I am using LVDSE cables (the really, really tiny connectors), that was the card that fit.
No problems with the kernel (2.6.9-22.0.1.EL SMP) and the adaptec card. Of course, I had no kernel messages about the lsi 53c1010_66, card and it didn't work. On Thu, 12 Jan 2006, Michael Scherer wrote: > On Wed, 11 Jan 2006, Chris Hunter wrote: > > > So the dust has settled; there were two problems: > > i) incompatible SCSI card w/mainboard (tyan s2460) > > ii) bad LTO drive > > > > I now have one LTO-1 drive working in my autochanger (Dell pv128t) with an > > adaptec 39160 pci-x card. > > > > I ran tar to tape at speeds ~1MB/s which led me to think bacula wasn't the > > problem... > > Hehe, I used dd, ran with slow speed too. > > Does the 39160 work at all for you? > I had multiple alerts for the card in the dmesg with a 2.6 kernel. > Dropped it and replaced it with an "old" 2940-UW to connect the tape. > > Greetings, > Michael > -- Chris Hunter Systems Programmer, Astronomy, Yale University [EMAIL PROTECTED] ------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click _______________________________________________ Bacula-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/bacula-users
