-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
This is why asking good questions are important.
You do not have a /lib/libacl.so.1 because you likely have a
/lib64/libacl.so.1 -- you are no doubt using 32-bit Bacula RPM's that
rely on libraries you won't have. I see that on my 64-bit system I have
a 32-bit Bacula RPM hanging around, but it's not the one I installed so
it may just be there by mistake.
At any rate, the package I currently run is maintainted by Felix Schwarz
and is available at the archive page.
Jason King wrote:
> Yes, x86_64 indeed.
>
> Ryan Novosielski wrote:
> Wait a second... is this machine x86_64 by any chance (notice you also
> did not include that in your original question)?
>
> Jason King wrote:
>
>>>> Alright I'm out of ideas. I don't know how to install the libraries
>>>> this thing needs. I've tried copying to every director the strace
>>>> says it looking for and I'm still not working. On the GOOD news...I'm
>>>> not getting a Seg Fault anymore. Now it says
>>>> "bacula-fd: error while loading shared libraries: libacl.so.1: cannot
>>>> open shared object file: No such file or directory"
>>>>
>>>> I've run the program with strace and found all the instances where
>>>> it's looking for libacl.so.1 and copied them all over to it. I cannot
>>>> get this thing to work. I don't know what to do now. Here is my
>>>> strace output:
>>>>
>>>> [EMAIL PROTECTED] tls]# bacula-fd
>>>> bacula-fd: error while loading shared libraries: libacl.so.1: cannot
>>>> open shared object file: No such file or directory
>>>> [EMAIL PROTECTED] tls]# strace bacula-fd -f -d 500
>>>> execve("/usr/sbin/bacula-fd", ["bacula-fd", "-f", "-d", "500"], [/*
>>>> 23 vars */]) = 0
>>>> [ Process PID=1927 runs in 32 bit mode. ]
>>>> uname({sys="Linux", node="lovelace.informs.com", ...}) = 0
>>>> brk(0) = 0x8147000
>>>> access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or
>>>> directory)
>>>> open("/etc/ld.so.cache", O_RDONLY) = 3
>>>> fstat64(0x3, 0xffffcf6c) = 0
>>>> old_mmap(NULL, 77355, PROT_READ, MAP_PRIVATE, 3, 0) = 0xfffffffff7feb000
>>>> close(3) = 0
>>>> open("/lib/tls/i686/sse2/libacl.so.1", O_RDONLY) = -1 ENOENT (No such
>>>> file or directory)
>>>> stat64(0xffffcf90, 0xffffd000) = -1 ENOENT (No such file or
>>>> directory)
>>>> open("/lib/tls/i686/libacl.so.1", O_RDONLY) = -1 ENOENT (No such file
>>>> or directory)
>>>> stat64(0xffffcf90, 0xffffd000) = -1 ENOENT (No such file or
>>>> directory)
>>>> open("/lib/tls/sse2/libacl.so.1", O_RDONLY) = -1 ENOENT (No such file
>>>> or directory)
>>>> stat64(0xffffcf90, 0xffffd000) = -1 ENOENT (No such file or
>>>> directory)
>>>> open("/lib/tls/libacl.so.1", O_RDONLY) = 3
>>>> read(3,
>>>> "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\220\31\200"..., 512)
>>>> = 512
>>>> close(3) = 0
>>>> stat64(0xffffcf90, 0xffffd000) = 0
>>>> open("/lib/i686/sse2/libacl.so.1", O_RDONLY) = -1 ENOENT (No such
>>>> file or directory)
>>>> stat64(0xffffcf90, 0xffffd000) = -1 ENOENT (No such file or
>>>> directory)
>>>> open("/lib/i686/libacl.so.1", O_RDONLY) = -1 ENOENT (No such file or
>>>> directory)
>>>> stat64(0xffffcf90, 0xffffd000) = 0
>>>> open("/lib/sse2/libacl.so.1", O_RDONLY) = -1 ENOENT (No such file or
>>>> directory)
>>>> stat64(0xffffcf90, 0xffffd000) = -1 ENOENT (No such file or
>>>> directory)
