>> 27-Aug 07:34 bacula-sd: GIS_One.2007-08-25_17.35.00 Error: block.c:993 Read >> error on fd=6 at file:blk 0:0 on device >> "VXA3" (/dev/nst0). ERR=Input/output error. > This is weird as this happens when a tape is loaded and has never been > written to. Perhaps the label barcodes command never wrote a label to > the media. That could explain this.
Perhaps that is it. I did use the label barcodes command and Bacula alleged that it had labeled them, but perhaps something went amiss. I have little doubt that the Russians are still aiming their beams at me. >> 27-Aug 07:34 bacula-sd: Please mount Volume "A0000005" on Storage Device >> "VXA3" (/dev/nst0) for Job GIS_One.2007-08-25_17.35.00 >> >> At 8:17 I finally got the tape loaded, as I described, and the backup >> proceded. >> >> And that's all I know right now. I hope not. Do you have any further log where the tape was successfully loaded? No. These are brand-new, never-been-used tapes. -- Tks n rgds, Richard White CNE6, Linux+ Network Engineer Mason County, Washington 360-427-5501 [EMAIL PROTECTED] ------------------------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users