On Saturday 22 August 2009 13:28:40 Dan Langille wrote:
> Dan Langille wrote:
> > Steve Polyack wrote:
> >> Dan Langille wrote:
> >>> I'm trying to get a regression test instance setup. This process
> >>> worked previously when we used svn. Since then, it's been failing, and
> >>> I don't know why.
> >>>
> >>>
> >>> [...@ducky:~/src/BaculaRegressionTesting-TRUNK/regress] $
> >>> scripts/pretest
> >>>
> >>>
> >>> === Starting pretest at 09:14:03 ===
> >>>
> >>> Starting the Bacula Storage daemon
> >>> Starting the Bacula File daemon
> >>> Starting the Bacula Director daemon
> >>> Connecting to Director localhost:8101
> >>> bconsole: bsock.c:228 Socket open error. proto=28 port=8101.
> >>> ERR=Protocol not supported
> >>> Error: Starting Bacula Failed in pretest
> >>> scripts/cleanup
> >>> rm -f tmp/file-list
> >>> rm -fr tmp/* working/* Testing
> >>> rm -f test.out
> >>> rm -f diff
> >>>
> >>> [rest of the output snipped]
> >>>
> >>> I started breaking down the script by steps, and found the error is
> >>> related to this:
> >>>
> >>> $ ${bin}/bconsole -c ${conf}/bconsole.conf
> >>> Connecting to Director localhost:8101
> >>> bconsole: bsock.c:228 Socket open error. proto=28 port=8101.
> >>> ERR=Protocol not supported
> >>> 1000 OK: localhost-dir Version: 3.0.3 (09 August 2009)
> >>> Enter a period to cancel a command.
> >>> *
> >>>
> >>>
> >>> $ netstat -na | grep LISTEN | grep 810
> >>> netstat: kvm not available
> >>> netstat: kvm not available
> >>> tcp4 0 0 10.55.0.20.8101 *.*
> >>> LISTEN tcp4 0 0 10.55.0.20.8102 *.*
> >>> LISTEN tcp4 0 0 10.55.0.20.8103 *.*
> >>> LISTEN
> >>>
> >>> Any ideas?
> >>>
> > > proto=28 maps to AF_INET6, aka IPv6. Does the host you are running
> > > the tests on have IPv6 enabled/built-in?
> >
> > It does not
> >
> > > A quick look at the code shows that it shouldn't attempt to open any
> > > IPv6 sockets unless you are telling it to listen on one. If 'address
> > > = localhost' is being set in bconsole.conf and /etc/hosts resolves
> > > localhost to an IPv6 address first without IPv6 support on the host,
> > > this is likely the problem. Remove the lines mapping localhost to
> > >
> > > ::1.
> >
> > Done. The problem persists this morning.
> >
> > $ grep localhost /etc/hosts
> > #::1 localhost localhost.my.domain
> > 127.0.0.1 localhost localhost.my.domain
> >
> > However, the DNS servers for this system resolve localhost as:
> >
> > ;; QUESTION SECTION:
> > ;localhost. IN A
> >
> > ;; ANSWER SECTION:
> > localhost. 10800 IN A 127.0.0.1
> >
> > ;; AUTHORITY SECTION:
> > localhost. 10800 IN NS localhost.
> >
> > ;; ADDITIONAL SECTION:
> > localhost. 10800 IN AAAA ::1
>
> Regression tests are failing. The suggestion is an IPv6 related issue.
>
> GRANT
> GRANT
> GRANT
> Privileges for regress granted on regress.
> Starting the Bacula Storage daemon
> Starting the Bacula File daemon
> Starting the Bacula Director daemon
> Stopping the Bacula File daemon
> Stopping the Bacula Storage daemon
> Stopping the Bacula Director daemon
> echo "Doing: scripts/do_sed"
> Doing: scripts/do_sed
> scripts/do_sed
> [...@ducky:~/src/BaculaRegressionTesting-TRUNK/regress] $ ./scripts/pretest
>
>
> === Starting pretest at 06:57:45 ===
>
> Starting the Bacula Storage daemon
> Starting the Bacula File daemon
> Starting the Bacula Director daemon
> Connecting to Director localhost:8101
> bconsole: bsock.c:228 Socket open error. proto=28 port=8101.
> ERR=Protocol not supported
> Error: Starting Bacula Failed in pretest
> scripts/cleanup
> ^C
>
> The problem is this line from run_bacula in scripts/functions:
>
> $ cat ${tmp}/bconcmds | ${bin}/bconsole -c ${conf}/bconsole.conf
> Connecting to Director localhost:8101
> bconsole: bsock.c:228 Socket open error. proto=28 port=8101.
> ERR=Protocol not supported
> 1000 OK: localhost-dir Version: 3.0.3 (20 August 2009)
> Enter a period to cancel a command.
> messages
> You have no messages.
> quit
>
>
> If I alter ${conf}/bconsole.conf to replace localhost with 127.0.0.1,
> the command succeeds:
>
> $ cat ${tmp}/bconcmds | ${bin}/bconsole -c ${conf}/bconsole.conf
> Connecting to Director 127.0.0.1:8101
> 1000 OK: localhost-dir Version: 3.0.3 (20 August 2009)
> Enter a period to cancel a command.
> messages
> You have no messages.
> quit
>
> It appears Bacula is getting the IPv6 address of localhost and trying
> that first. It is not getting this from /etc/hosts:
>
> $ grep localhost /etc/hosts
> #::1 localhost localhost.my.domain
> 127.0.0.1 localhost localhost.my.domain
If it failed when you had ::1 defined, then it is a configuration error on
your part since you were defining localhost to have an IPv6 address, which
Bacula will use in preference the the IPv4 address, but it appears that you
do not have IPv6 configured in your kernel or at least for your network.
At least, that is my best guess.
Kern
>
> $ cat /etc/resolv.conf
> search unixathome.org
> nameserver 10.55.0.1
> nameserver 10.55.0.67
>
> $ dig @10.55.0.1 localhost
>
> ; <<>> DiG 9.3.3 <<>> @10.55.0.1 localhost
> ; (1 server found)
> ;; global options: printcmd
> ;; Got answer:
> ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 64352
> ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 1
>
> ;; QUESTION SECTION:
> ;localhost. IN A
>
> ;; ANSWER SECTION:
> localhost. 10800 IN A 127.0.0.1
>
> ;; AUTHORITY SECTION:
> localhost. 10800 IN NS localhost.
>
> ;; ADDITIONAL SECTION:
> localhost. 10800 IN AAAA ::1
>
> ;; Query time: 9 msec
> ;; SERVER: 10.55.0.1#53(10.55.0.1)
> ;; WHEN: Sat Aug 22 07:24:49 2009
> ;; MSG SIZE rcvd: 85
>
>
> It appears Bacula is always trying the IPv6 address first, despite no
> IPV6 support on this box, then failing. Is that what we want? Should
> it not then try IP4 given the address is there?
>
> ---------------------------------------------------------------------------
>--- Let Crystal Reports handle the reporting - Free Crystal Reports 2008
> 30-Day trial. Simplify your report design, integration and deployment - and
> focus on what you do best, core application coding. Discover what's new
> with Crystal Reports now. http://p.sf.net/sfu/bobj-july
> _______________________________________________
> Bacula-devel mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/bacula-devel
------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your report design, integration and deployment - and focus on
what you do best, core application coding. Discover what's new with
Crystal Reports now. http://p.sf.net/sfu/bobj-july
_______________________________________________
Bacula-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-devel
