Hi All, I received "ERR=Input/output error" upon executing "label barcodes". However, "update slots" was successful. Any ideas? Verbose bconsole output provided below:
Connecting to Storage daemon Tape at uwharrie:9103 ... Sending label command for Volume "MSR100L3" Slot 1 ... 3301 Issuing autochanger "loaded? drive 0" command. 3302 Autochanger "loaded? drive 0", result: nothing loaded. 3304 Issuing autochanger "load slot 1, drive 0" command. 3305 Autochanger "load slot 1, drive 0", status is OK. 3301 Issuing autochanger "loaded? drive 0" command. 3302 Autochanger "loaded? drive 0", result is Slot 1. block.c:994 Read error on fd=5 at file:blk 0:0 on device "Drive-1" (/dev/nst0). ERR=Input/output error. 3000 OK label. VolBytes=64512 DVD=0 Volume="MSR100L3" Device="Drive-1" (/dev/nst0) Catalog record for Volume "MSR100L3", Slot 1 successfully created. Specs: Dell PE 2650 RHEL 4 AS Quantum PX502 Autochanger (1 drive, LTO-3, FC, barcode reader) Bacula 2.0.1 (via rpm) Regards, Mike ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
