On Monday 10 April 2006 18:33, Gabriele Bulfon wrote: > ...I'm worrying about it because the list of "Got EOF on tape." never ends, > until I kill the btape/test; should I wait longer?
Sorry, my error. I did not read what you wrote carefully enough. If you are getting that during a restore, there is no problem and my previous comments apply. Since you are getting that during the btape "test" command as you are, then yes, it indicates that your Device specification in the bacula-sd.conf file does not match your OS and tape drive. You must correct this condition before Bacula will work correctly. The btape tests must run to completion correctly there are some "got EOF" messages but only 5-10. Perhaps if you send your bacula-sd.conf file to the list, someone can help you debug the problems. It would also be a good idea to send a copy of the output of btape "test" (of course, truncating any big number of "got EOF" messages). By the way, Bacula 1.36.2 is quite old and no longer "officially" supported ... > And I'm worrying because > in the pdf document, you state that if you get this output, it's probably > because of the variable / fixed-size block setting, and that I should fix > it. I'm worrying because I cannot run a single "./bls -c > ../etc/bacula-sd.conf -j -v -V THURSDAY2 QUANTUM" on any tape (old or > recent), because it will fail to show me but the first job. And finally I'm > worrying because I cannot run a single "./bextract ....." on jobs that ar > not the first one. It seems like command line tools can work only on a > short amount of data that stays at the beginning of the tape. ...I'm really > worried...please help.... > Gabriele Bulfon - Sonicle S.r.l. > Tel +39 028246016 Int. 30 - Fax +39 028243880 > Via Felice Cavallotti 16 - 20089, Rozzano - Milano - ITALY > http://www.sonicle.com > --------------------------------------------------------------------------- >------- Da: Kern Sibbald <[EMAIL PROTECTED]> > A: Gabriele Bulfon <[EMAIL PROTECTED]> > Cc: bacula-users <bacula-users@lists.sourceforge.net> > Data: 10 aprile 2006 18.24.02 CEST > Oggetto: Re: [Bacula-users] restoring > I don't know why you are worrying about the "got EOF" messages. They are > quite normal. They are not error messages. Bacula is *very* careful to put > the word "error" in error messages or "warning" in possible error messages. > If neither of those words are in the message, it can be considered an > "informational" message and not normally anything to worry about. > > On Monday 10 April 2006 18:14, Gabriele Bulfon wrote: > > I tried the btape tests on clean systems: > > Sun v20z, AMD64, Solaris 10, self compiled bacula 1.36.2, Quantum Ultrium > > LTO2. SunFire280R, Sparcv9, Solaris 10, self compiled bacula 1.36.2, > > Quantum Ultrium LTO2. I always get the long list of "got EOF"....but I'm > > sure that the system defaults to variable block size. I even tried > > substituting the Quantum device with a certified Sun-Dat72 : same > > results. I believe that until I can't get rid of these "got EOF" during > > tests, I will have my problem (able to restore via bconsole, not able to > > restore through command line). Do you think there may be something wrong > > in the way I compiled binaries on Solaris? Is there any issue about the > > 64 bit platform? The binaries are all 32bit ones: may be this a problem? > > Is there any specific issue pertaining to the Solaris 10 platform? Thanks > > for any help. > > Gabriele Bulfon - Sonicle S.r.l. > > Tel +39 028246016 Int. 30 - Fax +39 028243880 > > Via Felice Cavallotti 16 - 20089, Rozzano - Milano - ITALY > > http://www.sonicle.com > > ------------------------------------------------------------------------- > >-- ------- Da: Kern Sibbald <[EMAIL PROTECTED]> > > A: bacula-users@lists.sourceforge.net > > Cc: Gabriele Bulfon <[EMAIL PROTECTED]> > > Data: 10 aprile 2006 11.50.50 CEST > > Oggetto: Re: [Bacula-users] restoring > > > > On Monday 10 April 2006 09:25, Kern Sibbald wrote: > > > On Sunday 09 April 2006 23:21, Gabriele Bulfon wrote: > > > > Thanx for your suggestions. > > > > Don't you think that it's strange that bacula can restore from > > > > bconsole, and not from manual commands? > > > > > > All but the highest level code that reads a Volume is identical between > > > all Bacula components, so there is unlikely to be any difference > > > between jobs run from bconsole and using the standalone tools. > > > > > > > Is it a possible situation with a badly conficured device? > > > > > > Since the code is the same, my answer is: no. > > > > > > Your problem is most likely a bad tape or a dirty drive as I mentioned > > > last time. An I/O error as you got means a hardware problem not a > > > software problem. The manual lists other possibilities. > > > > Well, yes, I should probably be more explicit as I don't always > > distinguish between OS problems and hardware problems. > > I should have said that this is very unlikely to be an application > > program (Bacula) error. If there is an I/O error, either the kernel > > driver is buggy or there is a problem with the hardware (which could also > > be the firmware in the tape drive). > > > > > > Actually I never happened to encounter this problem, because I could > > > > always restore anything that was still in the database. Gabriele > > > > Bulfon - Sonicle S.r.l. > > > > Tel +39 028246016 Int. 30 - Fax +39 028243880 > > > > Via Felice Cavallotti 16 - 20089, Rozzano - Milano - ITALY > > > > http://www.sonicle.com > > > > --------------------------------------------------------------------- > > > >-- -- -- ------- Da: Kern Sibbald <[EMAIL PROTECTED]> > > > > A: bacula-users@lists.sourceforge.net > > > > Cc: Gabriele Bulfon <[EMAIL PROTECTED]> > > > > Data: 9 aprile 2006 10.25.44 CEST > > > > Oggetto: Re: [Bacula-users] restoring > > > > > > > > On Saturday 08 April 2006 13:02, Gabriele Bulfon wrote: > > > > > Hello, > > > > > yesterday I was trying to restore an old file from an old backup > > > > > tape that is no more in the database. So I tried using first btape > > > > > and bls to check the content. > > > > > With btape I could read the original label. > > > > > With bls I was trying to get the list of jobs numbers present in > > > > > the tape (this tape should contain 5 jobs of 5 different clients on > > > > > the same day). But this is what I got from the system: > > > > > -bash-3.00# ./bls -c ../etc/bacula-sd.conf -j -v -V FRIDAY QUANTUM > > > > > bls: butil.c:258 Using device: "QUANTUM" for reading. > > > > > 08-Apr 12:47 bls: Ready to read from volume "FRIDAY" on device > > > > > /dev/rmt/0. Volume Label: > > > > > Id : Bacula 1.0 immortal > > > > > VerNo : 11 > > > > > VolName : FRIDAY > > > > > PrevVolName : > > > > > VolFile : 0 > > > > > LabelType : VOL_LABEL > > > > > LabelSize : 162 > > > > > PoolName : FridayPool > > > > > MediaType : LTO > > > > > PoolType : Backup > > > > > HostName : iserver > > > > > Date label written: 20-Jul-2005 10:39 > > > > > Begin Job Session Record: > > > > > JobId : 16 > > > > > VerNum : 11 > > > > > PoolName : FridayPool > > > > > PoolType : Backup > > > > > JobName : Enterprise Backup > > > > > ClientName : iserver-fd > > > > > Job (unique name) : Enterprise_Backup.2006-04-07_23.00.00 > > > > > FileSet : Full Set > > > > > JobType : B > > > > > JobLevel : F > > > > > Date written : 07-Apr-2006 23:00 > > > > > 08-Apr 12:48 bls: Got EOF at file 1 on device /dev/rmt/0, Volume > > > > > "FRIDAY" 08-Apr 12:48 bls: bls Error: block.c:782 Read error at > > > > > file:blk 1:0 on device /dev/rmt/0. ERR=I/O error. 08-Apr 12:48 bls: > > > > > End of Volume at file 1 on device /dev/rmt/0, Volume "FRIDAY" > > > > > 08-Apr 12:48 bls: End of all volumes. End of physical tape. > > > > > 08-Apr 12:48 bls: ERROR in dev.c:1288 dev.c:1287 This device does > > > > > not support Unknown. -bash-3.00# > > > > > Then, to check the system, I placed other recent tapes in the LTO > > > > > drive, and issued the same commands. Always the same error.... > > > > > I even tried to force a "bextract", knowning what was inside the > > > > > tape, with the same errors. So I did the same on other systems I > > > > > have at customers.....always the same problem!.... I was worried. > > > > > At last, I tried restoring a file from a recent tape that is in the > > > > > database, so I could use bconsole/restore and the file was > > > > > correctly restored!........but the same tape gives errors with > > > > > manual commands. This problem doesn't let me restore tapes that are > > > > > no more in the database. I did not try to run a "bscan" yet, on a > > > > > separate and clean machine, but I assume it will be producing the > > > > > same errors while trying to recreate the db. Any idea about this? > > > > > > > > It looks like Bacula got an error trying to read the data on your > > > > tape. I suspect that your drive is dirty or your media is bad. You > > > > might try cleaning your tape drive. > > > > You should also run the btape "test" command if you haven't already > > > > to ensure that your Device directives are compatibile with your > > > > drive. Also, it appears that Bacula's code is attempting to issue an > > > > unsupported ioctl() *after* the tape go an error. > > > > > > > > > Machines are Sun v20z amd64, Solaris 10, Bacula 1.36.2 compiled > > > > > with gcc in 32 bit mode. Drives are Certance Ultrium LTO2. > > > > > Gabriele. > > > > > Gabriele Bulfon - Sonicle S.r.l. > > > > > Tel +39 028246016 Int. 30 - Fax +39 028243880 > > > > > Via Felice Cavallotti 16 - 20089, Rozzano - Milano - ITALY > > > > > http://www.sonicle.com > > > > > > > > -- > > > > Best regards, > > > > Kern > > > > ("> > > > > /\ > > > > V_V > > > > -- > > Best regards, > > Kern > > ("> > > /\ > > V_V > > -- > Best regards, > Kern > ("> > /\ > V_V -- Best regards, Kern ("> /\ V_V ------------------------------------------------------- This SF.Net email is sponsored by xPML, a groundbreaking scripting language that extends applications into web and mobile media. Attend the live webcast and join the prime developer group breaking into this new coding territory! http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642 _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
