On Monday 26 June 2006 12:39, Christopher wrote:
> Thanks for the reply,
>
> Is it the Makefile for the rescue cd that has the option for running under
> qemu?
Yes,
cd <rescue>/linux/cdrom
make boot
I generally run qemu as non-root out of fear something could go wrong.
Take note of what it puts in the title bar (I forget exactly) when it starts,
because it tells you how to get out of capture mode. It tends to get into
mouse capture mode depending where and how you click the mouse and you need
to know how to get out of it or you are more or less cooked.
>
> I must be doing something wrong, as I installed qemu rpm, and get:
>
> Could not initialize SDL - exiting
If you are using "make boot" and you built with a non-smp kernel as you
indicate below, then you probably need to tweak the qemu conf file. I
haven't run it for over a year so I have no idea what I did ...
>
> Any tips would be great.
>
> I am not using an smp kernel, so I am just wondering if this may be yet
> another bug with fedora core 5. ( I did read about your nightmare with
> upgrading).
Perhaps it is a FC5 problem. I would hesitate to say. I'd recommend loading
rescue version 1.8.2 from Source Forge and trying it. If it fails, then
there is clearly something wrong because I have made a lot of FC4 rescue
disks with that version and never had any problems.
Yes, I have given up on Fedora. Their mixture of stability, current software,
security fixes no longer meets my personal requirements for stability. I am
tired of wasting time (lots) on simple machine administration. My
development machine is still rather crippled (I cannot print using the lpr
command), so I'll be switching to another distro in the near future (probably
a week but almost certainly not more than a month).
>
> > On Monday 26 June 2006 10:16, Christopher wrote:
> >> I am posting this again, as I have not received a reply, and the archive
> >> on source forge does not appear to have been updated in about 5 days. I
> >> really need to get this issue resolved.
> >
> > I did send you a reply. If that is not the problem, then I don't know
> > what is
> > going on.
> >
> > Unfortunately, debugging it is a bit difficult, but can be done under
> > qemu providing you force it to use a NON-smp kernel. qemu at least the
> > last version I had could not handle smp kernels. The Makefile has a
> > target that
> > runs the iso under qemu.
> >
> > I don't have the time to properly maintain the package, which is
> > *extremely*
> > useful and has saved me at least 3 or 4 times from doing major restores.
> > I
> > am considering switching to using mkcdrec, which looks like a very well
> > written and maintained package. It also looks relatively simple for
> > someone
> > to add the Bacula specific code. I am looking for someone who would like
> > to
> > do this project.
> >
> >> I am using bash as the root login shell.
> >>
> >> /bin/sh is shown as below from the shell:
> >>
> >> [EMAIL PROTECTED] etc]# which sh
> >> /bin/sh
> >> [EMAIL PROTECTED] etc]# cd /bin
> >> [EMAIL PROTECTED] bin]# ls -l sh
> >> lrwxrwxrwx 1 root root 4 May 28 23:27 sh -> bash
> >>
> >> The contents of the rootetc.list file in the cdrom build directory is:
> >>
> >> /etc/bashrc
> >> /etc/exports
> >> /etc/gshadow
> >> /etc/shadow
> >> /etc/passwd
> >> /etc/group
> >> /etc/hosts
> >> /etc/filesystems
> >> /etc/fstab
> >> /etc/protocols
> >> /etc/localtime
> >> /etc/ld.so.cache
> >> /etc/syslog.conf
> >>
> >> The contents of the rootsbin.list file is:
> >>
> >> roottree/sbin/arp
> >> roottree/sbin/ash
> >> roottree/sbin/awk
> >> roottree/sbin/badblocks
> >> roottree/sbin/basename
