On Wednesday 06 December 2006 04:29, Ian Levesque wrote: > Does anybody have any ideas? Even a "me too" would help at this > point, if only to determine if a common configuration issue can be > narrowed down... > > On Dec 4, 2006, at 10:40 PM, Ian Levesque wrote: > > > Hi folks, > > > > After a few Full jobs just failed, I noticed something that I thought > > had disappeared a few months ago, but I'm seeing a problem where > > Bacula's storage daemon knows there are jobs running on a drive, but > > its "In Use Volume" status doesn't show the drive as in-use. As a > > result, it appears, other jobs are trying to utilize the drive and > > failing, because the drive is using a volume from another pool. > > Running bacula-sd version 1.39.28 on Linux.
There have been such reports from time to time, but to date, no one has given me a repeatable test showing the failure. When the SD is in such a state, it might be useful to turn on some level of debug (you will need to experiment) if the trace output clearly shows the problem, maybe I can fix it. Otherwise, I need a test case. What is most important is to know how (i.e. what steps caused it) it got into a state where a Volume is mounted but it is not in the In Use Volumes list. > > > > Here's an example of the error: > > > > 04-Dec 22:25 sbgrid-dir: Start Backup JobId 773, Job=ROUTER. > > 2006-12-04_22.25.00 > > 04-Dec 22:25 sbgrid-sd: ROUTER.2006-12-04_22.25.00 Fatal error: > > acquire.c:336 Wanted Volume "000074L2", but device "LTO2B" (/dev/ > > nst1) is busy writing on "000001L2" . > > 04-Dec 21:42 router-fd: ROUTER.2006-12-04_22.25.00 Fatal error: job.c: > > 1617 Bad response to Append Data command. Wanted 3000 OK data, got > > 3903 Error append data > > > > And below is the gist of what "status sd" gives me (note the In Use > > Volume status at the bottom). If anybody has seen this, or even may > > have an answer to the problem, please let me know. > > > > Thanks, > > Ian > > > > > > status sd: > > > > Running Jobs: > > Writing: Full Backup job CRYSTAL_HOME JobId=767 Volume="000072L2" > > pool="Fulls" device=""LTO2A" (/dev/nst0)" > > Files=129,025 Bytes=20,796,051,130 Bytes/sec=9,376,037 > > FDReadSeqNo=1,337,690 in_msg=992115 out_msg=5 fd=4 > > Writing: Incremental Backup job EML5 JobId=768 Volume="000001L2" > > pool="Incrementals" device=""LTO2B" (/dev/nst1)" > > Files=3,189 Bytes=27,656,851,628 Bytes/sec=11,758,865 > > FDReadSeqNo=448,013 in_msg=439191 out_msg=5 fd=8 > > Writing: Full Backup job FS3_PROGRAMS JobId=770 Volume="000073L2" > > pool="Fulls" device=""LTO2C" (/dev/nst2)" > > Files=217,491 Bytes=15,090,657,761 Bytes/sec=8,613,389 > > FDReadSeqNo=2,073,024 in_msg=1449408 out_msg=5 fd=13 > > Writing: Full Backup job EML1 JobId=772 Volume="000072L2" > > pool="Fulls" device=""LTO2A" (/dev/nst0)" > > Files=2,933 Bytes=17,491,333,191 Bytes/sec=15,196,640 > > FDReadSeqNo=290,178 in_msg=282297 out_msg=5 fd=16 > > ==== > > > > ... > > > > Device status: > > Autochanger "ADIC Scalar 100" with devices: > > "LTO2A" (/dev/nst0) > > "LTO2B" (/dev/nst1) > > "LTO2C" (/dev/nst2) > > Device "FileStorage" (/tmp) is not open. > > Device "LTO2A" (/dev/nst0) is mounted with Volume="000072L2" > > Pool="Fulls" > > Slot 34 is loaded in drive 0. > > Total Bytes=169,559,756,119 Blocks=2,628,347 Bytes/block=64,511 > > Positioned at File=174 Block=4,996 > > Device "LTO2B" (/dev/nst1) is mounted with Volume="000001L2" > > Pool="Incrementals" > > Slot 1 is loaded in drive 1. > > Total Bytes=10,137,415,680 Blocks=157,139 Bytes/block=64,512 > > Positioned at File=12 Block=1,748 > > Device "LTO2C" (/dev/nst2) is mounted with Volume="000073L2" > > Pool="Fulls" > > Slot 35 is loaded in drive 2. > > Total Bytes=15,186,447,360 Blocks=235,404 Bytes/block=64,512 > > Positioned at File=17 Block=1,704 > > ==== > > > > In Use Volume status: > > 000072L2 on device "LTO2A" (/dev/nst0) > > 000073L2 on device "LTO2C" (/dev/nst2) > > ==== > > > > > > ---------------------------------------------------------------------- > > --- > > Take Surveys. Earn Cash. Influence the Future of IT > > Join SourceForge.net's Techsay panel and you'll get the chance to > > share your > > opinions on IT & business topics through brief surveys - and earn cash > > http://www.techsay.com/default.php? > > page=join.php&p=sourceforge&CID=DEVDEV > > _______________________________________________ > > Bacula-users mailing list > > Bacula-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/bacula-users > > > ------------------------------------------------------------------------- > Take Surveys. Earn Cash. Influence the Future of IT > Join SourceForge.net's Techsay panel and you'll get the chance to share your > opinions on IT & business topics through brief surveys - and earn cash > http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV > _______________________________________________ > Bacula-users mailing list > Bacula-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/bacula-users > ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
