I thing you are using the wrong module. You are using aic79xx and I think you should use aic7xxx.
Jaime Ventura [Infra-estruturas e Comunicações] Rua Dr. António Bernardino de Almeida, 431 4200 - 072 Porto Telef: +351 22 834 05 00 (04) - ext. 1641 Fax: +351 22 832 11 59 e-mail: [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> url: www.isep.ipp.pt <http://www.isep.ipp.pt> Jaime Ventura wrote: > Did RHEL correctly detected you scsi board or did you changed the > /etc/modprobe.conf? > Which kernel version are you using? > > > > > > > > Jaime Ventura > [Infra-estruturas e Comunicações] > > Rua Dr. António Bernardino de Almeida, 431 > 4200 - 072 Porto > Telef: +351 22 834 05 00 (04) - ext. 1641 > Fax: +351 22 832 11 59 > > e-mail: [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> > url: www.isep.ipp.pt <http://www.isep.ipp.pt> > > > > > > > > Janco van der Merwe wrote: > >> According to the Hardware browser the PV-124T is located on /dev/sg3 but >> there is no sg3 under /dev..........well there is no sg and when I try to >> access /dev/sg3 it just says no such device any ideas? >> >> When I ls /proc/scsi I get the following: >> >> aic79xx/ device_info scsi >> >> Janco v.d Merwe >> Network Administrator >> Dunns Stores (PTY) Ltd >> Switchboard: 011 541 3000 >> Direct: 011 541 3007 >> Fax: 086 632 1708 >> >> -----Original Message----- >> From: Jaime Ventura [mailto:[EMAIL PROTECTED] >> Sent: 12 September, 2006 16:58 >> To: Janco van der Merwe;Bacula Users >> Subject: Re: [Bacula-users] Autoloaders >> >> weird...:P >> do you have graphic interface? >> run the "harware browser" (hwbroswer on the command line) >> take a look on a screenshot I send as attachment. >> You should see you tape loader under the "system devices". As you ca >> seen in the picture mine is on /dev/sg5. >> If doesn't work or if you don't have access to the "harware browser" let >> me see what you have on /proc/scsi (ls /proc/scsi ) >> >> >> >> >> >> >> >> Jaime Ventura >> [Infra-estruturas e Comunicações] >> >> Rua Dr. António Bernardino de Almeida, 431 >> 4200 - 072 Porto >> Telef: +351 22 834 05 00 (04) - ext. 1641 >> Fax: +351 22 832 11 59 >> >> e-mail: [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> >> url: www.isep.ipp.pt <http://www.isep.ipp.pt> >> >> >> >> >> >> >> >> Janco van der Merwe wrote: >> >> >>> When I run the script the following error occurs: >>> >>> /dev/sg* >>> cannot open SCSI device '/dev/sg*' - No such file or directory >>> ------------------ >>> >>> In the /proc/scsi/scsi : >>> >>> Host: scsi0 Channel: 00 Id: 08 Lun: 00 >>> Vendor: DP Model: BACKPLANE Rev: 1.00 >>> Type: Enclosure ANSI SCSI revision: 05 >>> Host: scsi0 Channel: 02 Id: 00 Lun: 00 >>> Vendor: DELL Model: PERC 5/i Rev: 1.00 >>> Type: Direct-Access ANSI SCSI revision: 05 >>> Host: scsi1 Channel: 00 Id: 05 Lun: 00 >>> Vendor: IBM Model: ULTRIUM-TD3 Rev: 5BG2 >>> Type: Sequential-Access ANSI SCSI revision: 03 >>> Host: scsi1 Channel: 00 Id: 05 Lun: 01 >>> Vendor: DELL Model: PV-124T Rev: 0031 >>> Type: Medium Changer ANSI SCSI revision: 02 >>> >>> The board is a Adaptec 39160 >>> >>> Janco v.d Merwe >>> Network Administrator >>> Dunns Stores (PTY) Ltd >>> Switchboard: 011 541 3000 >>> Direct: 011 541 3007 >>> Fax: 086 632 1708 >>> >>> -----Original Message----- >>> From: Jaime Ventura [mailto:[EMAIL PROTECTED] >>> Sent: 12 September, 2006 15:26 >>> To: Janco van der Merwe;Bacula Users >>> Subject: Re: [Bacula-users] Autoloaders >>> >>> First you need to be sure that you have the PV-124T correctly connected. >>> I bought my PV-124T with a adaptec board scsi with it. >>> First be sure that the board is recognized by linux. >>> >>> I didn't understand you message quite well. Does your cat >>> /proc/scsi/scsi is something like this? >>> Attached devices: >>> Host: scsi0 Channel: 00 Id: 06 Lun: 00 >>> Vendor: PE/PV Model: 1x2 SCSI BP Rev: 1.0 >>> Type: Processor ANSI SCSI revision: 02 >>> Host: scsi0 Channel: 01 Id: 06 Lun: 00 >>> Vendor: PE/PV Model: 1x4 SCSI BP Rev: 1.0 >>> Type: Processor ANSI SCSI revision: 02 >>> Host: scsi0 Channel: 02 Id: 00 Lun: 00 >>> Vendor: MegaRAID Model: LD 0 RAID1 69G Rev: 521S >>> Type: Direct-Access ANSI SCSI revision: 02 >>> Host: scsi0 Channel: 02 Id: 01 Lun: 00 >>> Vendor: MegaRAID Model: LD 1 RAID1 286G Rev: 521S >>> Type: Direct-Access ANSI SCSI revision: 02 >>> Host: scsi2 Channel: 00 Id: 15 Lun: 00 >>> Vendor: IBM Model: ULTRIUM-TD3 Rev: 5BG2 >>> Type: Sequential-Access ANSI SCSI revision: 03 >>> Host: scsi2 Channel: 00 Id: 15 Lun: 01 >>> Vendor: DELL Model: PV-124T Rev: 0031 >>> Type: Medium Changer ANSI SCSI revision: 02 >>> >>> >>> Notice the 2 last scsi hosts. >>> If you can get this, then your loader is correctly recognized. And If >>> so, you can run the code i sent you on my previous message, in a bash >>> console. >>> >>> If not, then probably the tapeloader isn't correctly recognized. >>> What scsi board is your tapeloader connected to? >>> >>> Tell me what you got. >>> >>> >>> >>> >>> >>> >>> >>> >>> Jaime Ventura >>> [Infra-estruturas e Comunicações] >>> >>> Rua Dr. António Bernardino de Almeida, 431 >>> 4200 - 072 Porto >>> Telef: +351 22 834 05 00 (04) - ext. 1641 >>> Fax: +351 22 832 11 59 >>> >>> e-mail: [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> >>> url: www.isep.ipp.pt <http://www.isep.ipp.pt> >>> >>> >>> >>> >>> >>> >>> >>> Janco van der Merwe wrote: >>> >>> >>> >>>> If I cat /proc/scsi/scsi the dell has an entry for the PV-124T but there >>>> is no /dev/sg* >>>> >>>> Janco v.d Merwe >>>> Network Administrator >>>> Dunns Stores (PTY) Ltd >>>> Switchboard: 011 541 3000 >>>> Direct: 011 541 3007 >>>> Fax: 086 632 1708 >>>> >>>> -----Original Message----- >>>> From: Jaime Ventura [mailto:[EMAIL PROTECTED] >>>> Sent: 12 September, 2006 14:36 >>>> To: Janco van der Merwe >>>> Cc: Bacula-users@lists.sourceforge.net >>>> Subject: Re: [Bacula-users] Autoloaders >>>> >>>> Hi, Janco >>>> Try this: >>>> >>>> #!/bin/sh >>>> (for i in /dev/sg*; do >>>> echo $i; >>>> mtx -f $i inquiry 2>&1; >>>> echo ------------------; >>>> done) \ >>>> | less >>>> >>>> Assuming is connected correctly, this will give you which /dev/sg* is >>>> you loader in. >>>> search in the results something like this: >>>> >>>> /dev/sg5 >>>> Product Type: Medium Changer >>>> Vendor ID: 'DELL ' >>>> Product ID: 'PV-124T ' >>>> Revision: '0031' >>>> Attached Changer: No >>>> >>>> >>>> Mine is on /dev/sg5, Yours may not. >>>> If you get this, tell me. I can help you with the rest. >>>> >>>> I have also a 124T on a rhel. >>>> >>>> Jaime >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> Jaime Ventura >>>> [Infra-estruturas e Comunicações] >>>> >>>> Rua Dr. António Bernardino de Almeida, 431 >>>> 4200 - 072 Porto >>>> Telef: +351 22 834 05 00 (04) - ext. 1641 >>>> Fax: +351 22 832 11 59 >>>> >>>> e-mail: [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> >>>> url: www.isep.ipp.pt <http://www.isep.ipp.pt> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> Janco van der Merwe wrote: >>>> >>>> >>>> >>>> >>>>> Hi, >>>>> >>>>> I’m going to ask a really dumb question now, so please bear with me. >>>>> We just bought a Dell Power Vault 124 with a LTO 3 now the problem is >>>>> that I don’t know what device the autoloader is specified in /dev. >>>>> >>>>> I have a nst0, nst0a, nst0l, nst0m as well as st0, st0a, st0l and >>>>> st0m. At least I know what the difference between nst0 and st0 is but >>>>> I don’t know which one of the rest is the autoloader ??????? >>>>> >>>>> The best thing is I just got to grips with Bacula and the AIT and now >>>>> I have to do everything over again but this time on RHEL 4 and the >>>>> Dell Autoloader, at least Bacula is easy but the hardware through a >>>>> curve ball. >>>>> >>>>> HELP??????? >>>>> >>>>> Janco v.d Merwe >>>>> Network Administrator >>>>> Dunns Stores (PTY) Ltd >>>>> Switchboard: 011 541 3000 >>>>> Direct: 011 541 3007 >>>>> Fax: 086 632 1708 >>>>> >>>>> >>>>> >>>>> ------------------------------------------------------------------------ >>>>> ____________________________________________________________________________ >>>>> This communication and any attachments are confidential and intended >>>>> for the sole use of the >>>>> intended recipient. Any form of copying or disclosure of this >>>>> communication to any third parties >>>>> without permission is prohibited. The contents of this communication >>>>> and its attachments are >>>>> not intended to be relied upon in law without subsequent written >>>>> confirmation. As such, Dunns >>>>> Stores (Pty) Ltd accept no responsibility or liability (including >>>>> negligence) for the consequences >>>>> of anyone acting, or not acting, on information contained therein. >>>>> >>>>> If you have received this communication in error please notify us >>>>> immediately and destroy or >>>>> delete it. >>>>> ____________________________________________________________________________ >>>>> >>>>> >>>>> ------------------------------------------------------------------------ >>>>> >>>>> ------------------------------------------------------------------------- >>>>> Using Tomcat but need to do more? Need to support web services, security? >>>>> Get stuff done quickly with pre-integrated technology to make your job >>>>> easier >>>>> Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo >>>>> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 >>>>> ------------------------------------------------------------------------ >>>>> >>>>> _______________________________________________ >>>>> Bacula-users mailing list >>>>> Bacula-users@lists.sourceforge.net >>>>> https://lists.sourceforge.net/lists/listinfo/bacula-users >>>>> >>>>> >>>>> >>>>> >>>>> >>>> ____________________________________________________________________________ >>>> This communication and any attachments are confidential and intended for >>>> the sole use of the >>>> intended recipient. Any form of copying or disclosure of this >>>> communication to any third parties >>>> without permission is prohibited. The contents of this communication and >>>> its attachments are >>>> not intended to be relied upon in law without subsequent written >>>> confirmation. As such, Dunns >>>> Stores (Pty) Ltd accept no responsibility or liability (including >>>> negligence) for the consequences >>>> of anyone acting, or not acting, on information contained therein. >>>> >>>> If you have received this communication in error please notify us >>>> immediately and destroy or >>>> delete it. >>>> ____________________________________________________________________________ >>>> >>>> >>>> >>>> >>>> >>> ____________________________________________________________________________ >>> This communication and any attachments are confidential and intended for >>> the sole use of the >>> intended recipient. Any form of copying or disclosure of this >>> communication to any third parties >>> without permission is prohibited. The contents of this communication and >>> its attachments are >>> not intended to be relied upon in law without subsequent written >>> confirmation. As such, Dunns >>> Stores (Pty) Ltd accept no responsibility or liability (including >>> negligence) for the consequences >>> of anyone acting, or not acting, on information contained therein. >>> >>> If you have received this communication in error please notify us >>> immediately and destroy or >>> delete it. >>> ____________________________________________________________________________ >>> >>> >>> >>> >> >> ____________________________________________________________________________ >> This communication and any attachments are confidential and intended for the >> sole use of the >> intended recipient. Any form of copying or disclosure of this communication >> to any third parties >> without permission is prohibited. The contents of this communication and >> its attachments are >> not intended to be relied upon in law without subsequent written >> confirmation. As such, Dunns >> Stores (Pty) Ltd accept no responsibility or liability (including >> negligence) for the consequences >> of anyone acting, or not acting, on information contained therein. >> >> If you have received this communication in error please notify us >> immediately and destroy or >> delete it. >> ____________________________________________________________________________ >> >> >> >> > > ------------------------------------------------------------------------- > Using Tomcat but need to do more? Need to support web services, security? > Get stuff done quickly with pre-integrated technology to make your job easier > Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 > _______________________________________________ > Bacula-users mailing list > Bacula-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/bacula-users > ------------------------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
