On Monday 02 October 2006 10:33, Jürgen Heil wrote:
> Bacula doesn't mount our tapes automatically before running the job. It
> always gives us following message:
[...]
> Device {
> Name = QTapeStorage
> Media Type = VXA
> Archive Device = /dev/nst0
> LabelMedia = yes;
> AutomaticMount = yes;
> AlwaysOpen = no;
> }
Perhaps you need polling? Try setting "Volume Poll Interval". The
following works for me:
AutomaticMount = yes
Volume Poll Interval = 5 minutes
AlwaysOpen = yes
Offline on Unmount = yes
Close on Poll = yes
This also makes bacula eject tapes when it wants a new one. Careful -
AlwaysOpen means that you MUST NOT eject the tape manually, even if
the drive does allow it (mine does) - umount the tape from bacula
(console) instead.
If you run backups late in the evening, you'll probably want to change
tapes before that. To avoid manual intervention, run a small dummy job
to the same tape earlier.
Btw: I'm using 1.39.22. If you have < 1.38, better upgrade.
MfG, Ulrich
--
Heinz Ulrich Stille / Tel.: +49-541-9400473 / Fax: +49-541-9400450
design_d gmbh / Wilhelmstr. 16 / 49076 Osnabrück / www.design-d.de
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bacula-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-users
