On 4/13/2011 8:42 AM, ak88 wrote: > Having played with backup pc on defaults and decided it was what I wanted to > implement I decided to set it up properly on my real machine. I have a Raid 1 > array with ext4 and did a new install of BackupPc. > > Tried to edit the config.pl to repoint the top dir from /var/lib/backuppc to > /raid/backuppc and also tried a symlink. On restarting backup pc I get an > error about failing to create hard links on the file system. > > Is Raid 1 a no no with ext4? I tried google but came up with no solution.
Raid 1 and ext4 should not cause any problems, AFAIK. The symlink should definitely have worked, and I believe that changing the TopDir will work with the newer versions (With older versions, you were stuck with the TopDir that was configured at compile-time). The only real limitation is that the pool directory and all of the pc directories must be on the same filesystem and that filesystem must support hard links. Since all of that is below TopDir, you should be fine. What is the exact error you are getting? -- Bowie ------------------------------------------------------------------------------ Forrester Wave Report - Recovery time is now measured in hours and minutes not days. Key insights are discussed in the 2010 Forrester Wave Report as part of an in-depth evaluation of disaster recovery service providers. Forrester found the best-in-class provider in terms of services and vision. Read this report now! http://p.sf.net/sfu/ibm-webcastpromo _______________________________________________ BackupPC-users mailing list BackupPC-users@lists.sourceforge.net List: https://lists.sourceforge.net/lists/listinfo/backuppc-users Wiki: http://backuppc.wiki.sourceforge.net Project: http://backuppc.sourceforge.net/