>>>> open("/lib/libacl.so.1", O_RDONLY) = 3
>>>> read(3,
>>>> "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\220\31\200"..., 512)
>>>> = 512
>>>> close(3) = 0
>>>> stat64(0xffffcf90, 0xffffd000) = 0
>>>> open("/usr/lib/tls/i686/sse2/libacl.so.1", O_RDONLY) = -1 ENOENT (No
>>>> such file or directory)
>>>> stat64(0xffffcf90, 0xffffd000) = -1 ENOENT (No such file or
>>>> directory)
>>>> open("/usr/lib/tls/i686/libacl.so.1", O_RDONLY) = -1 ENOENT (No such
>>>> file or directory)
>>>> stat64(0xffffcf90, 0xffffd000) = -1 ENOENT (No such file or
>>>> directory)
>>>> open("/usr/lib/tls/sse2/libacl.so.1", O_RDONLY) = -1 ENOENT (No such
>>>> file or directory)
>>>> stat64(0xffffcf90, 0xffffd000) = -1 ENOENT (No such file or
>>>> directory)
>>>> open("/usr/lib/tls/libacl.so.1", O_RDONLY) = -1 ENOENT (No such file
>>>> or directory)
>>>> stat64(0xffffcf90, 0xffffd000) = -1 ENOENT (No such file or
>>>> directory)
>>>> open("/usr/lib/i686/sse2/libacl.so.1", O_RDONLY) = -1 ENOENT (No such
>>>> file or directory)
>>>> stat64(0xffffcf90, 0xffffd000) = -1 ENOENT (No such file or
>>>> directory)
>>>> open("/usr/lib/i686/libacl.so.1", O_RDONLY) = -1 ENOENT (No such file
>>>> or directory)
>>>> stat64(0xffffcf90, 0xffffd000) = -1 ENOENT (No such file or
>>>> directory)
>>>> open("/usr/lib/sse2/libacl.so.1", O_RDONLY) = -1 ENOENT (No such file
>>>> or directory)
>>>> stat64(0xffffcf90, 0xffffd000) = -1 ENOENT (No such file or
>>>> directory)
>>>> open("/usr/lib/libacl.so.1", O_RDONLY) = 3
>>>> read(3,
>>>> "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\220\31\200"..., 512)
>>>> = 512
>>>> close(3) = 0
>>>> stat64(0xffffcf90, 0xffffd000) = 0
>>>> writev(2, [{ptrace: umoven: Input/output error
>>>> 0x9ffffdbbb, 8596612869}, {ptrace: umoven: Input/output error
>>>> 0x240065fa08, 8596612873}, {ptrace: umoven: Input/output error
>>>> 0xb00661def, 8596612864}, {ptrace: umoven: Input/output error
>>>> 0x1e00661dd0, 8596612864}, {ptrace: umoven: Input/output error
>>>> 0x190065e91d, 4301645589}, {NULL, 0}, {NULL, 0}, {NULL, 0}, {NULL,
>>>> 0}, {NULL, 0}], 10bacula-fd: error while loading shared libraries:
>>>> libacl.so.1: cannot open shared object file: No such file or directory
>>>> ) = 120
>>>> exit_group(127) = ?
>>>> Process 1927 detached
>>>>
>>>>
>>>>
>>>> Ryan Novosielski wrote:
>>>> I wouldn't personally do either one of those things (though they are one
>>>> answer).
>>>>
>>>> You really need to know where those files are supposed to be and install
>>>> those packages from that version of RHEL. All that stuff is definitely
>>>> available if bacula is to ever run on RHEL. If you mix and match
>>>> distribution numbers, you're asking for trouble. I occasionally do the
>>>> same myself, but not for anything more important than movie players or
>>>> desktop software.
>>>>
>>>> Again, I think I've personally asked you for this already, if you want
>>>> decent help, provide decent information. When in doubt, if your original
>>>> request for help fits in an SMS, you've messed up.
>>>>
>>>> RHEL4.1 and RHEL4.4 are not even that similar as pertains to version
>>>> numbers. I have 4.3, if I'm not mistaken, and have /lib64/libssl.so.4 --
>>>> however, this file is not owned by any package, according to rpm. If you
>>>> don't have it, I'd be concerned.
>>>>
>>>> Per Andreas Buer wrote:
>>>>
>>>>>>> Hi.
