Sorry I'm too poor to have an autochanger :-). Someone else will have to take over from here.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of John Boris Sent: Monday, April 17, 2006 11:27 AM To: bacula-users@lists.sourceforge.net Subject: RE: [Bacula-users] Newbie Configuration Question Ok. Thanks to Robert and some more RTFM work I was able to start bacula. I now have a new issue. This is the first time running this so bacula sees that no Full backup was performed and elevates the differential to a Full. Here is what I get: *run A job name must be specified. The defined Job resources are: 1: Client1 2: Client2 3: BackupCatalog 4: RestoreFiles Select Job resource (1-4): 2 Run Backup job JobName: Client2 FileSet: Full Set Level: Incremental Client: jerome-fd Storage: Drive-0 Pool: Default When: 2006-04-17 14:21:22 Priority: 10 OK to run? (yes/mod/no): yes Job started. JobId=17 * 17-Apr 14:21 jerome-dir: No prior Full backup Job record found. 17-Apr 14:21 jerome-dir: No prior or suitable Full backup found. Doing FULL backup. 17-Apr 14:21 jerome-dir: Start Backup JobId 17, Job=Client2.2006-04-17_14.21.32 17-Apr 14:21 jerome-sd: Job Client2.2006-04-17_14.21.32 waiting. Cannot find any appendable volumes. Please use the "label" command to create a new Volume for: Storage: "Drive-0" (/dev/nst1) Media type: LTO-2 Pool: Default *label The defined Storage resources are: 1: File 2: Drive-0 Select Storage resource (1-2): 2 Enter new Volume name: Volume1 Enter slot (0 or Enter for none): 1 Automatically selected Pool: Default Connecting to Storage daemon Drive-0 at jerome:9103 ... Sending label command for Volume "Volume1" Slot 1 ... 3301 Issuing autochanger "loaded drive 0" command. 3302 Autochanger "loaded drive 0", result: nothing loaded. 3304 Issuing autochanger "load slot 1, drive 0" command. 3305 Autochanger "load slot 1, drive 0", status is OK. 3301 Issuing autochanger "loaded drive 0" command. 3302 Autochanger "loaded drive 0", result is Slot 1. dev.c:362 dev.c:356 Unable to open device "Drive-0" (/dev/nst1): ERR=Input/output error 3910 Unable to open device "Drive-0" (/dev/nst1): ERR=dev.c:356 Unable to open device "Drive-0" (/dev/nst1): ERR=Input/output error Label command failed for Volume Volume1. Do not forget to mount the drive!!! I watched the staus on the Dell-124T and bacula was succesful in loading the tape from Slot 1 into the drive. So why didn't it label the tape? Since I have 8 tapes in this magazine do I have to label each tape? John J. Boris, Sr. JEN-A-SyS Administrator Archdiocese of Philadelphia "Remember! That light at the end of the tunnel Just might be the headlight of an oncoming train!" ------------------------------------------------------- This SF.Net email is sponsored by xPML, a groundbreaking scripting language that extends applications into web and mobile media. Attend the live webcast and join the prime developer group breaking into this new coding territory! http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642 _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users ------------------------------------------------------- This SF.Net email is sponsored by xPML, a groundbreaking scripting language that extends applications into web and mobile media. Attend the live webcast and join the prime developer group breaking into this new coding territory! http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642 _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
