-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Are you able to check status on the daemon? How about when you restart
it (if not)?
---- _ _ _ _ ___ _ _ _
|Y#| | | |\/| | \ |\ | | |Ryan Novosielski - User Support Spec. III
|$&| |__| | | |__/ | \| _| |[EMAIL PROTECTED] - 973/972.0922 (2-0922)
\__/ Univ. of Med. and Dent.|IST/AST - NJMS Medical Science Bldg - C630
Sean Proctor wrote:
> Hi,
>
> Yes, the FD is actually running. I got this error after about 2 hours of it
> going through files. Last week it seemed to be happening after about an
> hour. From the status of the FD:
>
> 266 Full 69,064 2,051,170,588 Error 27-Mar-06 14:18 WebServer
>
> This job was started at 12:05. So it ran for about two hours then stopped. I
> tried turning the firewall off last week and I had the same results.
>
> Thanks,
> Sean
>
> On 3/27/06, Ryan Novosielski <[EMAIL PROTECTED]> wrote:
> I'm assuming you know for a fact that the FD is actually running? I see
> noplace that you've indicated that you've checked that it is.
>
> Short of that, connection timed out sounds like it might be firewall
> related... possible someone's been mucking about?
>
> ---- _ _ _ _ ___ _ _ _
> |Y#| | | |\/| | \ |\ | | |Ryan Novosielski - User Support Spec. III
> |$&| |__| | | |__/ | \| _| |[EMAIL PROTECTED] - 973/972.0922 (2-0922)
> \__/ Univ. of Med. and Dent.|IST/AST - NJMS Medical Science Bldg - C630
>
>
> Sean Proctor wrote:
>>>> Hello,
>>>>
>>>> One of the File Daemons in my backup setup has stopped working. The file
>>>> daemon is setup at a datacenter, and the director and storage daemon are
>>>> both located on the same server at my company's office. Here's the error
>>>> message I'm getting:
>>>>
>>>> 27-Mar 14:16 apollo-dir: WebServer.2006-03-27_12.05.20 Fatal error:
> Network
>>>> error with FD during Backup: ERR=Connection timed out
>>>> 27-Mar 14:17 apollo-dir: WebServer.2006-03-27_12.05.20 Fatal error: No
> Job
>>>> status returned from FD.
>>>> 27-Mar 14:17 apollo-dir: WebServer.2006-03-27_12.05.20 Error: Bacula
>>>> 1.38.5(18Jan06): 27-Mar-2006 14:17:08
>>>> JobId: 266
>>>> Job: WebServer.2006-03-27_12.05.20
>>>> Backup Level: Full
>>>> Client: "thor-fd" i686-pc-linux-gnu,debian,3.1
>>>> FileSet: "FullBackup" 2006-01-25 16:20:58
>>>> Pool: "Default"
>>>> Storage: "autochanger-ext"
>>>> Scheduled time: 27-Mar-2006 12:05:13
>>>> Start time: 27-Mar-2006 12:05:22
>>>> End time: 27-Mar-2006 14:17:08
>>>> Priority: 5
>>>> FD Files Written: 0
>>>> SD Files Written: 0
>>>> FD Bytes Written: 0
>>>> SD Bytes Written: 0
>>>> Rate: 0.0 KB/s
>>>> Software Compression: None
>>>> Volume name(s): tape1
>>>> Volume Session Id: 3
>>>> Volume Session Time: 1143476473
>>>> Last Volume Bytes: 14,465,995,903
>>>> Non-fatal FD errors: 0
>>>> SD Errors: 0
>>>> FD termination status: Error
>>>> SD termination status: Running
>>>> Termination: *** Backup Error ***
>>>>
>>>> I'm not sure what to do from here. The configuration was fine before and
> it
>>>> stopped working without my making any changes to it. I'm running
>>>> Debian 3.1on both servers. Bacula
>>>> 1.38.5 on both. Before today I was running 1.36.2 on the FD. I tried
>>>> upgrading to see if it would help.