>>>>>>>
>>>>>>> I would recommend that you install from source unless you have the
>>>>>>> required libraries installed for bacula - do not use --nodeps
>>>>>>> unless you know exactly what you are doing. Or you might compare
>>>>>>> the machine you've got working with this one.
>>>>>>>
>>>>>>> Per.
>>>>>>>
>>>>>>>
>>>>>>> Jason King wrote:
>>>>>>>
>>>>>>>> On another note, what packages are required to install and run
>>>>>>>> the bacula client. The RPM requires some dependencies but it is
>>>>>>>> requiring some .so.# files and I don't know what package those
>>>>>>>> libraries would be under. I've tried up2date -i bacula-client and
>>>>>>>> it isn't available. Tried the RPM and it has required library
>>>>>>>> files so I just FORCED the install by telling it --nodeps while
>>>>>>>> doing the rpm install. Then as I tried to start it the system
>>>>>>>> would say "Can't find file /lib/libssl.so.4" or whatever file it
>>>>>>>> needed. I would go get the file it needed and put it in place
>>>>>>>> then try to start it again...then it would tell me "Can't find
>>>>>>>> file /lib/libcrypto.so.4" and so on until it started working...I
>>>>>>>> did this successfully on another RHEL4 machine but this one
>>>>>>>> doesn't work for whatever reason. I think it has something to do
>>>>>>>> with the fact that I never installed the required packages except
>>>>>>>> for copying files from one place to another manually. I might
>>>>>>>> have flubbed something up while doing the manual install of the
>>>>>>>> required lib files.
>>>>>>>>
>>>>>>>> Jason
>>>>>>>>
>>>>>>>> Jason King wrote:
>>>>>>>>
>>>>>>>>> Ok, here you go:
>>>>>>>>>
>>>>>>>>> Jason
>>>>>>>>>
>>>>>>>>> Aaron Knister wrote:
>>>>>>>>>
>>>>>>>>>> Try this-
>>>>>>>>>>
>>>>>>>>>> strace bacula-fd -f -d 500 2>&1 | tee log.out
>>>>>>>>>>
>>>>>>>>>> Then post log.out
>>>>>>>>>>
>>>>>>>>>> -Aaron
>>>>>>>>>>
>>>>>>>>>> Jason King wrote:
>>>>>>>>>>
>>>>>>>>>>> Here is the output:
>>>>>>>>>>>
>>>>>>>>>>> [EMAIL PROTECTED] ~]# bacula-fd -f -d 500
>>>>>>>>>>> Segmentation fault
>>>>>>>>>>> [EMAIL PROTECTED] ~]#
>>>>>>>>>>>
>>>>>>>>>>> Not very helpful huh?
>>>>>>>>>>>
>>>>>>>>>>> Jason
>>>>>>>>>>>
>>>>>>>>>>> Per Andreas Buer wrote:
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>> Jason King wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>> I'm trying to run the bacula-client on my RHEL box. I have
>>>>>>>>>>>>> it running correctly on another RHEL box but on another one
>>>>>>>>>>>>> it doesn't work. When I try and start the FD I get a simple
>>>>>>>>>>>>> message "Segmentation Fault".
>>>>>>>>>>>>>
>>>>>>>>>>>> Could you start it with "bacula-fd -f -d 500" and post the
>>>>>>>>>>>> output here?
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> Per.