> >> roottree/sbin/bash
> >> roottree/sbin/bunzip2
> >> roottree/sbin/bzip2
> >> roottree/sbin/cat
> >> roottree/sbin/cdrecord
> >> roottree/sbin/chattr
> >> roottree/sbin/chgrp
> >> roottree/sbin/chkconfig
> >> roottree/sbin/chmod
> >> roottree/sbin/chown
> >> roottree/sbin/chroot
> >> roottree/sbin/clear
> >> roottree/sbin/consoletype
> >> roottree/sbin/cp
> >> roottree/sbin/cut
> >> roottree/sbin/date
> >> roottree/sbin/dd
> >> roottree/sbin/debugfs
> >> roottree/sbin/df
> >> roottree/sbin/dhclient
> >> roottree/sbin/dhcpd
> >> roottree/sbin/diff
> >> roottree/sbin/dig
> >> roottree/sbin/dmesg
> >> roottree/sbin/dosfsck
> >> roottree/sbin/du
> >> roottree/sbin/dump
> >> roottree/sbin/e2fsck
> >> roottree/sbin/e2label
> >> roottree/sbin/egrep
> >> roottree/sbin/eject
> >> roottree/sbin/false
> >> roottree/sbin/fdisk
> >> roottree/sbin/fgrep
> >> roottree/sbin/file
> >> roottree/sbin/find
> >> roottree/sbin/findfs
> >> roottree/sbin/free
> >> roottree/sbin/fsck
> >> roottree/sbin/fsck.cramfs
> >> roottree/sbin/fsck.ext2
> >> roottree/sbin/fsck.ext3
> >> roottree/sbin/fsck.jfs
> >> roottree/sbin/fsck.msdos
> >> roottree/sbin/fsck.vfat
> >> roottree/sbin/ftp
> >> roottree/sbin/gdb
> >> roottree/sbin/getkey
> >> roottree/sbin/grep
> >> roottree/sbin/grub
> >> roottree/sbin/grubby
> >> roottree/sbin/grub-install
> >> roottree/sbin/grub-md5-crypt
> >> roottree/sbin/grub-terminfo
> >> roottree/sbin/gunzip
> >> roottree/sbin/gzip
> >> roottree/sbin/halt
> >> roottree/sbin/hdparm
> >> roottree/sbin/head
> >> roottree/sbin/hostname
> >> roottree/sbin/hotplug
> >> roottree/sbin/id
> >> roottree/sbin/ifconfig
> >> roottree/sbin/init
> >> roottree/sbin/insmod
> >> roottree/sbin/insmod.static
> >> roottree/sbin/ipcalc
> >> roottree/sbin/kill
> >> roottree/sbin/killall
> >> roottree/sbin/killall5
> >> roottree/sbin/klogd
> >> roottree/sbin/last
> >> roottree/sbin/ldd
> >> roottree/sbin/less
> >> roottree/sbin/lilo
> >> roottree/sbin/ln
> >> roottree/sbin/loadkeys
> >> roottree/sbin/login
> >> roottree/sbin/losetup
> >> roottree/sbin/ls
> >> roottree/sbin/lsmod
> >> roottree/sbin/lsof
> >> roottree/sbin/lspci
> >> roottree/sbin/lsusb
> >> roottree/sbin/ltrace
> >> roottree/sbin/mail
> >> roottree/sbin/md5sum
> >> roottree/sbin/mgetty
> >> roottree/sbin/mingetty
> >> roottree/sbin/mkbootdisk
> >> roottree/sbin/mkdir
> >> roottree/sbin/mkdosfs
> >> roottree/sbin/mke2fs
> >> roottree/sbin/mkfs
> >> roottree/sbin/mkfs.cramfs
> >> roottree/sbin/mkfs.ext2
> >> roottree/sbin/mkfs.ext3
> >> roottree/sbin/mkfs.jfs
> >> roottree/sbin/mkfs.msdos
> >> roottree/sbin/mkfs.vfat
> >> roottree/sbin/mkinitrd
> >> roottree/sbin/mkisofs
> >> roottree/sbin/mknod
> >> roottree/sbin/mkreiserfs
> >> roottree/sbin/mkswap
> >> roottree/sbin/modinfo
> >> roottree/sbin/mktemp
> >> roottree/sbin/modprobe
> >> roottree/sbin/more
> >> roottree/sbin/mount
> >> roottree/sbin/mt
> >> roottree/sbin/mv
> >> roottree/sbin/nash
> >> roottree/sbin/netstat
> >> roottree/sbin/nice
> >> roottree/sbin/nm
> >> roottree/sbin/nmap
> >> roottree/sbin/nologin
> >> roottree/sbin/od
> >> roottree/sbin/parted
> >> roottree/sbin/passwd
> >> roottree/sbin/ping
> >> roottree/sbin/portmap
> >> roottree/sbin/printenv
> >> roottree/sbin/ps
> >> roottree/sbin/pwd
> >> roottree/sbin/raidstart
> >> roottree/sbin/reboot
> >> roottree/sbin/reiserfsck
> >> roottree/sbin/rm
> >> roottree/sbin/rmt
> >> roottree/sbin/rmdir
> >> roottree/sbin/rmmod
> >> roottree/sbin/route
> >> roottree/sbin/rpc.lockd
> >> roottree/sbin/rpc.statd
> >> roottree/sbin/runlevel
> >> roottree/sbin/scp
> >> roottree/sbin/script
> >> roottree/sbin/scsi_info
