On Tuesday 20 February 2007 10:47, Adam Cécile wrote:
> Hi,
>
> Any suggest I could start looking at ?
1. Run the SD with debug level 100.
2. Look at doc for PreferMountedVolumes
3. Although you provided your conf files (very useful), you did not say what
version of Bacula you are using (important) nor show any of the output where
the drive is not used.
>
> Regards, Adam Cécile.
>
> Adam Cécile a écrit :
> > Hello,
> >
> > I have set up a bacula installation with a Dell 132T autochanger
> > (/dev/sg2). It has two LOT3 drives, /dev/nst0 and /dev/nst1.
> > Both drives works fine with the mtx-changer script. Currently backup are
> > done but only used drive 0. I would like to run jobs on both drive 0 and
> > 1, however when I start two jobs at the same, the first one starts and
> > the second one starts two but wait for drive 0 to become free before
> > writing.
> > Could you help me to get the second jobs, loads a tape in drive 1 and
> > starts writing on drive 1, while drive 0 is used ?
> >
> > Thanks in advance.
> >
> > PS: See some parts of my config below!
> >
> >
> >
> > Here is my storage daemon conf :
> >
> > Storage { # definition of myself
> > Name = srv-mpp-lrs-sd
> > SDPort = 9103 # Director's port
> > WorkingDirectory = "/var/lib/bacula"
> > Pid Directory = "/var/run/bacula"
> > Maximum Concurrent Jobs = 2
> > SDAddress = 0.0.0.0
> > }
> > Director {
> > Name = srv-mpp-lrs-dir
> > Password = "xxx"
> > }
> > Director {
> > Name = srv-mpp-lrs-mon
> > Password = "xxx"
> > Monitor = yes
> > }
> > # An autochanger device with two drives
> > Autochanger {
> > Name = Dell-PV132T
> > Device = ULTRIUM-TD3-1
> > Device = ULTRIUM-TD3-2
> > Changer Command = "/etc/bacula/scripts/mtx-changer %c %o %S %a %d"
> > Changer Device = /dev/sg2
> > }
> > Device {
> > Name = ULTRIUM-TD3-1
> > Drive Index = 0
> > Media Type = LTO3
> > Archive Device = /dev/nst0
> > AutomaticMount = yes; # when device opened, read it
> > AlwaysOpen = yes;
> > RemovableMedia = yes;
> > #RandomAccess = no;
> > AutoChanger = yes
> > # Enable the Alert command only if you have the mtx package loaded
> > # Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
> > }
> > Device {
> > Name = ULTRIUM-TD3-2
> > Drive Index = 1
> > Media Type = LTO3
> > Archive Device = /dev/nst1
> > AutomaticMount = yes; # when device opened, read it
> > AlwaysOpen = yes;
> > RemovableMedia = yes;
> > #RandomAccess = no;
> > AutoChanger = yes
> > # Enable the Alert command only if you have the mtx package loaded
> > # Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
> > }
> > Messages {
> > Name = Standard
> > director = srv-mpp-lrs-dir = all
> > }
> >
> >
> >
> > And some usefull parts of director conf :
> >
> > Director { # define myself
> > Name = srv-mpp-lrs-dir
> > DIRport = 9101 # where we listen for UA connections
> > QueryFile = "/etc/bacula/scripts/query.sql"
> > WorkingDirectory = "/var/lib/bacula"
> > PidDirectory = "/var/run/bacula"
> > Password = "xxx" # Console password
> > Messages = Daemon
> > DirAddress = 0.0.0.0
> > Maximum Concurrent Jobs = 2
> > }
> > # Templates pour les jobs
> > JobDefs {
> > Name = "DefaultJob"
> > Type = Backup
> > Storage = Autochanger
> > Messages = Standard
> > Client = srv-mpp-lrs-fd
> > FileSet = "Full Set"
> > Priority = 5
> > # Do not wait more than 6days (next weekly)
> > Max Start Delay = 6d
> > Max Wait Time = 6d
> > # Do not wait more than 23h (next daily)
> > Incremental Max Wait Time = 23h
> > Schedule = "Planning"
> > Pool = Weekly, Daily
> > }
> > # Autochanger Dell PV132T (21x LTO3)
> > Storage {
> > Name = Autochanger
> > Address = srv-mpp-lrs
> > SDPort = 9103
> > Password = "xxx"
> > Device = Dell-PV132T # must be same as Device in Storage
> > daemon
> > Media Type = LTO3 # must be same as MediaType in
> > Storage daemon
> > Autochanger = yes # enable for autochanger device
> > Maximum Concurrent Jobs = 2
> > }
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