>>>>>>>>>>>>
>>>>>>>>>>> -------------------------------------------------------------------------
>>>>>>>>>>>
>>>>>>>>>>> Take Surveys. Earn Cash. Influence the Future of IT
>>>>>>>>>>> Join SourceForge.net's Techsay panel and you'll get the chance
>>>>>>>>>>> to share your
>>>>>>>>>>> opinions on IT & business topics through brief surveys-and
>>>>>>>>>>> earn cash
>>>>>>>>>>> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
>>>>>>>>>>>
>>>>>>>>>>> _______________________________________________
>>>>>>>>>>> Bacula-users mailing list
>>>>>>>>>>> Bacula-users@lists.sourceforge.net
>>>>>>>>>>> https://lists.sourceforge.net/lists/listinfo/bacula-users
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>> ------------------------------------------------------------------------
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> execve("/usr/sbin/bacula-fd", ["bacula-fd", "-f", "-d", "500"],
>>>>>>>>> [/* 23 vars */]) = 0
>>>>>>>>> uname({sys="Linux", node="lovelace.informs.com", ...}) = 0
>>>>>>>>> brk(0) = 0x8147000
>>>>>>>>> access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such
>>>>>>>>> file or directory)
>>>>>>>>> open("/etc/ld.so.cache", O_RDONLY) = 3
>>>>>>>>> fstat64(0x3, 0xffffcf6c) = 0
>>>>>>>>> old_mmap(NULL, 77355, PROT_READ, MAP_PRIVATE, 3, 0) =
>>>>>>>>> 0xfffffffff7feb000
>>>>>>>>> close(3) = 0
>>>>>>>>> open("/lib/tls/i686/sse2/libacl.so.1", O_RDONLY) = -1 ENOENT (No
>>>>>>>>> such file or directory)
>>>>>>>>> stat64(0xffffcf90, 0xffffd000) = -1 ENOENT (No such
>>>>>>>>> file or directory)
>>>>>>>>> open("/lib/tls/i686/libacl.so.1", O_RDONLY) = -1 ENOENT (No such
>>>>>>>>> file or directory)
>>>>>>>>> stat64(0xffffcf90, 0xffffd000) = -1 ENOENT (No such
>>>>>>>>> file or directory)
>>>>>>>>> open("/lib/tls/sse2/libacl.so.1", O_RDONLY) = -1 ENOENT (No such
>>>>>>>>> file or directory)
>>>>>>>>> stat64(0xffffcf90, 0xffffd000) = -1 ENOENT (No such
>>>>>>>>> file or directory)
>>>>>>>>> open("/lib/tls/libacl.so.1", O_RDONLY) = -1 ENOENT (No such
>>>>>>>>> file or directory)
>>>>>>>>> stat64(0xffffcf90, 0xffffd000) = 0
>>>>>>>>> open("/lib/i686/sse2/libacl.so.1", O_RDONLY) = -1 ENOENT (No
>>>>>>>>> such file or directory)
>>>>>>>>> stat64(0xffffcf90, 0xffffd000) = -1 ENOENT (No such
>>>>>>>>> file or directory)
>>>>>>>>> open("/lib/i686/libacl.so.1", O_RDONLY) = -1 ENOENT (No such
>>>>>>>>> file or directory)
>>>>>>>>> stat64(0xffffcf90, 0xffffd000) = 0
>>>>>>>>> open("/lib/sse2/libacl.so.1", O_RDONLY) = -1 ENOENT (No such
>>>>>>>>> file or directory)
>>>>>>>>> stat64(0xffffcf90, 0xffffd000) = -1 ENOENT (No such
>>>>>>>>> file or directory)
>>>>>>>>> open("/lib/libacl.so.1", O_RDONLY) = 3
>>>>>>>>> read(3,
>>>>>>>>> "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\300\362"...,
>>>>>>>>> 512) = 512
>>>>>>>>> fstat64(0x3, 0xffffd000) = 0
>>>>>>>>> old_mmap(NULL, 4096, PROT_READ|PROT_WRITE,
>>>>>>>>> MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xfffffffff7fea000
>>>>>>>>> old_mmap(0xc1e000, 20948, PROT_READ|PROT_EXEC,
>>>>>>>>> MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xc1e000
>>>>>>>>> old_mmap(0xc23000, 4096, PROT_READ|PROT_WRITE,
>>>>>>>>> MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x5000) = 0xc23000
>>>>>>>>> close(3) = 0
>>>>>>>>> open("/usr/lib/libz.so.1", O_RDONLY) = 3
>>>>>>>>> read(3,
>>>>>>>>> "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\260\25"...,
>>>>>>>>> 512) = 512
>>>>>>>>> fstat64(0x3, 0xffffcfe4) = 0
>>>>>>>>> old_mmap(NULL, 65124, PROT_READ|PROT_EXEC,
