Hi All, I'm using bacula (version 1.36.3, with Linux/CRUX and kernel 2.6.12, tape unit HP DDS-72) as my primary backup solution. It works very well, but when there is no tape inside the tape unit the backup job fails without ask for the required tape to the operator. Is this behaviour ok ?, how can I avoid it ?
You can see the output of a bacula job when there is no tape inside of the tape unit. 15-Oct 09:00 phfs-dir: Start Backup JobId 10, Job=phfs-fd.2005-10-15_09.00.00 15-Oct 09:02 phfs-fd: phfs-fd.2005-10-15_09.00.00 Fatal error: job.c:1665 Bad response to Append Data command. Wanted 3000 OK data , got 3903 Error append data 15-Oct 09:02 phfs-sd: phfs-fd.2005-10-15_09.00.00 Fatal error: device.c:317 Unable to open device /dev/nst0. ERR=dev.c:289 stored: unable to open device /dev/nst0: ERR=Input/output error Any advice will be very useful. Regards Manuel Ruiz ------------------------------------------------------- This SF.Net email is sponsored by: Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users