>>>>
>>>> Director config:
>>>>
>>>> #
>>>> # Default Bacula Director Configuration file
>>>> #
>>>> # The only thing that MUST be changed is to add one or more
>>>> # file or directory names in the Include directive of the
>>>> # FileSet resource.
>>>> #
>>>> # For Bacula release 1.38.5 (18 January 2006) -- debian 3.1
>>>> #
>>>> # You might also want to change the default email address
>>>> # from root to your address. See the "mail" and "operator"
>>>> # directives in the Messages resource.
>>>> #
>>>>
>>>> Director { # define myself
>>>> Name = apollo-dir
>>>> DIRport = 9101 # where we listen for UA connections
>>>> QueryFile = "/usr/local/etc/query.sql"
>>>> WorkingDirectory = "/usr/local/var/bacula/working"
>>>> PidDirectory = "/var/run"
>>>> Maximum Concurrent Jobs = 1
>>>> Password = "q46rqcd9zjJHa7CjZWlJpsZRk+977vPxgOdiYhiUOxdv" #
>>>> Console password
>>>> Messages = Daemon
>>>> }
>>>>
>>>> JobDefs {
>>>> Name = "DefaultJob"
>>>> Type = Backup
>>>> Level = Incremental
>>>> Client = apollo-fd
>>>> FileSet = "Full Set"
>>>> Schedule = "WeeklyCycle"
>>>> Storage = autochanger-int
>>>> Messages = Standard
>>>> Pool = Default
>>>> Priority = 6
>>>> }
>>>>
>>>> JobDefs {
>>>> Name = "ThorJob"
>>>> Type = Backup
>>>> Level = Incremental
>>>> Client = thor-fd
>>>> FileSet = "FullBackup"
>>>> Schedule = "WeeklyCycle"
>>>> Storage = autochanger-ext
>>>> Messages = Standard
>>>> Pool = Default
>>>> Priority = 5
>>>> }
>>>>
>>>> JobDefs {
>>>> Name = "ApolloJob"
>>>> Type = Backup
>>>> Level = Incremental
>>>> Client = apollo-fd
>>>> FileSet = "FullBackup"
>>>> Schedule = "WeeklyCycle"
>>>> Storage = autochanger-int
>>>> Messages = Standard
>>>> Pool = Default
>>>> Priority = 7
>>>> }
>>>>
>>>> JobDefs {
>>>> Name = "WinSvrJob"
>>>> Type = Backup
>>>> Level = Incremental
>>>> Client = winsvr-fd
>>>> FileSet = "FullWinBackup"
>>>> Schedule = "WeeklyCycle"
>>>> Storage = autochanger-int
>>>> Messages = Standard
>>>> Pool = Default
>>>> Priority = 10
>>>> }
>>>>
>>>>
>>>> #
>>>> # Define the main nightly save backup job
>>>> # By default, this job will back up to disk in /tmp
>>>> #Job {
>>>> # Name = "Client1"
>>>> # JobDefs = "DefaultJob"
>>>> # Write Bootstrap = "/usr/local/var/bacula/working/Client1.bsr"
>>>> #}
>>>>
>>>> #
>>>> # Define the main nightly save backup job
>>>> Job {
>>>> Name = "WinSvrBackup"
>>>> JobDefs = "WinSvrJob"
>>>> Write Bootstrap = "/usr/local/var/bacula/working/winsvr.bsr"
>>>> }
>>>>
>>>> #
>>>> # Define the main nightly save backup job
>>>> Job {
>>>> Name = "WebServer"
>>>> JobDefs = "ThorJob"
>>>> Write Bootstrap = "/usr/local/var/bacula/working/webserver.bsr"
>>>> }
>>>>
>>>> #
>>>> # Define the main nightly save backup job
>>>> Job {
>>>> Name = "BackupServer"
>>>> JobDefs = "ApolloJob"
>>>> Write Bootstrap = "/usr/local/var/bacula/working/backupserver.bsr"
>>>> }
>>>>
>>>> #Job {
>>>> # Name = "Client2"
>>>> # Client = apollo2-fd
>>>> # JobDefs = "DefaultJob"
>>>> # Write Bootstrap = "/usr/local/var/bacula/working/Client2.bsr"
>>>> #}
>>>>
>>>> # Backup the catalog database (after the nightly save)
>>>> Job {
>>>> Name = "BackupCatalog"
>>>> JobDefs = "DefaultJob"
>>>> Level = Full
>>>> FileSet="Catalog"
>>>> Schedule = "WeeklyCycleAfterBackup"
>>>> # This creates an ASCII copy of the catalog
>>>> RunBeforeJob = "/usr/local/etc/make_catalog_backup bacula bacula
> bacula"
>>>> # This deletes the copy of the catalog
>>>> RunAfterJob = "/usr/local/etc/delete_catalog_backup"
>>>> Write Bootstrap = "/usr/local/var/bacula/working/BackupCatalog.bsr"
>>>> Priority = 11 # run after main backup
>>>> }
>>>>
>>>> #
>>>> # Standard Restore template, to be changed by Console program
>>>> # Only one such job is needed for all Jobs/Clients/Storage ...