>>>>>>>>> MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xfffffffff7fda000
>>>>>>>>> old_mmap(0xf7fe9000, 4096, PROT_READ|PROT_WRITE,
>>>>>>>>> MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xe000) =
>>>>>>>>> 0xfffffffff7fe9000
>>>>>>>>> close(3) = 0
>>>>>>>>> open("/lib/libutil.so.1", O_RDONLY) = 3
>>>>>>>>> read(3,
>>>>>>>>> "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\220\f\0"...,
>>>>>>>>> 512) = 512
>>>>>>>>> fstat64(0x3, 0xffffcfc8) = 0
>>>>>>>>> old_mmap(NULL, 12428, PROT_READ|PROT_EXEC,
>>>>>>>>> MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xfffffffff7fd6000
>>>>>>>>> old_mmap(0xf7fd8000, 8192, PROT_READ|PROT_WRITE,
>>>>>>>>> MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1000) =
>>>>>>>>> 0xfffffffff7fd8000
>>>>>>>>> close(3) = 0
>>>>>>>>> open("/lib/tls/librt.so.1", O_RDONLY) = 3
>>>>>>>>> read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\320
>>>>>>>>> \0"..., 512) = 512
>>>>>>>>> fstat64(0x3, 0xffffcfac) = 0
>>>>>>>>> old_mmap(NULL, 81656, PROT_READ|PROT_EXEC,
>>>>>>>>> MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xfffffffff7fc2000
>>>>>>>>> old_mmap(0xf7fca000, 8192, PROT_READ|PROT_WRITE,
>>>>>>>>> MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x7000) =
>>>>>>>>> 0xfffffffff7fca000
>>>>>>>>> old_mmap(0xf7fcc000, 40696, PROT_READ|PROT_WRITE,
>>>>>>>>> MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xfffffffff7fcc000
>>>>>>>>> close(3) = 0
>>>>>>>>> open("/lib/tls/libpthread.so.0", O_RDONLY) = 3
>>>>>>>>> read(3,
>>>>>>>>> "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0PH\0\000"...,
>>>>>>>>> 512) = 512
>>>>>>>>> fstat64(0x3, 0xffffcf90) = 0
>>>>>>>>> old_mmap(NULL, 70108, PROT_READ|PROT_EXEC,
>>>>>>>>> MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xfffffffff7fb0000
>>>>>>>>> old_mmap(0xf7fbe000, 8192, PROT_READ|PROT_WRITE,
>>>>>>>>> MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xd000) =
>>>>>>>>> 0xfffffffff7fbe000
>>>>>>>>> old_mmap(0xf7fc0000, 4572, PROT_READ|PROT_WRITE,
>>>>>>>>> MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xfffffffff7fc0000
>>>>>>>>> close(3) = 0
>>>>>>>>> open("/lib/libdl.so.2", O_RDONLY) = 3
>>>>>>>>> read(3,
>>>>>>>>> "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\260\v\0"...,
>>>>>>>>> 512) = 512
>>>>>>>>> fstat64(0x3, 0xffffcf74) = 0
>>>>>>>>> old_mmap(NULL, 12388, PROT_READ|PROT_EXEC,
>>>>>>>>> MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xfffffffff7fac000
>>>>>>>>> old_mmap(0xf7fae000, 8192, PROT_READ|PROT_WRITE,
>>>>>>>>> MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1000) =
>>>>>>>>> 0xfffffffff7fae000
>>>>>>>>> close(3) = 0
>>>>>>>>> open("/lib/tls/libssl.so.4", O_RDONLY) = -1 ENOENT (No such
>>>>>>>>> file or directory)
>>>>>>>>> open("/lib/i686/libssl.so.4", O_RDONLY) = -1 ENOENT (No such
>>>>>>>>> file or directory)
>>>>>>>>> open("/lib/libssl.so.4", O_RDONLY) = 3
>>>>>>>>> read(3,
>>>>>>>>> "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\0206\273"...,
>>>>>>>>> 512) = 512
>>>>>>>>> fstat64(0x3, 0xffffcf58) = 0
>>>>>>>>> old_mmap(NULL, 4096, PROT_READ|PROT_WRITE,
>>>>>>>>> MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xfffffffff7fab000
>>>>>>>>> old_mmap(0xbaa000, 212692, PROT_READ|PROT_EXEC,
>>>>>>>>> MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xbaa000
>>>>>>>>> old_mmap(0xbdb000, 12288, PROT_READ|PROT_WRITE,
>>>>>>>>> MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x31000) = 0xbdb000
