On Sun, Aug 15, 2010 at 6:58 AM, waverider <[email protected]> wrote: > Thanks luis, > >> >> I have tested Rsync with the remote device using the format: >> rsync -avz -e ssh remoteuser < at > remotehost:/remote/dir /workstation/dir/ >> and the files are copied correctly without asking for password, so rsync is >> working OK. >> >> > > >> >> That error usually means you have a problem with the ssh >> connection.There were several discussions of the "read 4 bytes" error >> on this mailing list. Also about the possible forms to connect with >> ssh. >> >> Try, from the server, to run >> $ ssh root < at > 192.168.72.11 >> >> You'll need a passless ssh connection or some kind of ssh agent. >> Otherwise the backuppc connection will not be successful. >> > > As I said above ssh and rsync work and provide passless connection so the > problem must be in Backuppc config somewhere >
Read EOF: Connection reset by peer If you are sure ssh is working, no ideas, then. Maybe you can tell what linux and backuppc versions you are using, and hope someone else may help. Good luck Luis ------------------------------------------------------------------------------ This SF.net email is sponsored by Make an app they can't live without Enter the BlackBerry Developer Challenge http://p.sf.net/sfu/RIM-dev2dev _______________________________________________ BackupPC-users mailing list [email protected] List: https://lists.sourceforge.net/lists/listinfo/backuppc-users Wiki: http://backuppc.wiki.sourceforge.net Project: http://backuppc.sourceforge.net/