>>>> #
>>>> Job {
>>>> Name = "RestoreFiles"
>>>> Type = Restore
>>>> Client=apollo-fd
>>>> FileSet="Full Set"
>>>> Storage = File
>>>> Pool = Default
>>>> Messages = Standard
>>>> Where = /tmp/bacula-restores
>>>> }
>>>>
>>>>
>>>> #
>>>> # Standard Restore template, to be changed by Console program
>>>> # Only one such job is needed for all Jobs/Clients/Storage ...
>>>> #
>>>> Job {
>>>> Name = "RestoreWebServer"
>>>> Type = Restore
>>>> Client=thor-fd
>>>> FileSet="FullBackup"
>>>> Storage = autochanger-ext
>>>> Pool = Default
>>>> Messages = Standard
>>>> Where = /tmp/bacula-restores
>>>> }
>>>>
>>>>
>>>> #
>>>> # Standard Restore template, to be changed by Console program
>>>> # Only one such job is needed for all Jobs/Clients/Storage ...
>>>> #
>>>> Job {
>>>> Name = "RestoreWinSvr"
>>>> Type = Restore
>>>> Client=winsvr-fd
>>>> FileSet="FullWinBackup"
>>>> Storage = autochanger-int
>>>> Pool = Default
>>>> Messages = Standard
>>>> Where = /tmp/bacula-restores
>>>> }
>>>>
>>>> # List of files to be backed up
>>>> FileSet {
>>>> Name = "FullBackup"
>>>> Include {
>>>> Options {
>>>> signature = MD5
>>>> }
>>>> #
>>>> # Put your list of files here, preceded by 'File =', one per line
>>>> # or include an external list with:
>>>> #
>>>> # File = <file-name
>>>> #
>>>> # Note: / backs up everything on the root partition.
>>>> # if you have other partitons such as /usr or /home
>>>> # you will probably want to add them too.
>>>> #
>>>> # By default this is defined to point to the Bacula build
>>>> # directory to give a reasonable FileSet to backup to
>>>> # disk storage during initial testing.
>>>> #
>>>> File = /
>>>> File = /home
>>>> File = /usr
>>>> File = /var
>>>> }
>>>>
>>>> #
>>>> # If you backup the root directory, the following two excluded
>>>> # files can be useful
>>>> #
>>>> Exclude {
>>>> File = /proc
>>>> File = /tmp
>>>> File = /.journal
>>>> File = /.fsck
>>>> File = /var/local/old-server
>>>> }
>>>> }
>>>>
>>>> # List of files to be backed up
>>>> FileSet {
>>>> Name = "FullWinBackup"
>>>> Enable VSS = yes
>>>> Include {
>>>> Options {
>>>> signature = MD5
>>>> }
>>>> #
>>>> # Put your list of files here, preceded by 'File =', one per line
>>>> # or include an external list with:
>>>> #
>>>> # File = <file-name
>>>> #
>>>> # Note: / backs up everything on the root partition.
