Hello Craig,
BackupPC reports the right disk usage and i don't have any other BackupPc
daemon running on this machine. I think the disk usage trigger was up at a
time, it was legit. But now, the notification is always sent, no matter
what i'm trying to do.
Anyway, Backups are still OK for now. I will have more time next year to
unlock the situation.
Thanks a lot for your help all, and enjoy the end of the year !
Best Regards,
2017-12-24 13:06 GMT+01:00 Craig Barratt via BackupPC-users <
backuppc-users@lists.sourceforge.net>:
> This log message:
>
> 2017-12-19 01:00:00 24hr disk usage: 68% max, 68% recent, 0 skipped hosts
>
>
> correctly shows the disk usage, and also says that no hosts were skipped.
>
> Is there any chance you are running two different BackupPCs, and the 2nd
> one is on a different system that is in fact 96% full?
>
> Do you see messages like this in the LOG files:
>
> Disk too full (96%); skipped 7 hosts
>
> Craig
>
> On Tue, Dec 19, 2017 at 5:05 AM, Adrien Coestesquis <andrew...@free.fr>
> wrote:
>
>> after installation i changed the topdir setting in the config.pl
>> $Conf{TopDir} = '/backup/backuppc';
>> then i had to copy the entire /var/lib/backuppc arborescence to this new
>> dir in order to make it work
>>
>> i have no var partition and all is clean :
>>
>> root@bak1:/etc/backuppc# df -h
>> Filesystem Size Used Avail Use% Mounted on
>> /dev/md0p1 543G 6.4G 509G 2% /
>> udev 10M 0 10M 0% /dev
>> tmpfs 1.6G 16M 1.5G 1% /run
>> tmpfs 3.8G 0 3.8G 0% /dev/shm
>> tmpfs 5.0M 0 5.0M 0% /run/lock
>> tmpfs 3.8G 0 3.8G 0% /sys/fs/cgroup
>> /dev/sda1 15T 9.4T 4.4T 69% /backup
>>
>>
>> 2017-12-19 13:43 GMT+01:00 Stefan Peter <s_pe...@swissonline.ch>:
>>
>>> Dear Adrien Coestesquis
>>> On 19.12.2017 13:10, Adrien Coestesquis wrote:
>>> > i don't think so, the BPC arborescence is somewhere else
>>>
>>> And BackupPC knows this for real? If I remember correctly, you can
>>> deviate from /var/lib/backuppc only if you install directly from the
>>> sources. If you use an upstream package, you can not.
>>>
>>> Could it be that your /var partition is at 95%?
>>>
>>>
>>> With kind regards
>>>
>>> Stefan Peter
>>>
>>>
>>> ------------------------------------------------------------
>>> ------------------
>>> Check out the vibrant tech community on one of the world's most
>>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>>> _______________________________________________
>>> BackupPC-users mailing list
>>> BackupPC-users@lists.sourceforge.net
>>> List: https://lists.sourceforge.net/lists/listinfo/backuppc-users
>>> Wiki: http://backuppc.wiki.sourceforge.net
>>> Project: http://backuppc.sourceforge.net/
>>>
>>
>>
>> ------------------------------------------------------------
>> ------------------
>> Check out the vibrant tech community on one of the world's most
>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>> _______________________________________________
>> BackupPC-users mailing list
>> BackupPC-users@lists.sourceforge.net
>> List: https://lists.sourceforge.net/lists/listinfo/backuppc-users
>> Wiki: http://backuppc.wiki.sourceforge.net
>> Project: http://backuppc.sourceforge.net/
>>
>>
>
> ------------------------------------------------------------
> ------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> BackupPC-users mailing list
> BackupPC-users@lists.sourceforge.net
> List: https://lists.sourceforge.net/lists/listinfo/backuppc-users
> Wiki: http://backuppc.wiki.sourceforge.net
> Project: http://backuppc.sourceforge.net/
>
>
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
BackupPC-users mailing list
BackupPC-users@lists.sourceforge.net
List: https://lists.sourceforge.net/lists/listinfo/backuppc-users
Wiki: http://backuppc.wiki.sourceforge.net
Project: http://backuppc.sourceforge.net/