>>>>>>>>> close(3) = 0
>>>>>>>>> open("/lib/tls/libcrypto.so.4", O_RDONLY) = -1 ENOENT (No such
>>>>>>>>> file or directory)
>>>>>>>>> open("/lib/i686/libcrypto.so.4", O_RDONLY) = -1 ENOENT (No such
>>>>>>>>> file or directory)
>>>>>>>>> open("/lib/libcrypto.so.4", O_RDONLY) = 3
>>>>>>>>> read(3,
>>>>>>>>> "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\260\273"...,
>>>>>>>>> 512) = 512
>>>>>>>>> fstat64(0x3, 0xffffcf3c) = 0
>>>>>>>>> old_mmap(0x101000, 953176, PROT_READ|PROT_EXEC,
>>>>>>>>> MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x101000
>>>>>>>>> old_mmap(0x1d5000, 73728, PROT_READ|PROT_WRITE,
>>>>>>>>> MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xd4000) = 0x1d5000
>>>>>>>>> old_mmap(0x1e7000, 11096, PROT_READ|PROT_WRITE,
>>>>>>>>> MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x1e7000
>>>>>>>>> --- SIGSEGV (Segmentation fault) @ 0 (0) ---
>>>>>>>>> +++ killed by SIGSEGV +++
>>>>>>>>> Process 32727 detached
>>>>>>>>> [ Process PID=32727 runs in 32 bit mode. ]
>>>>>>>>>
>>>>>>>>> ------------------------------------------------------------------------
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> -------------------------------------------------------------------------
>>>>>>>>>
>>>>>>>>> Take Surveys. Earn Cash. Influence the Future of IT
>>>>>>>>> Join SourceForge.net's Techsay panel and you'll get the chance
>>>>>>>>> to share your
>>>>>>>>> opinions on IT & business topics through brief surveys-and earn
>>>>>>>>> cash
>>>>>>>>> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
>>>>>>>>>
>>>>>>>>> ------------------------------------------------------------------------
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> Bacula-users mailing list
>>>>>>>>> Bacula-users@lists.sourceforge.net
>>>>>>>>> https://lists.sourceforge.net/lists/listinfo/bacula-users
>>>>>>>>>
>>>>>>> -------------------------------------------------------------------------
>>>>>>>
>>>>>>> Take Surveys. Earn Cash. Influence the Future of IT
>>>>>>> Join SourceForge.net's Techsay panel and you'll get the chance to
>>>>>>> share your
>>>>>>> opinions on IT & business topics through brief surveys-and earn cash
>>>>>>> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> Bacula-users mailing list
>>>>>>> Bacula-users@lists.sourceforge.net
>>>>>>> https://lists.sourceforge.net/lists/listinfo/bacula-users
>>>>>>>
>
>
>>>> -------------------------------------------------------------------------
>>>>
>>>> Take Surveys. Earn Cash. Influence the Future of IT
>>>> Join SourceForge.net's Techsay panel and you'll get the chance to
>>>> share your
>>>> opinions on IT & business topics through brief surveys-and earn cash
>>>> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
>>>>
>>>> _______________________________________________
>>>> Bacula-users mailing list
>>>> Bacula-users@lists.sourceforge.net
>>>> https://lists.sourceforge.net/lists/listinfo/bacula-users
>>>>
>
>>
- --
---- _ _ _ _ ___ _ _ _
|Y#| | | |\/| | \ |\ | | |Ryan Novosielski - Systems Programmer III
|$&| |__| | | |__/ | \| _| |[EMAIL PROTECTED] - 973/972.0922 (2-0922)
\__/ Univ. of Med. and Dent.|IST/AST - NJMS Medical Science Bldg - C630
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (MingW32)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iD8DBQFF1ixKmb+gadEcsb4RAt5LAJ9irwoZ/p+8S4eMMg2IDXpdYiJdfgCgwEU4
f3YHkUMPp2T0qFxk1WYHwSA=
=pfuz
-----END PGP SIGNATURE-----
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
