I have a dual drive tape library, and Bacula configured to run four jobs concurrently. This morning, I re-ran a couple of jobs that failed last night (I'm reasonably sure the failures weren't Bacula related), and managed to get Bacula stuck.
More specifically, both jobs wanted to use the same volume, but each one wanted to use a different drive. I've posted (sanitized) configs and a copy of the email output at http://erwin.wpi.edu/~fs/bacula-volume-stuck/ I've seen this problem once or twice, but I'd held off since I'd been running one or two versions behind. In this case, however, everything was all running 2.2.4. Let me know if there's any other info I can send that would be helpful... -- Frank Sweetser fs at wpi.edu | For every problem, there is a solution that WPI Senior Network Engineer | is simple, elegant, and wrong. - HL Mencken GPG fingerprint = 6174 1257 129E 0D21 D8D4 E8A3 8E39 29E3 E2E8 8CEC ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Bacula-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/bacula-devel
