machines. If you wish to allow uploads, change this
too
# "true".
#
# WARNING: Setting this to true means that BackupPC restores via
# rsyncd will fail. You most likely want to set this to "false".
#
read only = false
#
# Don't list this module if a client asks (provides another modest
# layer of security since an attacker also has to guess the module
# name - you could make it obscure if you want - but remember the
# module name is sent in plain text so it can be sniffed).
#
list = false
#
# Example of how to share the entire C: drive. For BackupPC "cDrive"
# is the share name (ie: the value of $Conf{RsyncShareName}).
#
[cDrive]
path = c:
comment = Entire Drive
auth users = backuppc
secrets file = c:/rsyncd/rsyncd.secrets
# hosts allow = 172.16.0.17
strict modes = false
read only = true
list = false
here is the contents of the secrets file (username and password changed
to protect the guilty):
backuppc:password
(with carriage-return)
Here is the host config file on the server:
$Conf{XferMethod} = 'rsyncd';
$Conf{RsyncdUsername} = 'backuppc';
$Conf{RsyncdPasswd} = 'password';
$Conf{RsyncShareName} = ['cDrive'];
Thanks in advance for any help.
Aaron
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
BackupPC-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/backuppc-users
http://backuppc.sourceforge.net/
