Hi, 19.07.2007 21:04,, Gustavo Gibson da Silva wrote:: > Arno Lehmann escreveu: >> Hi, >> >> 17.07.2007 14:53,, Gustavo Gibson da Silva wrote:: >>> Hi there, >>> >>> Every once in a while during a migration from a File storage to a tape >>> storage there is the error bellow: >>> >>> 05-Jul 11:05 srv-bkp01-sd: MigraPFita1.2007-07-05_10.23.40 Error: >>> block.c:275 Volume data error at 0:999969406! Wanted ID: "BB02", got >>> "ü^YÚ·". Buffer discarded. ... > This is not a filesystem error. I've tested the entire disk with no > error. However I'm going to see whether this happens on the same file or > not (I have one pool per week day). There is this one volume that is > supposed to be used tomorrow.
Good... then enable tracing at a reasonably high debug level in the SD before the job starts, so you can later see what the SD actually does. Also, perhaps watch the system log for anything disk or file system related while that volume is used. ... >>> What did I do wrong? I'm >>> running bacula 2.0.3, with up to three parallel jobs and volume size >>> limited to 2GB for the file storage and only one job per tape storage. >> Try setting the limit to a little below 2 GB - perhaps it is a file >> system limit. Only likely on FAT, though, because Bacula does not >> always stop writing at exactly the set limit, but could need a few >> bytes more. >> > It runs on a reiserfs 3.6, which doesn't have this limitation. I've > decided to limit the volume size to 2GB in order to minimize damage in > case of a disk failure. There are people saying ReiserFS is not very robust... I can't comment on that, I use ReiserFS, xfs, jfs, ext2/3, and never had problems I could attribute to any of these file systems. > Thank you and sorry for the posting torrent but I've tried to post this > message as an unsubscribed user to the usenet newsgroup several times > before subscribing. Now I've seen a message regarding the "anti-spam" > delay. :-) Posting torrent... yeah :-) Arno > Gustavo. > >> Arno >> >>> I've >>> been upgrading bacula from 1.38, then to 1.39 (mysql changes applied), then >>> to some cvs version that fixed some bugs and now I've upgraded to 2.0.3 to >>> check whether this message would desappear with no success. >>> >>> Thank you, >>> >>> Gustavo. > > -- Arno Lehmann IT-Service Lehmann www.its-lehmann.de ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