>>>> # if you have other partitons such as /usr or /home
>>>> # you will probably want to add them too.
>>>> #
>>>> # By default this is defined to point to the Bacula build
>>>> # directory to give a reasonable FileSet to backup to
>>>> # disk storage during initial testing.
>>>> #
>>>> File = "c:\\"
>>>> File = "d:\\"
>>>> }
>>>>
>>>> #
>>>> # If you backup the root directory, the following two excluded
>>>> # files can be useful
>>>> #
>>>> Exclude {
>>>> }
>>>> }
>>>>
>>>> # List of files to be backed up
>>>> FileSet {
>>>> Name = "Full Set"
>>>> Include {
>>>> Options {
>>>> signature = MD5
>>>> }
>>>> #
>>>> # Put your list of files here, preceded by 'File =', one per line
>>>> # or include an external list with:
>>>> #
>>>> # File = <file-name
>>>> #
>>>> # Note: / backs up everything on the root partition.
>>>> # if you have other partitons such as /usr or /home
>>>> # you will probably want to add them too.
>>>> #
>>>> # By default this is defined to point to the Bacula build
>>>> # directory to give a reasonable FileSet to backup to
>>>> # disk storage during initial testing.
>>>> #
>>>> File = /usr/src/bacula-1.38.5
>>>> }
>>>>
>>>> #
>>>> # If you backup the root directory, the following two excluded
>>>> # files can be useful
>>>> #
>>>> Exclude {
>>>> File = /proc
>>>> File = /tmp
>>>> File = /.journal
>>>> File = /.fsck
>>>> }
>>>> }
>>>>
>>>> #
>>>> # When to do the backups, full backup on first sunday of the month,
>>>> # differential (i.e. incremental since full) every other sunday,
>>>> # and incremental backups other days
>>>> Schedule {
>>>> Name = "WeeklyCycle"
>>>> Run = Full 1st sun at 23:05
>>>> Run = Differential 2nd-5th sun at 23:05
>>>> Run = Incremental mon-sat at 23:05
>>>> }
>>>>
>>>> # This schedule does the catalog. It starts after the WeeklyCycle
>>>> Schedule {
>>>> Name = "WeeklyCycleAfterBackup"
>>>> Run = Full sun-sat at 23:10
>>>> }
>>>>
>>>> # This is the backup of the catalog
>>>> FileSet {
>>>> Name = "Catalog"
>>>> Include {
>>>> Options {
>>>> signature = MD5
>>>> }
>>>> File = /usr/local/var/bacula/working/bacula.sql
>>>> }
>>>> }
>>>>
>>>> # Client (File Services) to backup
>>>> Client {
>>>> Name = winsvr-fd
>>>> Address = 192.168.86.5
>>>> FDPort = 9102
>>>> Catalog = MyCatalog
>>>> Password = ... # password for FileDaemon
>>>> File Retention = 30 days # 30 days
>>>> Job Retention = 6 months # six months
>>>> AutoPrune = yes # Prune expired Jobs/Files
>>>> }
>>>>
>>>> # Client (File Services) to backup
>>>> Client {
>>>> Name = thor-fd
>>>> Address = world-inet.com
>>>> FDPort = 9102
>>>> Catalog = MyCatalog
>>>> Password = ... # password for FileDaemon
>>>> File Retention = 30 days # 30 days
>>>> Job Retention = 6 months # six months
>>>> AutoPrune = yes # Prune expired Jobs/Files
>>>> }
>>>>
>>>> # Client (File Services) to backup
>>>> Client {
>>>> Name = apollo-fd
>>>> Address = 192.168.86.10
>>>> FDPort = 9102
>>>> Catalog = MyCatalog
>>>> Password = ... # password for FileDaemon
>>>> File Retention = 30 days # 30 days
>>>> Job Retention = 6 months # six months
>>>> AutoPrune = yes # Prune expired Jobs/Files
>>>> }
>>>>
>>>> #
>>>> # Second Client (File Services) to backup
>>>> # You should change Name, Address, and Password before using
>>>> #
>>>> #Client {
>>>> # Name = apollo2-fd
>>>> # Address = apollo2
>>>> # FDPort = 9102
>>>> # Catalog = MyCatalog
>>>> # Password = ... # password for FileDaemon 2
>>>> # File Retention = 30 days # 30 days
>>>> # Job Retention = 6 months # six months
>>>> # AutoPrune = yes # Prune expired Jobs/Files
>>>> #}
>>>>
>>>>
>>>> # Definition of file storage device
>>>> Storage {
>>>> Name = File
>>>> # Do not use "localhost" here
>>>> Address = 192.168.86.10 # N.B. Use a fully qualified
> name
>>>> here
>>>> SDPort = 9103
>>>> Password = ...
