Hello everybody,
I use Bacula 1.38.2 whith HP SSL 1016 Autoloader.
SD Config:
# This is the definition for a
# HP SSL1016 Ultrium 460 Autoloader
#
Autochanger {
Name = HP-Library
Device = HP-SSL1016
Changer Device = /dev/sg2
Changer Command = "/usr/local/bacula-1.38.3/etc/mtx-changer %c %o %S %a %d"
}
Device {
Name = HP-SSL1016
Media Type = LTO2
Archive Device = /dev/nst0
# Changer Command = "/usr/local/bacula-1.38.3/etc/mtx-changer %c %o %S %a %d"
AutoChanger = yes
#Autoselect = yes;
AutomaticMount = yes; # when device opened, read it
LabelMedia = yes;
AlwaysOpen = yes;
}
DIR Config:
JobDefs {
Name = "Week-backup"
Type = Backup
Level = Full
Client = nas01-fd
FileSet = "Weekly Full Set"
Schedule = "WeeklyCycle"
RunBeforeJob = "/usr/local/sbin/tape clean"
RunAfter Job = "/usr/local/sbin/tape unload"
Storage = HP-Library
Messages = Standard
Pool = WocheWochensicherung
Priority = 10
}
Then I tried to run a Backup.
The mtx-changer scripts works fine.
But bacula dosent load the tapes.
The command "update slots" ends up in an error "No slots in changer to scan"
Any hints what went wrong?
Many thank in advanced.
- [Bacula-users] Bacula Autochanger Problems Dihor, Viktor
- Re: [Bacula-users] Bacula Autochanger Problems Arno Lehmann
- [Bacula-users] Bacula Autochanger Problems Dihor, Viktor
- Re: [Bacula-users] Bacula Autochanger Problems Dihor, Viktor