> >> roottree/sbin/sfdisk
> >> roottree/sbin/sh
> >> roottree/sbin/shutdown
> >> roottree/sbin/sleep
> >> roottree/sbin/sort
> >> roottree/sbin/ssh
> >> roottree/sbin/ssh-keygen
> >> roottree/sbin/strace
> >> roottree/sbin/strings
> >> roottree/sbin/stty
> >> roottree/sbin/su
> >> roottree/sbin/swapoff
> >> roottree/sbin/swapon
> >> roottree/sbin/sync
> >> roottree/sbin/sysctl
> >> roottree/sbin/syslogd
> >> roottree/sbin/tail
> >> roottree/sbin/tar
> >> roottree/sbin/telinit
> >> roottree/sbin/test
> >> roottree/sbin/top
> >> roottree/sbin/touch
> >> roottree/sbin/tput
> >> roottree/sbin/true
> >> roottree/sbin/tune2fs
> >> roottree/sbin/udev
> >> roottree/sbin/udevstart
> >> roottree/sbin/umount
> >> roottree/sbin/uname
> >> roottree/sbin/usleep
> >> roottree/sbin/vi
> >> roottree/sbin/w
> >> roottree/sbin/which
> >> roottree/sbin/who
> >> roottree/sbin/whoami
> >> roottree/sbin/zcat
> >>
> >> In the roottree directory sh is symlinked to bash and bash is included
> >> there.
> >>
> >> >From what I can see, the rescue cd should allow me to log in, but as
> >> >From what I can see, the rescue cd should allow me to log in, but as
> >>
> >> stated above it always returns the login incorrect after entering root.
> >> Are there any other configuration files that I need to proivde copies
> >> of,
> >> in order for further assistance into this annoying error? I really
> >> would
> >> like to get this working, as it is, or at least seems to be the last
> >> hurdel to cross.
> >>
> >> Regards,
> >>
> >> Christopher Gregory
> >>
> >> > On Tuesday 20 June 2006 06:47, Christopher wrote:
> >> >> Hello all,
> >> >>
> >> >> I am running fedora core 5 and after creating the recovery cd, when I
> >>
> >> go
> >>
> >> >> to test it on another computer ( I do not want to test it on the
> >>
> >> actual
> >>
> >> >> server that I have backed up till I know it works) I am unable to
> >> >> actually
> >> >> logon.
> >> >>
> >> >> After selecting the first option, which is meant to allow you to
> >>
> >> login,
> >>
> >> >> start network, make any changes etc, it will not go past the login.
> >> >> Entering root as the username and then pressing enter returns login
> >> >> incorrect. It never gets to the actual password prompt. I have
> >> >> compared
> >> >> passwd and shadow with the files on the server and they are, or at
> >>
> >> least
> >>
> >> >> appear to be identical.
> >> >>
> >> >> This has been compiled from source, and not via a rpm, as is the case
> >> >> with
> >> >> bacula itself.
> >> >>
> >> >> What do I need to change to allow me to actually log in?
> >> >
> >> > Well I suspect that you might be using something other than /bin/sh
> >>
> >> for
> >>
> >> > your
> >> > root shell. If that is the case, (as the manual states) you must
> >>
> >> ensure
> >>
> >> > that
> >> > your shell is in the listed binaries.
> >> >
> >> >> Regards,
> >> >>
> >> >> Christopher Gregory
> >> >
> >> > --
> >> > Best regards,
> >> >
> >> > Kern
> >> >
> >> > (">
> >> > /\
> >> > V_V
> >
> > --
> > Best regards,
> >
> > Kern
> >
> > (">
> > /\
> > V_V
> >
> > Using Tomcat but need to do more? Need to support web services, security?
> > Get stuff done quickly with pre-integrated technology to make your job
> > easier
> > Download IBM WebSphere Application Server v.1.0.1 based on Apache
> > Geronimo
> > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> > _______________________________________________
> > Bacula-users mailing list
> > Bacula-users@lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/bacula-users
--
Best regards,
Kern
(">
/\
V_V
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