>>>> Device = FileStorage
>>>> Media Type = File
>>>> }
>>>>
>>>>
>>>>
>>>> # Definition of AIT-3 autochanger tape storage device
>>>> Storage {
>>>> Name = autochanger-ext
>>>> # Do not use "localhost" here
>>>> Address = office.world-inet.com # N.B. Use a fully
>>>> qualified name here
>>>> SDPort = 9103
>>>> Password = ... # password for Storage daemon
>>>> Device = Autochanger # must be same as Device in
>>>> Storage daemon
>>>> Media Type = AIT-3 # must be same as MediaType in
> Storage
>>>> daemon
>>>> Autochanger = yes # enable for autochanger device
>>>> }
>>>>
>>>> # Definition of AIT-3 autochanger tape storage device
>>>> Storage {
>>>> Name = autochanger-int
>>>> # Do not use "localhost" here
>>>> Address = 192.168.86.10 # N.B. Use a fully qualified
> name
>>>> here
>>>> SDPort = 9103
>>>> Password = ... # password for Storage daemon
>>>> Device = Autochanger # must be same as Device in
>>>> Storage daemon
>>>> Media Type = AIT-3 # must be same as MediaType in
> Storage
>>>> daemon
>>>> Autochanger = yes # enable for autochanger device
>>>> }
>>>>
>>>> # Definition of 8mm tape storage device
>>>> #Storage {
>>>> # Name = "8mmDrive"
>>>> # Do not use "localhost" here
>>>> # Address = apollo # N.B. Use a fully qualified name
> here
>>>> # SDPort = 9103
>>>> # Password = ...
>>>> # Device = "Exabyte 8mm"
>>>> # MediaType = "8mm"
>>>> #}
>>>>
>>>> # Definition of DVD storage device
>>>> #Storage {
>>>> # Name = "DVD"
>>>> # Do not use "localhost" here
>>>> # Address = apollo # N.B. Use a fully qualified name
> here
>>>> # SDPort = 9103
>>>> # Password = ...
>>>> # Device = "DVD Writer"
>>>> # MediaType = "DVD"
>>>> #}
>>>>
>>>>
>>>> # Generic catalog service
>>>> Catalog {
>>>> Name = MyCatalog
>>>> dbname = bacula; user = bacula; password = "bacula"
>>>> }
>>>>
>>>> # Reasonable message delivery -- send most everything to email address
>>>> # and to the console
>>>> Messages {
>>>> Name = Standard
>>>> #
>>>> # NOTE! If you send to two email or more email addresses, you will need
>>>> # to replace the %r in the from field (-f part) with a single valid
>>>> # email address in both the mailcommand and the operatorcommand.
>>>> #
>>>> mailcommand = "/usr/local/sbin/bsmtp -h localhost -f \"\(Bacula\) %r\"
> -s
>>>> \"Bacula: %t %e of %c %l\" %r"
>>>> operatorcommand = "/usr/local/sbin/bsmtp -h localhost -f \"\(Bacula\)
> %r\"
>>>> -s \"Bacula: Intervention needed for %j\" %r"
>>>> mail = [EMAIL PROTECTED] = all, !skipped
>>>> operator = [EMAIL PROTECTED] = mount
>>>> console = all, !skipped, !saved
>>>> #
>>>> # WARNING! the following will create a file that you must cycle from
>>>> # time to time as it will grow indefinitely. However, it will
>>>> # also keep all your messages if they scroll off the console.
>>>> #
>>>> append = "/usr/local/var/bacula/working/log" = all, !skipped
>>>> }
>>>>
>>>>
>>>> #
>>>> # Message delivery for daemon messages (no job).
>>>> Messages {
>>>> Name = Daemon
>>>> mailcommand = "/usr/local/sbin/bsmtp -h localhost -f \"\(Bacula\) %r\"
> -s
>>>> \"Bacula daemon message\" %r"
>>>> mail = [EMAIL PROTECTED] = all, !skipped
>>>> console = all, !skipped, !saved
>>>> append = "/usr/local/var/bacula/working/log" = all, !skipped
>>>> }
>>>>
>>>>
>>>>
>>>>
>>>> # Default pool definition
>>>> Pool {
>>>> Name = Default
>>>> Pool Type = Backup
>>>> Recycle = yes # Bacula can automatically recycle
>>>> Volumes
>>>> AutoPrune = yes # Prune expired volumes
>>>> Volume Retention = 365 days # one year
>>>> Accept Any Volume = yes # write on any volume in the pool
>>>> }
>>>>
>>>> #
>>>> # Restricted console used by tray-monitor to get the status of the
> director
>>>> #
>>>> Console {
>>>> Name = apollo-mon
>>>> Password = ...
>>>> CommandACL = status, .status
>>>> }
>>>>
>>>>
>>>> FD config:
>>>>
>>>> #
>>>> # Default Bacula File Daemon Configuration file
>>>> #
>>>> # For Bacula release 1.36.2 (28 February 2005) -- debian 3.1
>>>> #
>>>> # There is not much to change here except perhaps the
>>>> # File daemon Name to
>>>> #
>>>>
>>>> #
>>>> # List Directors who are permitted to contact this File daemon
>>>> #
>>>> Director {
>>>> Name = apollo-dir
>>>> Password = "piw4zIqWmm2c6wRZWtNy2ZxWj3EBjrbgk7HqchCUG4Ck"
>>>> }
>>>>
>>>> #
>>>> # Restricted Director, used by tray-monitor to get the
>>>> # status of the file daemon
>>>> #
>>>> Director {
>>>> Name = apollo-mon
>>>> Password = "1gZYyoTBH36jcrNZixhV5C5uhps7GQ6jefl2E5mZrFAp"
>>>> Monitor = yes
>>>> }
>>>>
>>>> #
>>>> # "Global" File daemon configuration specifications
>>>> #
>>>> FileDaemon { # this is me
>>>> Name = thor-fd
>>>> FDport = 9102 # where we listen for the director
>>>> WorkingDirectory = /var/lib/bacula
>>>> Pid Directory = /var/run
>>>> Maximum Concurrent Jobs = 20
>>>> }
>>>>
>>>> # Send all messages except skipped files back to Director
>>>> Messages {
>>>> Name = Standard
>>>> director = apollo-dir = all, !skipped
>>>> }
>>>>
>>>> Thanks,
>>>> Sean Proctor
>>>>
>>
>>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.2.2 (MingW32)
iD8DBQFEKFs1mb+gadEcsb4RAhr5AKCU3uilwjt0ntq0WVpWtOJlHMtmWQCgoZWP
KZTSbQoOdZA75tizi+tCYZA=
=A8hn
-----END PGP SIGNATURE-----
-------------------------------------------------------
This SF.Net email is sponsored by xPML, a groundbreaking scripting language
that extends applications into web and mobile media. Attend the live webcast
and join the prime developer group breaking into this new coding territory!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642
_______________________________________________
Bacula-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-users
